[Thu Mar  8 18:40:52 2012] Detection parameters:
  Position = (324.5, 371.3) = 8 48 34.95 -45 31 32.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 156.6 +/- 23.0
  Background counts = 198.2
  Rate = 0.004 +/- 0.0006

[Thu Mar  8 18:40:56 2012] Off-axis axis estimate = 5.61'
[Fri Mar  9 20:36:01 2012] Using EEF radius (= 9.23 ")to estimate initial spatial extent for simple fitting
[Fri Mar  9 20:36:01 2012] Initial guess for spatial extent in simple fitting = 9.23"
[Fri Mar  9 20:36:01 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.909
[Fri Mar  9 20:36:01 2012] Giving source the simple spatial ID 50 for pass 0, mean size = 9.23"
[Sat Mar 10 02:13:29 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_src50.ximg exists
[Sat Mar 10 02:13:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_src50.csv
[Sat Mar 10 02:13:29 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_src50_1.ximg exists
[Sat Mar 10 02:13:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_src50.csv
[Sat Mar 10 02:13:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 02:13:30 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Sat Mar 10 02:13:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src50.csv
[Sat Mar 10 02:13:30 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Sat Mar 10 02:13:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src50.csv
[Sat Mar 10 02:13:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 02:14:27 2012] Spatial fit model total counts = 2216.530000, observed total counts = 1782.000000
[Sat Mar 10 02:14:27 2012] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Mar 10 02:14:27 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 02:14:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 02:14:27 2012] Assessing source extent using major
[Sat Mar 10 02:14:27 2012] Source does appear to be extended
[Sat Mar 10 02:14:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 11 07:03:15 2012] Using EEF radius (= 9.23 ")to estimate initial spatial extent for simple fitting
[Sun Mar 11 07:03:15 2012] Initial guess for spatial extent in simple fitting = 9.23"
[Sun Mar 11 07:03:15 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.909
[Sun Mar 11 07:03:15 2012] Giving source the simple spatial ID 46 for pass 1, mean size = 9.23"
[Sun Mar 11 16:11:52 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_src46.ximg exists
[Sun Mar 11 16:11:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_src46.csv
[Sun Mar 11 16:11:52 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_src46_1.ximg exists
[Sun Mar 11 16:11:52 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_src46.csv
[Sun Mar 11 16:11:52 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 16:11:55 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src46.ximg exists
[Sun Mar 11 16:11:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src46.csv
[Sun Mar 11 16:11:55 2012] fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src46_1.ximg exists
[Sun Mar 11 16:11:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src46.csv
[Sun Mar 11 16:11:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 16:13:08 2012] Warning: source 46 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 10 at 11.731451 pixels away
[Sun Mar 11 16:13:08 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 16:13:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 16:13:08 2012] Assessing source extent using major
[Sun Mar 11 16:13:08 2012] Source does appear to be extended
[Sun Mar 11 16:13:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 16 06:48:23 2012] XMMSAS src. selection expression = ellipse(28180.945007, 32252.339508, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Mar 16 06:48:23 2012] Writing source region out to fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src10_src.reg
[Fri Mar 16 06:48:23 2012] Extracting stamp from image fullrun_mos2_xmm0412990201_pi300-10000_cl_sm2.00.img.gz, (287, 334) - (362, 409)
[Fri Mar 16 06:48:23 2012] XMMSAS bgd. selection expression = annulus(28180.945007, 32252.339508, 1087.500000, 2175.000000, X, Y)
[Fri Mar 16 06:48:23 2012] Writing fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src10.gif
[Fri Mar 16 08:55:53 2012] Mean detx,y = (4862.08, -7326.79) 
[Fri Mar 16 08:55:56 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Mar 16 08:56:26 2012] Binned source spectrum to 10 counts/bin
[Fri Mar 16 08:56:26 2012] Setting source spectrum file to fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Mar 16 08:56:26 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Fri Mar 16 21:41:53 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Mar 16 21:41:53 2012] rmf not generated due to insufficient counts
[Fri Mar 16 22:36:15 2012] Updating aperture counts using extracted products
[Fri Mar 16 22:36:15 2012] Error reading totcts from fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Mar 16 22:36:17 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 22:36:17 2012] Using photon index=1.80, rate=0.00388, arf fullrun_mos2_xmm0412990201_pi300-10000_pass1_cl_src10.arf
[Fri Mar 16 22:36:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 22:36:17 2012] Updating source flux to 5.9e-14
[Fri Mar 16 22:46:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting