[Thu Mar  8 18:39:52 2012] Detection parameters:
  Position = (271.9, 288.9) = 8 48 56.71 -45 37 31.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 490.2 +/- 42.6
  Background counts = 429.6
  Rate = 0.008 +/- 0.0007

[Thu Mar  8 18:39:56 2012] Off-axis axis estimate = 2.04'
[Fri Mar  9 12:30:38 2012] Using EEF radius (= 7.45 ")to estimate initial spatial extent for simple fitting
[Fri Mar  9 12:30:38 2012] Initial guess for spatial extent in simple fitting = 7.45"
[Fri Mar  9 12:30:38 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.817
[Fri Mar  9 12:30:38 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 7.45"
[Fri Mar  9 20:35:57 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src15.ximg exists
[Fri Mar  9 20:35:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src15.csv
[Fri Mar  9 20:35:57 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src15_1.ximg exists
[Fri Mar  9 20:35:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src15.csv
[Fri Mar  9 20:35:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 20:35:59 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Fri Mar  9 20:35:59 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Fri Mar  9 20:35:59 2012] Fit fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Sat Mar 10 02:14:11 2012] Source 9 is offset by 1.239984 and 5.758664 pixels which is larger than
2 X fitted extent = 1.168345 x 1.168345, not incorporating fit results
[Sat Mar 10 02:14:11 2012] Warning, spatial fit 15 centroid is now closest to src. 6
[Sat Mar 10 02:14:11 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 02:14:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 02:14:11 2012] Assessing source extent using major
[Sat Mar 10 02:14:11 2012] Source does appear to be extended
[Sat Mar 10 02:14:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 02:14:11 2012] Source is confused with source 6
[Sat Mar 10 23:47:45 2012] Using EEF radius (= 7.45 ")to estimate initial spatial extent for simple fitting
[Sat Mar 10 23:47:45 2012] Initial guess for spatial extent in simple fitting = 7.45"
[Sat Mar 10 23:47:45 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.817
[Sat Mar 10 23:47:45 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 7.45"
[Sun Mar 11 07:03:11 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src14.ximg exists
[Sun Mar 11 07:03:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src14.csv
[Sun Mar 11 07:03:11 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src14_1.ximg exists
[Sun Mar 11 07:03:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src14.csv
[Sun Mar 11 07:03:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 07:03:13 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Sun Mar 11 07:03:13 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Sun Mar 11 07:03:13 2012] Fit fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Sun Mar 11 16:12:51 2012] Source 9 is offset by 0.775800 and -7.094623 pixels which is larger than
2 X fitted extent = 1.327117 x 1.327117, not incorporating fit results
[Sun Mar 11 16:12:51 2012] Warning, spatial fit 14 centroid is now closest to src. 6
[Sun Mar 11 16:12:51 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 16:12:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 16:12:51 2012] Assessing source extent using major
[Sun Mar 11 16:12:51 2012] Source does appear to be extended
[Sun Mar 11 16:12:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 14 09:46:23 2012] XMMSAS src. selection expression = ellipse(23610.500580, 25084.057770, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Mar 14 09:46:23 2012] Writing source region out to fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src9_src.reg
[Wed Mar 14 09:46:23 2012] Extracting stamp from image fullrun_mos1_xmm0412990201_pi300-10000_cl_sm2.00.img.gz, (234, 251) - (309, 326)
[Wed Mar 14 09:46:23 2012] XMMSAS bgd. selection expression = annulus(23610.500580, 25084.057770, 1087.500000, 2175.000000, X, Y) && !ellipse(24897.984000, 22866.394000, 1285.792037, 1285.792037, 0.000000, X, Y) && !ellipse(25160.987244, 22131.714310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24271.290000, 23397.112000, 2571.584074, 2571.584074, 0.000000, X, Y) && !ellipse(24667.842000, 22992.686000, 2446.688070, 2446.688070, 0.000000, X, Y) && !ellipse(25933.631200, 22296.598000, 1308.344038, 1308.344038, 0.000000, X, Y) && !ellipse(22910.092000, 25464.926000, 1191.928034, 1191.928034, 0.000000, X, Y) && !ellipse(23193.536000, 24646.464000, 1191.928034, 746.223672, 0.000000, X, Y) && !ellipse(24129.514800, 24762.571600, 1171.224034, 673.042419, 211.042000, X, Y) && !ellipse(23530.432000, 24424.430000, 2437.744070, 1872.392054, 239.340000, X, Y) && !ellipse(22693.224000, 25776.794000, 2073.736060, 2073.736060, 0.000000, X, Y) && !ellipse(24637.107400, 24472.067000, 1157.944033, 1157.944033, 0.000000, X, Y) && !ellipse(27231.772000, 22044.294000, 2644.240076, 2644.240076, 0.000000, X, Y) && !ellipse(26852.550000, 21640.130000, 2535.344073, 2535.344073, 0.000000, X, Y) && !ellipse(21135.972000, 26176.934000, 1294.976037, 1294.976037, 0.000000, X, Y) && !ellipse(27632.180440, 21884.655730, 2581.920074, 585.073727, 52.178202, X, Y) && !ellipse(26265.914000, 23388.826000, 1227.192035, 1227.192035, 0.000000, X, Y) && !ellipse(22385.092000, 26176.172000, 2383.856069, 2383.856069, 0.000000, X, Y) && !ellipse(20645.224000, 26443.074000, 1344.368039, 1344.368039, 0.000000, X, Y) && !ellipse(25578.934000, 23314.642000, 2454.384071, 2454.384071, 0.000000, X, Y) && !ellipse(20472.282000, 26620.680000, 2589.952075, 2589.952075, 0.000000, X, Y) && !ellipse(23618.789581, 23012.404785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21342.104000, 26680.566000, 1327.768038, 1327.768038, 0.000000, X, Y) && !ellipse(22143.571671, 24433.187958, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 14 09:46:23 2012] Writing fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src9.gif
[Wed Mar 14 10:47:16 2012] Mean detx,y = (-1108.25, 1110.31) 
[Wed Mar 14 10:47:18 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 14 10:47:34 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 14 10:47:35 2012] Setting source spectrum file to fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Wed Mar 14 10:47:35 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Wed Mar 14 21:16:30 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Mar 14 21:16:30 2012] rmf not generated due to insufficient counts
[Fri Mar 16 22:36:10 2012] Updating aperture counts using extracted products
[Fri Mar 16 22:36:10 2012] Error reading totcts from fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri Mar 16 22:36:12 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 22:36:12 2012] Using photon index=1.80, rate=0.0081, arf fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src9.arf
[Fri Mar 16 22:36:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 22:36:12 2012] Updating source flux to 7.8e-14
[Fri Mar 16 22:36:20 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting