[Thu Mar  8 18:39:56 2012] Detection parameters:
  Position = (361.4, 194.1) = 8 48 19.57 -45 44 24.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 144.9 +/- 23.7
  Background counts = 185.4
  Rate = 0.004 +/- 0.0007

[Thu Mar  8 18:39:56 2012] Off-axis axis estimate = 8.83'
[Fri Mar  9 12:30:38 2012] Using EEF radius (= 10.85 ")to estimate initial spatial extent for simple fitting
[Fri Mar  9 12:30:38 2012] Initial guess for spatial extent in simple fitting = 10.85"
[Fri Mar  9 12:30:38 2012] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.004
[Fri Mar  9 12:30:38 2012] Giving source the simple spatial ID 52 for pass 0, mean size = 10.85"
[Fri Mar  9 20:35:58 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src52.ximg exists
[Fri Mar  9 20:35:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src52.csv
[Fri Mar  9 20:35:58 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src52_1.ximg exists
[Fri Mar  9 20:35:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src52.csv
[Fri Mar  9 20:35:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 20:36:00 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src52.ximg exists
[Fri Mar  9 20:36:00 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src52_1.ximg exists
[Fri Mar  9 20:36:00 2012] Fit fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src52 appears to have run properly
[Sat Mar 10 02:14:11 2012] Spatial fit model total counts = 2758.830000, observed total counts = 2762.000000
[Sat Mar 10 02:14:11 2012] Offset between fit and detection position for source 74 = 9.466446 pixels
[Sat Mar 10 02:14:11 2012] 2810.961000 total counts/ 2696.750000 bgd. counts: snr = 2.199316
Spatial fit parameters:
  Offset between fit and detection position for source 74 = 9.466446 pixels
  Position = (355.0, 187.1) = 8 48 22.23 -45 44 54.2
  Extent = 20.1 (16.8-21.7)", rotation angle = 0
  Source counts = 114.2 +/- 53.0
  Background counts = 2696.8
  Rate = 0.002 +/- 0.0008
[Sat Mar 10 02:14:11 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 02:14:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 02:14:11 2012] Assessing source extent using major axis lower bound
[Sat Mar 10 02:14:11 2012] Source does appear to be extended
[Sat Mar 10 02:14:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 02:14:11 2012] Source is confused with source 53
[Sat Mar 10 23:47:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Mar 10 23:47:45 2012] Initial guess for spatial extent in simple fitting = 20.05"
[Sat Mar 10 23:47:45 2012] source mask rpix=4.6, npix_max = 104, mask sum = 100, frac = 0.958
[Sat Mar 10 23:47:45 2012] Giving source the simple spatial ID 48 for pass 1, mean size = 20.05"
[Sun Mar 11 07:03:12 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src48.ximg exists
[Sun Mar 11 07:03:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src48.csv
[Sun Mar 11 07:03:12 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src48_1.ximg exists
[Sun Mar 11 07:03:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src48.csv
[Sun Mar 11 07:03:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 07:03:14 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Sun Mar 11 07:03:14 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Sun Mar 11 07:03:14 2012] Fit fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src48 appears to have run properly
[Sun Mar 11 16:12:51 2012] Warning: source 48 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 74 at 21.216783 pixels away
[Sun Mar 11 16:12:51 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 16:12:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 16:12:51 2012] Assessing source extent using major axis lower bound
[Sun Mar 11 16:12:51 2012] Source does appear to be extended
[Sun Mar 11 16:12:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar 11 16:12:51 2012] Deleting source due to low Poisson probability 0.9