[Thu Mar  8 18:40:52 2012] Detection parameters:
  Position = (195.2, 328.7) = 8 49 28.48 -45 34 37.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 140.7 +/- 26.4
  Background counts = 307.7
  Rate = 0.004 +/- 0.0007

[Thu Mar  8 18:40:56 2012] Off-axis axis estimate = 7.80'
[Fri Mar  9 20:36:01 2012] Using EEF radius (= 10.33 ")to estimate initial spatial extent for simple fitting
[Fri Mar  9 20:36:01 2012] Initial guess for spatial extent in simple fitting = 10.33"
[Fri Mar  9 20:36:01 2012] source mask rpix=2.4, npix_max = 33, mask sum = 35, frac = 1.059
[Fri Mar  9 20:36:01 2012] Giving source the simple spatial ID 54 for pass 0, mean size = 10.33"
[Sat Mar 10 02:13:29 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_src54.ximg exists
[Sat Mar 10 02:13:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_src54.csv
[Sat Mar 10 02:13:29 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_src54_1.ximg exists
[Sat Mar 10 02:13:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_src54.csv
[Sat Mar 10 02:13:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 02:13:31 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src54.ximg exists
[Sat Mar 10 02:13:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src54.csv
[Sat Mar 10 02:13:31 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src54_1.ximg exists
[Sat Mar 10 02:13:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src54.csv
[Sat Mar 10 02:13:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 02:14:27 2012] Spatial fit model total counts = 4263.370000, observed total counts = 3962.000000
[Sat Mar 10 02:14:27 2012] Offset between fit and detection position for source 14 = 6.618653 pixels
[Sat Mar 10 02:14:27 2012] Warning, changing simple spatial fit ID from 54 to 47
[Sat Mar 10 02:14:27 2012] 4212.566000 total counts/ 3394.980000 bgd. counts: snr = 14.031847
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 6.618653 pixels
  Position = (200.8, 332.3) = 8 49 26.18 -45 34 22.6
  Extent = 19.9 (19.9-39.8)", rotation angle = 0
  Source counts = 817.6 +/- 64.9
  Background counts = 3395.0
  Rate = 0.01 +/- 0.001
[Sat Mar 10 02:14:27 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 02:14:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 02:14:27 2012] Assessing source extent using major axis lower bound
[Sat Mar 10 02:14:27 2012] Source does appear to be extended
[Sat Mar 10 02:14:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 02:14:27 2012] Source is confused with source 16
[Sun Mar 11 07:03:15 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Mar 11 07:03:15 2012] Initial guess for spatial extent in simple fitting = 19.92"
[Sun Mar 11 07:03:15 2012] source mask rpix=4.6, npix_max = 103, mask sum = 47, frac = 0.455
[Sun Mar 11 07:03:15 2012] Skipping simple spatial due to low active detector fraction
[Sun Mar 11 16:13:08 2012] Spatial fit model total counts = 4322.660000, observed total counts = 3962.000000
[Sun Mar 11 16:13:08 2012] Offset between fit and detection position for source 14 = 4.768767 pixels
[Sun Mar 11 16:13:08 2012] Warning, changing simple spatial fit ID from -1 to 43
[Sun Mar 11 16:13:08 2012] 4333.318000 total counts/ 3407.690000 bgd. counts: snr = 15.856468
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 4.768767 pixels
  Position = (196.4, 334.1) = 8 49 28.00 -45 34 14.6
  Extent = 32.9" x 26.4", rotation angle = 6
  Source counts = 925.6 +/- 65.8
  Background counts = 3407.7
  Rate = 0.01 +/- 0.001
[Sun Mar 11 16:13:08 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 16:13:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 16:13:08 2012] Assessing source extent using major
[Sun Mar 11 16:13:08 2012] Source does appear to be extended
[Sun Mar 11 16:13:08 2012] Computing asymmetry using major and minor axis, asym = 1.24
[Fri Mar 16 06:48:24 2012] XMMSAS src. selection expression = ellipse(17038.620247, 29016.893819, 1973.896485, 1585.490541, 6.136940, X, Y)
[Fri Mar 16 06:48:24 2012] Writing source region out to fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src14_src.reg
[Fri Mar 16 06:48:24 2012] Extracting stamp from image fullrun_mos2_xmm0412990201_pi300-10000_cl_sm2.00.img.gz, (83, 221) - (310, 448)
[Fri Mar 16 06:48:24 2012] XMMSAS bgd. selection expression = annulus(17038.620247, 29016.893819, 3289.827475, 6579.654951, X, Y) && !ellipse(23747.900800, 24170.566600, 586.077617, 586.077617, 0.000000, X, Y) && !ellipse(24136.379578, 24567.062500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24074.344818, 23706.955139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22805.158000, 25748.344000, 1221.920035, 1221.920035, 0.000000, X, Y) && !ellipse(23088.383759, 25268.454865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22367.854000, 25992.044000, 2659.824077, 2659.824077, 0.000000, X, Y) && !ellipse(20942.743000, 26208.964400, 634.037618, 634.037618, 0.000000, X, Y) && !ellipse(19298.021000, 27429.934000, 1434.184041, 1434.184041, 0.000000, X, Y) && !ellipse(20509.128000, 26443.772000, 1408.304041, 1408.304041, 0.000000, X, Y) && !ellipse(21194.720000, 26103.841800, 1305.920038, 1305.920038, 0.000000, X, Y) && !ellipse(22624.898000, 25817.996000, 1276.728037, 1276.728037, 0.000000, X, Y) && !ellipse(18312.178000, 28432.212000, 2127.272061, 2127.272061, 0.000000, X, Y) && !ellipse(21918.570000, 26362.752000, 2443.840070, 2443.840070, 0.000000, X, Y) && !ellipse(17096.768000, 25117.132000, 1638.808047, 1638.808047, 0.000000, X, Y) && !ellipse(19625.114000, 27518.848000, 1415.000041, 1415.000041, 0.000000, X, Y) && !ellipse(16790.736000, 25544.544000, 1617.992047, 1617.992047, 0.000000, X, Y) && !ellipse(20425.514000, 26578.280000, 2611.840075, 2611.840075, 0.000000, X, Y) && !ellipse(21863.224000, 26607.158000, 2553.456073, 1945.928056, 64.167000, X, Y) && !ellipse(24324.448578, 31155.483185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11074.464470, 32068.083130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16169.372000, 26283.442000, 1714.040049, 1714.040049, 0.000000, X, Y) && !ellipse(18032.280249, 28391.984631, 2659.824077, 2182.580287, 90.063123, X, Y) && !ellipse(17779.400452, 27788.513092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16045.442000, 26371.374000, 3277.824094, 3277.824094, 0.000000, X, Y) && !ellipse(16381.160000, 26144.772000, 1677.632048, 1677.632048, 0.000000, X, Y) && !ellipse(17002.276000, 25306.478000, 3428.080099, 1332.664038, 55.282000, X, Y) && !ellipse(17929.832000, 24113.148000, 1590.688046, 1590.688046, 0.000000, X, Y) && !ellipse(21435.334800, 24974.158600, 693.828020, 693.828020, 0.000000, X, Y) && !ellipse(10641.737175, 32662.870758, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Mar 16 06:48:24 2012] Writing fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src14.gif
[Fri Mar 16 09:08:02 2012] Mean detx,y = (-6744.83, -6535.07) 
[Fri Mar 16 09:08:06 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 16 09:09:21 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 16 09:09:21 2012] Setting source spectrum file to fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Fri Mar 16 09:09:21 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Fri Mar 16 22:36:15 2012] Updating aperture counts using extracted products
[Fri Mar 16 22:36:15 2012] Error reading totcts from fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Fri Mar 16 22:36:17 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 22:36:17 2012] Using photon index=1.80, rate=0.0148, arf fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src14.arf
[Fri Mar 16 22:36:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 22:36:17 2012] Getting flux using calc_pl_flux failed
[Fri Mar 16 22:46:31 2012] Flag c found in src. 14 procflags, skipping spectral fitting