[Thu Mar  8 18:39:55 2012] Detection parameters:
  Position = (315.3, 225.9) = 8 48 38.71 -45 42 7.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 180.5 +/- 29.2
  Background counts = 298.9
  Rate = 0.004 +/- 0.0006

[Thu Mar  8 18:39:56 2012] Off-axis axis estimate = 5.40'
[Fri Mar  9 12:30:38 2012] Using EEF radius (= 9.13 ")to estimate initial spatial extent for simple fitting
[Fri Mar  9 12:30:38 2012] Initial guess for spatial extent in simple fitting = 9.13"
[Fri Mar  9 12:30:38 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.111
[Fri Mar  9 12:30:38 2012] Giving source the simple spatial ID 60 for pass 0, mean size = 9.13"
[Fri Mar  9 20:35:58 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src60.ximg exists
[Fri Mar  9 20:35:58 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src60_1.ximg exists
[Fri Mar  9 20:35:58 2012] Fit fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src60 appears to have run properly
[Fri Mar  9 20:36:00 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src60.ximg exists
[Fri Mar  9 20:36:00 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src60_1.ximg exists
[Fri Mar  9 20:36:00 2012] Fit fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src60 appears to have run properly
[Sat Mar 10 02:14:11 2012] Spatial fit model total counts = 4189.280000, observed total counts = 4175.000000
[Sat Mar 10 02:14:11 2012] Offset between fit and detection position for source 61 = 5.318726 pixels
[Sat Mar 10 02:14:11 2012] 4204.701000 total counts/ 3730.620000 bgd. counts: snr = 7.761793
Spatial fit parameters:
  Offset between fit and detection position for source 61 = 5.318726 pixels
  Position = (310.0, 225.9) = 8 48 40.92 -45 42 5.6
  Extent = 18.3 (18.2-36.5)", rotation angle = 0
  Source counts = 474.1 +/- 64.8
  Background counts = 3730.6
  Rate = 0.008 +/- 0.001
[Sat Mar 10 02:14:11 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 02:14:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 02:14:11 2012] Assessing source extent using major axis lower bound
[Sat Mar 10 02:14:11 2012] Source does appear to be extended
[Sat Mar 10 02:14:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 02:14:11 2012] Source is confused with source 59
[Sat Mar 10 02:14:11 2012] Source is confused with source 63
[Sat Mar 10 23:47:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Mar 10 23:47:45 2012] Initial guess for spatial extent in simple fitting = 18.25"
[Sat Mar 10 23:47:45 2012] source mask rpix=4.2, npix_max = 88, mask sum = 100, frac = 1.133
[Sat Mar 10 23:47:45 2012] Giving source the simple spatial ID 54 for pass 1, mean size = 18.25"
[Sun Mar 11 07:03:13 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src54.ximg exists
[Sun Mar 11 07:03:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src54.csv
[Sun Mar 11 07:03:13 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src54_1.ximg exists
[Sun Mar 11 07:03:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src54.csv
[Sun Mar 11 07:03:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src54_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 07:03:14 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src54.ximg exists
[Sun Mar 11 07:03:14 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src54_1.ximg exists
[Sun Mar 11 07:03:15 2012] Fit fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src54 appears to have run properly
[Sun Mar 11 16:12:51 2012] Warning, spatial fit 54 centroid is now closest to src. 24
[Sun Mar 11 16:12:51 2012] Spatial fit model total counts = 4069.490000, observed total counts = 4069.000000
[Sun Mar 11 16:12:51 2012] Offset between fit and detection position for source 61 = 2.620090 pixels
[Sun Mar 11 16:12:51 2012] Warning, changing simple spatial fit ID from 54 to 61
[Sun Mar 11 16:12:51 2012] 4061.696000 total counts/ 3658.120000 bgd. counts: snr = 6.672619
Spatial fit parameters:
  Offset between fit and detection position for source 61 = 2.620090 pixels
  Position = (312.6, 225.8) = 8 48 39.83 -45 42 6.3
  Extent = 17.9 (17.8-35.7)", rotation angle = 0
  Source counts = 403.6 +/- 63.7
  Background counts = 3658.1
  Rate = 0.006 +/- 0.001
[Sun Mar 11 16:12:51 2012] Source 61 is offset by -2.308722 and 0.170207 pixels which is larger than
2 X fitted extent = 1.078515 x 1.078515, not incorporating fit results
[Sun Mar 11 16:12:51 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 16:12:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 16:12:51 2012] Assessing source extent using major axis lower bound
