[Thu Mar  8 18:39:56 2012] Detection parameters:
  Position = (341.3, 207.1) = 8 48 27.93 -45 43 24.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 211.3 +/- 22.4
  Background counts = 173.6
  Rate = 0.006 +/- 0.0006

[Thu Mar  8 18:39:56 2012] Off-axis axis estimate = 7.32'
[Fri Mar  9 12:30:38 2012] Using EEF radius (= 10.09 ")to estimate initial spatial extent for simple fitting
[Fri Mar  9 12:30:38 2012] Initial guess for spatial extent in simple fitting = 10.09"
[Fri Mar  9 12:30:38 2012] source mask rpix=2.3, npix_max = 31, mask sum = 31, frac = 0.975
[Fri Mar  9 12:30:38 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 10.09"
[Fri Mar  9 20:35:57 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src31.ximg exists
[Fri Mar  9 20:35:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src31.csv
[Fri Mar  9 20:35:58 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src31_1.ximg exists
[Fri Mar  9 20:35:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src31.csv
[Fri Mar  9 20:35:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 20:36:00 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Fri Mar  9 20:36:00 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Fri Mar  9 20:36:00 2012] Fit fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Sat Mar 10 02:14:11 2012] Source 67 is offset by -0.637038 and 3.079570 pixels which is larger than
2 X fitted extent = 1.440662 x 1.440662, not incorporating fit results
[Sat Mar 10 02:14:11 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 02:14:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 02:14:11 2012] Assessing source extent using major
[Sat Mar 10 02:14:11 2012] Source does appear to be extended
[Sat Mar 10 02:14:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 02:14:11 2012] Source is confused with source 62
[Sat Mar 10 02:14:11 2012] Source is confused with source 65
[Sat Mar 10 23:47:45 2012] Using EEF radius (= 10.09 ")to estimate initial spatial extent for simple fitting
[Sat Mar 10 23:47:45 2012] Initial guess for spatial extent in simple fitting = 10.09"
[Sat Mar 10 23:47:45 2012] source mask rpix=2.3, npix_max = 31, mask sum = 31, frac = 0.975
[Sat Mar 10 23:47:45 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 10.09"
[Sun Mar 11 07:03:12 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src29.ximg exists
[Sun Mar 11 07:03:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src29.csv
[Sun Mar 11 07:03:12 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src29_1.ximg exists
[Sun Mar 11 07:03:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src29.csv
[Sun Mar 11 07:03:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 07:03:14 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Sun Mar 11 07:03:14 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Sun Mar 11 07:03:14 2012] Fit fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Sun Mar 11 16:12:51 2012] Spatial fit model total counts = 2700.870000, observed total counts = 2505.000000
[Sun Mar 11 16:12:51 2012] Offset between fit and detection position for source 67 = 0.624148 pixels
[Sun Mar 11 16:12:51 2012] 2505.118700 total counts/ 2459.980000 bgd. counts: snr = 0.910088
Spatial fit parameters:
  Offset between fit and detection position for source 67 = 0.624148 pixels
  Position = (341.0, 207.6) = 8 48 28.04 -45 43 25.1
  Extent = 3.4 (2.5-5.2)", rotation angle = 0
  Source counts = 45.1 +/- 50.1
  Background counts = 2460.0
  Rate = 0.0007 +/- 0.0008
  Deleting source due to low Poisson probability