[Thu Mar  8 18:40:53 2012] Detection parameters:
  Position = (255.7, 299.0) = 8 49 3.47 -45 36 48.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 347.2 +/- 38.1
  Background counts = 411.6
  Rate = 0.006 +/- 0.0007

[Thu Mar  8 18:40:56 2012] Off-axis axis estimate = 3.10'
[Fri Mar  9 20:36:01 2012] Using EEF radius (= 7.98 ")to estimate initial spatial extent for simple fitting
[Fri Mar  9 20:36:01 2012] Initial guess for spatial extent in simple fitting = 7.98"
[Fri Mar  9 20:36:01 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.918
[Fri Mar  9 20:36:01 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 7.98"
[Sat Mar 10 02:13:28 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_src25.ximg exists
[Sat Mar 10 02:13:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_src25.csv
[Sat Mar 10 02:13:28 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_src25_1.ximg exists
[Sat Mar 10 02:13:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_src25.csv
[Sat Mar 10 02:13:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 02:13:30 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Sat Mar 10 02:13:30 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Sat Mar 10 02:13:30 2012] Fit fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Sat Mar 10 02:14:27 2012] Source 29 is offset by 1.248704 and -6.033824 pixels which is larger than
2 X fitted extent = 4.681242 x 4.681242, not incorporating fit results
[Sat Mar 10 02:14:27 2012] Spatial fit model total counts = 6768.260000, observed total counts = 6764.000000
[Sat Mar 10 02:14:27 2012] Offset between fit and detection position for source 29 = 5.239743 pixels
[Sat Mar 10 02:14:27 2012] 6675.227000 total counts/ 5794.370000 bgd. counts: snr = 11.571837
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 5.239743 pixels
  Position = (260.6, 297.3) = 8 49 1.41 -45 36 55.0
  Extent = 16.0 (15.9-31.9)", rotation angle = 0
  Source counts = 880.9 +/- 81.7
  Background counts = 5794.4
  Rate = 0.01 +/- 0.001
[Sat Mar 10 02:14:27 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 02:14:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 02:14:27 2012] Assessing source extent using major axis lower bound
[Sat Mar 10 02:14:27 2012] Source does appear to be extended
[Sat Mar 10 02:14:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 02:14:27 2012] Source is confused with source 32
[Sun Mar 11 07:03:15 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Mar 11 07:03:15 2012] Initial guess for spatial extent in simple fitting = 15.96"
[Sun Mar 11 07:03:15 2012] source mask rpix=3.7, npix_max = 69, mask sum = 72, frac = 1.036
[Sun Mar 11 07:03:15 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 15.96"
[Sun Mar 11 16:11:51 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_src22.ximg exists
[Sun Mar 11 16:11:51 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_src22_1.ximg exists
[Sun Mar 11 16:11:51 2012] Fit fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_src22 appears to have run properly
[Sun Mar 11 16:11:53 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Sun Mar 11 16:11:54 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Sun Mar 11 16:11:54 2012] Fit fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Sun Mar 11 16:13:08 2012] Warning, spatial fit 22 centroid is now closest to src. 33
[Sun Mar 11 16:13:08 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 16:13:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 16:13:08 2012] Assessing source extent using major axis lower bound
[Sun Mar 11 16:13:08 2012] Source does appear to be extended
[Sun Mar 11 16:13:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 06:48:21 2012] XMMSAS src. selection expression = ellipse(22624.898000, 25817.996000, 957.546028, 957.546028, 0.000000, X, Y)
[Fri Mar 16 06:48:21 2012] Writing source region out to fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src29_src.reg
[Fri Mar 16 06:48:21 2012] Extracting stamp from image fullrun_mos2_xmm0412990201_pi300-10000_cl_sm2.00.img.gz, (206, 242) - (316, 352)
[Fri Mar 16 06:48:21 2012] XMMSAS bgd. selection expression = annulus(22624.898000, 25817.996000, 1595.910046, 3191.820092, X, Y) && !ellipse(25144.486237, 22841.378418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24583.436066, 23004.312256, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23747.900800, 24170.566600, 586.077617, 586.077617, 0.000000, X, Y) && !ellipse(24744.330841, 22582.021881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24136.379578, 24567.062500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25074.028000, 24179.718000, 663.524819, 663.524819, 0.000000, X, Y) && !ellipse(24074.344818, 23706.955139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22805.158000, 25748.344000, 1221.920035, 1221.920035, 0.000000, X, Y) && !ellipse(23088.383759, 25268.454865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25450.252686, 22068.373276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22367.854000, 25992.044000, 2659.824077, 2659.824077, 0.000000, X, Y) && !ellipse(25284.305389, 23352.232605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27506.486000, 21673.318000, 2657.760076, 2657.760076, 0.000000, X, Y) && !ellipse(20942.743000, 26208.964400, 634.037618, 634.037618, 0.000000, X, Y) && !ellipse(19298.021000, 27429.934000, 1434.184041, 1434.184041, 0.000000, X, Y) && !ellipse(20509.128000, 26443.772000, 1408.304041, 1408.304041, 0.000000, X, Y) && !ellipse(21194.720000, 26103.841800, 1305.920038, 1305.920038, 0.000000, X, Y) && !ellipse(18312.178000, 28432.212000, 2127.272061, 2127.272061, 0.000000, X, Y) && !ellipse(21918.570000, 26362.752000, 2443.840070, 2443.840070, 0.000000, X, Y) && !ellipse(19625.114000, 27518.848000, 1415.000041, 1415.000041, 0.000000, X, Y) && !ellipse(27905.695702, 21046.002978, 2946.000085, 1735.822332, 41.342428, X, Y) && !ellipse(20425.514000, 26578.280000, 2611.840075, 2611.840075, 0.000000, X, Y) && !ellipse(25375.200317, 23788.087524, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25930.710000, 23661.323200, 1194.672034, 545.907216, 31.673000, X, Y) && !ellipse(21863.224000, 26607.158000, 2553.456073, 1945.928056, 64.167000, X, Y) && !ellipse(18032.280249, 28391.984631, 2659.824077, 2182.580287, 90.063123, X, Y) && !ellipse(17038.620247, 29016.893819, 2631.861980, 2113.987388, 6.136940, X, Y) && !ellipse(17002.276000, 25306.478000, 3428.080099, 1332.664038, 55.282000, X, Y) && !ellipse(17929.832000, 24113.148000, 1590.688046, 1590.688046, 0.000000, X, Y) && !ellipse(21435.334800, 24974.158600, 693.828020, 693.828020, 0.000000, X, Y)
[Fri Mar 16 06:48:21 2012] Writing fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src29.gif
[Fri Mar 16 07:19:27 2012] Mean detx,y = (-2076.41, -2237.16) 
[Fri Mar 16 07:19:28 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 16 07:19:41 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 16 07:19:42 2012] Setting source spectrum file to fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Fri Mar 16 07:19:42 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Fri Mar 16 22:36:14 2012] Updating aperture counts using extracted products
[Fri Mar 16 22:36:15 2012] Error reading totcts from fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Fri Mar 16 22:36:17 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 22:36:17 2012] Using photon index=1.80, rate=0.0141, arf fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src29.arf
[Fri Mar 16 22:36:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 22:36:17 2012] Updating source flux to 1.3e-13
[Fri Mar 16 22:46:31 2012] Flag b found in src. 29 procflags, skipping spectral fitting
[Fri Mar 16 22:46:31 2012] Flag c found in src. 29 procflags, skipping spectral fitting