[Thu Mar  8 18:39:55 2012] Detection parameters:
  Position = (348.6, 209.1) = 8 48 24.90 -45 43 19.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 138.3 +/- 24.6
  Background counts = 206.0
  Rate = 0.004 +/- 0.0006

[Thu Mar  8 18:39:56 2012] Off-axis axis estimate = 7.43'
[Fri Mar  9 12:30:38 2012] Using EEF radius (= 10.14 ")to estimate initial spatial extent for simple fitting
[Fri Mar  9 12:30:38 2012] Initial guess for spatial extent in simple fitting = 10.14"
[Fri Mar  9 12:30:38 2012] source mask rpix=2.3, npix_max = 32, mask sum = 30, frac = 0.935
[Fri Mar  9 12:30:38 2012] Giving source the simple spatial ID 61 for pass 0, mean size = 10.14"
[Fri Mar  9 20:35:58 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src61.ximg exists
[Fri Mar  9 20:35:58 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src61_1.ximg exists
[Fri Mar  9 20:35:58 2012] Fit fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src61 appears to have run properly
[Fri Mar  9 20:36:00 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Fri Mar  9 20:36:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src61.csv
[Fri Mar  9 20:36:00 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Fri Mar  9 20:36:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src61.csv
[Fri Mar  9 20:36:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 02:14:11 2012] Source 66 is offset by 4.139211 and -5.489018 pixels which is larger than
2 X fitted extent = 1.195936 x 1.195936, not incorporating fit results
[Sat Mar 10 02:14:11 2012] Spatial fit model total counts = 3190.800000, observed total counts = 2790.000000
[Sat Mar 10 02:14:11 2012] Poor agreement between spatial fit and data for source 66
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Mar 10 02:14:11 2012] Warning, spatial fit 61 centroid is now closest to src. 69
[Sat Mar 10 02:14:11 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 02:14:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 02:14:11 2012] Assessing source extent using major
[Sat Mar 10 02:14:11 2012] Source does appear to be extended
[Sat Mar 10 02:14:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 02:14:11 2012] Source is confused with source 68
[Sat Mar 10 02:14:11 2012] Source is confused with source 62
[Sat Mar 10 02:14:11 2012] Source is confused with source 65
[Sat Mar 10 23:47:45 2012] Using EEF radius (= 10.14 ")to estimate initial spatial extent for simple fitting
[Sat Mar 10 23:47:45 2012] Initial guess for spatial extent in simple fitting = 10.14"
[Sat Mar 10 23:47:45 2012] source mask rpix=2.3, npix_max = 32, mask sum = 30, frac = 0.935
[Sat Mar 10 23:47:45 2012] Giving source the simple spatial ID 55 for pass 1, mean size = 10.14"
[Sun Mar 11 07:03:13 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src55.ximg exists
[Sun Mar 11 07:03:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src55.csv
[Sun Mar 11 07:03:13 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src55_1.ximg exists
[Sun Mar 11 07:03:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src55.csv
[Sun Mar 11 07:03:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 07:03:15 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src55.ximg exists
[Sun Mar 11 07:03:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src55.csv
[Sun Mar 11 07:03:15 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src55_1.ximg exists
[Sun Mar 11 07:03:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src55.csv
[Sun Mar 11 07:03:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src55_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src55.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 16:12:51 2012] Spatial fit model total counts = 9649.760000, observed total counts = 9555.000000
[Sun Mar 11 16:12:51 2012] Offset between fit and detection position for source 66 = 3.172172 pixels
[Sun Mar 11 16:12:51 2012] Warning, changing simple spatial fit ID from 55 to 25
[Sun Mar 11 16:12:51 2012] 9010.290000 total counts/ 6311.580000 bgd. counts: snr = 33.969345
Spatial fit parameters:
  Offset between fit and detection position for source 66 = 3.172172 pixels
  Position = (349.7, 212.0) = 8 48 24.44 -45 43 5.9
  Extent = 44.0 (43.9-87.9)", rotation angle = 0
  Source counts = 2698.7 +/- 94.9
  Background counts = 6311.6
  Rate = 0.04 +/- 0.002
[Sun Mar 11 16:12:51 2012] Spatial fit model total counts = 4175.070000, observed total counts = 4203.000000
[Sun Mar 11 16:12:51 2012] Offset between fit and detection position for source 66 = 0.273258 pixels
[Sun Mar 11 16:12:51 2012] Warning, changing simple spatial fit ID from 25 to 39
[Sun Mar 11 16:12:51 2012] 3677.908000 total counts/ 3139.820000 bgd. counts: snr = 9.602867
Spatial fit parameters:
  Offset between fit and detection position for source 66 = 0.273258 pixels
  Position = (350.0, 212.0) = 8 48 24.33 -45 43 5.9
  Extent = 20.8 (20.8-41.6)", rotation angle = 0
  Source counts = 538.1 +/- 60.6
  Background counts = 3139.8
  Rate = 0.009 +/- 0.001
[Sun Mar 11 16:12:51 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 16:12:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 16:12:51 2012] Assessing source extent using major axis lower bound
[Sun Mar 11 16:12:51 2012] Source does appear to be extended
[Sun Mar 11 16:12:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 14 09:46:27 2012] XMMSAS src. selection expression = ellipse(30398.420000, 18398.946000, 1248.558036, 1248.558036, 0.000000, X, Y)
[Wed Mar 14 09:46:27 2012] Writing source region out to fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src66_src.reg
[Wed Mar 14 09:46:27 2012] Extracting stamp from image fullrun_mos1_xmm0412990201_pi300-10000_cl_sm2.00.img.gz, (278, 140) - (422, 284)
[Wed Mar 14 09:46:27 2012] XMMSAS bgd. selection expression = annulus(30398.420000, 18398.946000, 2080.930060, 4161.860120, X, Y) && !ellipse(25985.596000, 20519.094000, 1366.088039, 1366.088039, 0.000000, X, Y) && !ellipse(24271.290000, 23397.112000, 2571.584074, 2571.584074, 0.000000, X, Y) && !ellipse(24667.842000, 22992.686000, 2446.688070, 2446.688070, 0.000000, X, Y) && !ellipse(25933.631200, 22296.598000, 1308.344038, 1308.344038, 0.000000, X, Y) && !ellipse(27939.402000, 21414.802000, 1322.120038, 1322.120038, 0.000000, X, Y) && !ellipse(28644.954000, 20418.646000, 1478.008043, 1478.008043, 0.000000, X, Y) && !ellipse(27231.772000, 22044.294000, 2644.240076, 2644.240076, 0.000000, X, Y) && !ellipse(26852.550000, 21640.130000, 2535.344073, 2535.344073, 0.000000, X, Y) && !ellipse(29072.016000, 19851.626000, 3066.064088, 3066.064088, 0.000000, X, Y) && !ellipse(27229.127600, 22308.802266, 1290.960037, 1290.960037, 0.000000, X, Y) && !ellipse(29598.798000, 19078.266000, 3355.072097, 3355.072097, 0.000000, X, Y) && !ellipse(26678.708191, 23035.644257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31612.874000, 17424.894000, 1758.920051, 1758.920051, 0.000000, X, Y) && !ellipse(27632.180440, 21884.655730, 2581.920074, 585.073727, 52.178202, X, Y) && !ellipse(26265.914000, 23388.826000, 1227.192035, 1227.192035, 0.000000, X, Y) && !ellipse(31208.420000, 17798.584000, 1714.032049, 1714.032049, 0.000000, X, Y) && !ellipse(27909.850586, 20226.775925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25578.934000, 23314.642000, 2454.384071, 2454.384071, 0.000000, X, Y) && !ellipse(32751.490000, 16499.744000, 1759.584051, 1759.584051, 0.000000, X, Y) && !ellipse(25849.308899, 21708.558395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30121.148000, 18890.482000, 2956.016085, 2956.016085, 0.000000, X, Y) && !ellipse(30782.308197, 17707.244720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27824.709800, 17063.808000, 566.833616, 566.833616, 0.000000, X, Y) && !ellipse(30819.732000, 18265.856000, 1677.536048, 1677.536048, 0.000000, X, Y) && !ellipse(31893.692000, 16938.490000, 3428.064099, 3428.064099, 0.000000, X, Y) && !ellipse(27151.433200, 19593.436000, 1429.488041, 1429.488041, 0.000000, X, Y) && !ellipse(27219.835022, 20044.865265, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31242.738600, 15120.268000, 1737.664050, 1737.664050, 0.000000, X, Y)
[Wed Mar 14 09:46:27 2012] Writing fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src66.gif
[Wed Mar 14 13:41:21 2012] Mean detx,y = (6968.05, -3878.57) 
[Wed Mar 14 13:41:24 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 14 13:42:30 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 14 13:42:31 2012] Setting source spectrum file to fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src66_src_b10.pi.gz
[Wed Mar 14 13:42:31 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src66_bgd.pi.gz
[Fri Mar 16 22:36:11 2012] Updating aperture counts using extracted products
[Fri Mar 16 22:36:11 2012] Error reading totcts from fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src66_src_b10.pi.gz
[Fri Mar 16 22:36:13 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 22:36:13 2012] Using photon index=1.80, rate=0.0086, arf fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src66.arf
[Fri Mar 16 22:36:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 22:36:13 2012] Updating source flux to 1.2e-13
[Fri Mar 16 22:36:20 2012] Flag b found in src. 66 procflags, skipping spectral fitting
[Fri Mar 16 22:36:20 2012] Flag p found in src. 66 procflags, skipping spectral fitting
[Fri Mar 16 22:36:20 2012] Flag c found in src. 66 procflags, skipping spectral fitting