[Sun Mar 11 16:12:51 2012] Source does appear to be extended
[Sun Mar 11 16:12:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 14 09:46:27 2012] XMMSAS src. selection expression = ellipse(27151.433200, 19593.436000, 1072.116031, 1072.116031, 0.000000, X, Y)
[Wed Mar 14 09:46:27 2012] Writing source region out to fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src61_src.reg
[Wed Mar 14 09:46:27 2012] Extracting stamp from image fullrun_mos1_xmm0412990201_pi300-10000_cl_sm2.00.img.gz, (251, 164) - (374, 287)
[Wed Mar 14 09:46:27 2012] XMMSAS bgd. selection expression = annulus(27151.433200, 19593.436000, 1786.860051, 3573.720103, X, Y) && !ellipse(24897.984000, 22866.394000, 1285.792037, 1285.792037, 0.000000, X, Y) && !ellipse(25985.596000, 20519.094000, 1366.088039, 1366.088039, 0.000000, X, Y) && !ellipse(25160.987244, 22131.714310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24271.290000, 23397.112000, 2571.584074, 2571.584074, 0.000000, X, Y) && !ellipse(24667.842000, 22992.686000, 2446.688070, 2446.688070, 0.000000, X, Y) && !ellipse(25933.631200, 22296.598000, 1308.344038, 1308.344038, 0.000000, X, Y) && !ellipse(27939.402000, 21414.802000, 1322.120038, 1322.120038, 0.000000, X, Y) && !ellipse(23530.432000, 24424.430000, 2437.744070, 1872.392054, 239.340000, X, Y) && !ellipse(28644.954000, 20418.646000, 1478.008043, 1478.008043, 0.000000, X, Y) && !ellipse(27231.772000, 22044.294000, 2644.240076, 2644.240076, 0.000000, X, Y) && !ellipse(26852.550000, 21640.130000, 2535.344073, 2535.344073, 0.000000, X, Y) && !ellipse(29072.016000, 19851.626000, 3066.064088, 3066.064088, 0.000000, X, Y) && !ellipse(27229.127600, 22308.802266, 1290.960037, 1290.960037, 0.000000, X, Y) && !ellipse(29598.798000, 19078.266000, 3355.072097, 3355.072097, 0.000000, X, Y) && !ellipse(26678.708191, 23035.644257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31612.874000, 17424.894000, 1758.920051, 1758.920051, 0.000000, X, Y) && !ellipse(27632.180440, 21884.655730, 2581.920074, 585.073727, 52.178202, X, Y) && !ellipse(26265.914000, 23388.826000, 1227.192035, 1227.192035, 0.000000, X, Y) && !ellipse(31208.420000, 17798.584000, 1714.032049, 1714.032049, 0.000000, X, Y) && !ellipse(27909.850586, 20226.775925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25578.934000, 23314.642000, 2454.384071, 2454.384071, 0.000000, X, Y) && !ellipse(25849.308899, 21708.558395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30121.148000, 18890.482000, 2956.016085, 2956.016085, 0.000000, X, Y) && !ellipse(30782.308197, 17707.244720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27824.709800, 17063.808000, 566.833616, 566.833616, 0.000000, X, Y) && !ellipse(30819.732000, 18265.856000, 1677.536048, 1677.536048, 0.000000, X, Y) && !ellipse(23618.789581, 23012.404785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31893.692000, 16938.490000, 3428.064099, 3428.064099, 0.000000, X, Y) && !ellipse(30398.420000, 18398.946000, 1664.744048, 1664.744048, 0.000000, X, Y) && !ellipse(27219.835022, 20044.865265, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31242.738600, 15120.268000, 1737.664050, 1737.664050, 0.000000, X, Y)
[Wed Mar 14 09:46:27 2012] Writing fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src61.gif
[Wed Mar 14 13:40:36 2012] Mean detx,y = (5011.57, -1081.42) 
[Wed Mar 14 13:40:39 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 14 13:40:58 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 14 13:40:59 2012] Setting source spectrum file to fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Wed Mar 14 13:40:59 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src61_bgd.pi.gz
[Fri Mar 16 22:36:11 2012] Updating aperture counts using extracted products
[Fri Mar 16 22:36:11 2012] Error reading totcts from fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src61_src_b10.pi.gz
[Fri Mar 16 22:36:13 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 22:36:13 2012] Using photon index=1.80, rate=0.00645, arf fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src61.arf
[Fri Mar 16 22:36:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 22:36:13 2012] Updating source flux to 6.5e-14
[Fri Mar 16 22:36:20 2012] Flag b found in src. 61 procflags, skipping spectral fitting
[Fri Mar 16 22:36:20 2012] Flag c found in src. 61 procflags, skipping spectral fitting