[Thu Mar  8 18:40:54 2012] Detection parameters:
  Position = (265.9, 291.0) = 8 48 59.20 -45 37 21.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 489.7 +/- 42.6
  Background counts = 440.6
  Rate = 0.008 +/- 0.0007

[Thu Mar  8 18:40:56 2012] Off-axis axis estimate = 2.42'
[Fri Mar  9 20:36:01 2012] Using EEF radius (= 7.64 ")to estimate initial spatial extent for simple fitting
[Fri Mar  9 20:36:01 2012] Initial guess for spatial extent in simple fitting = 7.64"
[Fri Mar  9 20:36:01 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.786
[Fri Mar  9 20:36:01 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 7.64"
[Sat Mar 10 02:13:28 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_src12.ximg exists
[Sat Mar 10 02:13:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_src12.csv
[Sat Mar 10 02:13:28 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_src12_1.ximg exists
[Sat Mar 10 02:13:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_src12.csv
[Sat Mar 10 02:13:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 02:13:30 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Sat Mar 10 02:13:30 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Sat Mar 10 02:13:30 2012] Fit fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Sat Mar 10 02:14:27 2012] Source 35 is offset by 0.053285 and 1.792355 pixels which is larger than
2 X fitted extent = 1.769085 x 1.295435, not incorporating fit results
[Sat Mar 10 02:14:27 2012] Warning, spatial fit 12 centroid is now closest to src. 32
[Sat Mar 10 02:14:27 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 02:14:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 02:14:27 2012] Assessing source extent using major
[Sat Mar 10 02:14:27 2012] Source does appear to be extended
[Sat Mar 10 02:14:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 02:14:27 2012] Source is confused with source 32
[Sun Mar 11 07:03:15 2012] Using EEF radius (= 7.64 ")to estimate initial spatial extent for simple fitting
[Sun Mar 11 07:03:15 2012] Initial guess for spatial extent in simple fitting = 7.64"
[Sun Mar 11 07:03:15 2012] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.786
[Sun Mar 11 07:03:15 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 7.64"
[Sun Mar 11 16:11:51 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_src11.ximg exists
[Sun Mar 11 16:11:51 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_src11_1.ximg exists
[Sun Mar 11 16:11:51 2012] Fit fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_src11 appears to have run properly
[Sun Mar 11 16:11:53 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sun Mar 11 16:11:53 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sun Mar 11 16:11:53 2012] Fit fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sun Mar 11 16:13:08 2012] Warning, spatial fit 11 centroid is now closest to src. 32
[Sun Mar 11 16:13:08 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 16:13:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 16:13:08 2012] Assessing source extent using major
[Sun Mar 11 16:13:08 2012] Source does appear to be extended
[Sun Mar 11 16:13:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 06:48:20 2012] XMMSAS src. selection expression = ellipse(23088.383759, 25268.454865, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar 16 06:48:20 2012] Writing source region out to fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src35_src.reg
[Fri Mar 16 06:48:20 2012] Extracting stamp from image fullrun_mos2_xmm0412990201_pi300-10000_cl_sm2.00.img.gz, (228, 253) - (303, 328)
[Fri Mar 16 06:48:21 2012] XMMSAS bgd. selection expression = annulus(23088.383759, 25268.454865, 1087.500000, 2175.000000, X, Y) && !ellipse(25144.486237, 22841.378418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24583.436066, 23004.312256, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23747.900800, 24170.566600, 586.077617, 586.077617, 0.000000, X, Y) && !ellipse(24744.330841, 22582.021881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24136.379578, 24567.062500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25074.028000, 24179.718000, 663.524819, 663.524819, 0.000000, X, Y) && !ellipse(24074.344818, 23706.955139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22805.158000, 25748.344000, 1221.920035, 1221.920035, 0.000000, X, Y) && !ellipse(22367.854000, 25992.044000, 2659.824077, 2659.824077, 0.000000, X, Y) && !ellipse(25284.305389, 23352.232605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27506.486000, 21673.318000, 2657.760076, 2657.760076, 0.000000, X, Y) && !ellipse(20942.743000, 26208.964400, 634.037618, 634.037618, 0.000000, X, Y) && !ellipse(20509.128000, 26443.772000, 1408.304041, 1408.304041, 0.000000, X, Y) && !ellipse(21194.720000, 26103.841800, 1305.920038, 1305.920038, 0.000000, X, Y) && !ellipse(22624.898000, 25817.996000, 1276.728037, 1276.728037, 0.000000, X, Y) && !ellipse(21918.570000, 26362.752000, 2443.840070, 2443.840070, 0.000000, X, Y) && !ellipse(19625.114000, 27518.848000, 1415.000041, 1415.000041, 0.000000, X, Y) && !ellipse(27905.695702, 21046.002978, 2946.000085, 1735.822332, 41.342428, X, Y) && !ellipse(20425.514000, 26578.280000, 2611.840075, 2611.840075, 0.000000, X, Y) && !ellipse(25375.200317, 23788.087524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25930.710000, 23661.323200, 1194.672034, 545.907216, 31.673000, X, Y) && !ellipse(21863.224000, 26607.158000, 2553.456073, 1945.928056, 64.167000, X, Y) && !ellipse(21435.334800, 24974.158600, 693.828020, 693.828020, 0.000000, X, Y)
[Fri Mar 16 06:48:21 2012] Writing fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src35.gif
[Fri Mar 16 06:52:41 2012] Mean detx,y = (-1721.88, -1634.12) 
[Fri Mar 16 06:52:42 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 16 06:52:53 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 16 06:52:54 2012] Setting source spectrum file to fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Fri Mar 16 06:52:54 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src35_bgd.pi.gz
[Fri Mar 16 10:09:18 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Mar 16 10:09:18 2012] rmf not generated due to insufficient counts
[Fri Mar 16 22:36:14 2012] Updating aperture counts using extracted products
[Fri Mar 16 22:36:14 2012] Error reading totcts from fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src35_src_b10.pi.gz
[Fri Mar 16 22:36:16 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 22:36:16 2012] Using photon index=1.80, rate=0.00814, arf fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src35.arf
[Fri Mar 16 22:36:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 22:36:16 2012] Updating source flux to 7.6e-14
[Fri Mar 16 22:46:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting