[Thu Mar  8 18:39:55 2012] Detection parameters:
  Position = (318.5, 252.0) = 8 48 37.42 -45 40 13.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 324.6 +/- 34.8
  Background counts = 319.5
  Rate = 0.006 +/- 0.0006

[Thu Mar  8 18:39:56 2012] Off-axis axis estimate = 3.67'
[Fri Mar  9 12:30:38 2012] Using EEF radius (= 8.26 ")to estimate initial spatial extent for simple fitting
[Fri Mar  9 12:30:38 2012] Initial guess for spatial extent in simple fitting = 8.26"
[Fri Mar  9 12:30:38 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.868
[Fri Mar  9 12:30:38 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 8.26"
[Fri Mar  9 20:35:57 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src29.ximg exists
[Fri Mar  9 20:35:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src29.csv
[Fri Mar  9 20:35:57 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src29_1.ximg exists
[Fri Mar  9 20:35:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src29.csv
[Fri Mar  9 20:35:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 20:36:00 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Fri Mar  9 20:36:00 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Fri Mar  9 20:36:00 2012] Fit fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Sat Mar 10 02:14:11 2012] Spatial fit model total counts = 5016.950000, observed total counts = 4900.000000
[Sat Mar 10 02:14:11 2012] Offset between fit and detection position for source 55 = 0.767403 pixels
[Sat Mar 10 02:14:11 2012] Warning, changing simple spatial fit ID from 29 to 20
[Sat Mar 10 02:14:11 2012] 4868.851000 total counts/ 4170.060000 bgd. counts: snr = 10.821218
Spatial fit parameters:
  Offset between fit and detection position for source 55 = 0.767403 pixels
  Position = (317.9, 252.5) = 8 48 37.64 -45 40 10.0
  Extent = 16.9 (13.3-33.9)", rotation angle = 0
  Source counts = 698.8 +/- 69.8
  Background counts = 4170.1
  Rate = 0.01 +/- 0.001
[Sat Mar 10 02:14:11 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 02:14:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 02:14:11 2012] Assessing source extent using major axis lower bound
[Sat Mar 10 02:14:11 2012] Source does appear to be extended
[Sat Mar 10 02:14:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 02:14:11 2012] Source is confused with source 24
[Sat Mar 10 23:47:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Mar 10 23:47:45 2012] Initial guess for spatial extent in simple fitting = 16.94"
[Sat Mar 10 23:47:45 2012] source mask rpix=3.9, npix_max = 77, mask sum = 72, frac = 0.933
[Sat Mar 10 23:47:45 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 16.94"
[Sun Mar 11 07:03:12 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src27.ximg exists
[Sun Mar 11 07:03:12 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src27_1.ximg exists
[Sun Mar 11 07:03:12 2012] Fit fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src27 appears to have run properly
[Sun Mar 11 07:03:14 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Sun Mar 11 07:03:14 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Sun Mar 11 07:03:14 2012] Fit fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Sun Mar 11 16:12:51 2012] Spatial fit model total counts = 11005.000000, observed total counts = 10938.000000
[Sun Mar 11 16:12:51 2012] Offset between fit and detection position for source 55 = 0.466000 pixels
[Sun Mar 11 16:12:51 2012] Warning, changing simple spatial fit ID from 27 to 22
[Sun Mar 11 16:12:51 2012] 10725.275000 total counts/ 10101.900000 bgd. counts: snr = 6.202230
Spatial fit parameters:
  Offset between fit and detection position for source 55 = 0.466000 pixels
  Position = (318.2, 252.1) = 8 48 37.54 -45 40 11.7
  Extent = 32.3" x 7.3", rotation angle = 52
  Source counts = 623.4 +/- 103.6
  Background counts = 10101.9
  Rate = 0.01 +/- 0.002
[Sun Mar 11 16:12:51 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 16:12:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 16:12:51 2012] Assessing source extent using major
[Sun Mar 11 16:12:51 2012] Source does appear to be extended
[Sun Mar 11 16:12:51 2012] Computing asymmetry using major and minor axis, asym = 4.41
[Sun Mar 11 16:12:51 2012] Source is asymmetric
[Wed Mar 14 09:46:24 2012] XMMSAS src. selection expression = ellipse(27632.180440, 21884.655730, 1936.440056, 438.805295, 52.178202, X, Y)
[Wed Mar 14 09:46:24 2012] Writing source region out to fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src55_src.reg
[Wed Mar 14 09:46:24 2012] Extracting stamp from image fullrun_mos1_xmm0412990201_pi300-10000_cl_sm2.00.img.gz, (207, 141) - (429, 363)
[Wed Mar 14 09:46:24 2012] XMMSAS bgd. selection expression = annulus(27632.180440, 21884.655730, 3227.400093, 6454.800186, X, Y) && !ellipse(24897.984000, 22866.394000, 1285.792037, 1285.792037, 0.000000, X, Y) && !ellipse(25985.596000, 20519.094000, 1366.088039, 1366.088039, 0.000000, X, Y) && !ellipse(25160.987244, 22131.714310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24271.290000, 23397.112000, 2571.584074, 2571.584074, 0.000000, X, Y) && !ellipse(24667.842000, 22992.686000, 2446.688070, 2446.688070, 0.000000, X, Y) && !ellipse(25933.631200, 22296.598000, 1308.344038, 1308.344038, 0.000000, X, Y) && !ellipse(22771.885681, 14991.275864, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22910.092000, 25464.926000, 1191.928034, 1191.928034, 0.000000, X, Y) && !ellipse(23193.536000, 24646.464000, 1191.928034, 746.223672, 0.000000, X, Y) && !ellipse(24129.514800, 24762.571600, 1171.224034, 673.042419, 211.042000, X, Y) && !ellipse(27939.402000, 21414.802000, 1322.120038, 1322.120038, 0.000000, X, Y) && !ellipse(23530.432000, 24424.430000, 2437.744070, 1872.392054, 239.340000, X, Y) && !ellipse(23610.500580, 25084.057770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28644.954000, 20418.646000, 1478.008043, 1478.008043, 0.000000, X, Y) && !ellipse(22693.224000, 25776.794000, 2073.736060, 2073.736060, 0.000000, X, Y) && !ellipse(24637.107400, 24472.067000, 1157.944033, 1157.944033, 0.000000, X, Y) && !ellipse(27231.772000, 22044.294000, 2644.240076, 2644.240076, 0.000000, X, Y) && !ellipse(26852.550000, 21640.130000, 2535.344073, 2535.344073, 0.000000, X, Y) && !ellipse(29072.016000, 19851.626000, 3066.064088, 3066.064088, 0.000000, X, Y) && !ellipse(27229.127600, 22308.802266, 1290.960037, 1290.960037, 0.000000, X, Y) && !ellipse(29598.798000, 19078.266000, 3355.072097, 3355.072097, 0.000000, X, Y) && !ellipse(26678.708191, 23035.644257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31612.874000, 17424.894000, 1758.920051, 1758.920051, 0.000000, X, Y) && !ellipse(21135.972000, 26176.934000, 1294.976037, 1294.976037, 0.000000, X, Y) && !ellipse(26265.914000, 23388.826000, 1227.192035, 1227.192035, 0.000000, X, Y) && !ellipse(22385.092000, 26176.172000, 2383.856069, 2383.856069, 0.000000, X, Y) && !ellipse(31208.420000, 17798.584000, 1714.032049, 1714.032049, 0.000000, X, Y) && !ellipse(27909.850586, 20226.775925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20645.224000, 26443.074000, 1344.368039, 1344.368039, 0.000000, X, Y) && !ellipse(25578.934000, 23314.642000, 2454.384071, 2454.384071, 0.000000, X, Y) && !ellipse(32751.490000, 16499.744000, 1759.584051, 1759.584051, 0.000000, X, Y) && !ellipse(25849.308899, 21708.558395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30121.148000, 18890.482000, 2956.016085, 2956.016085, 0.000000, X, Y) && !ellipse(30782.308197, 17707.244720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19851.052000, 27471.200600, 1410.816041, 1410.816041, 0.000000, X, Y) && !ellipse(27824.709800, 17063.808000, 566.833616, 566.833616, 0.000000, X, Y) && !ellipse(30819.732000, 18265.856000, 1677.536048, 1677.536048, 0.000000, X, Y) && !ellipse(20472.282000, 26620.680000, 2589.952075, 2589.952075, 0.000000, X, Y) && !ellipse(23618.789581, 23012.404785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19847.426000, 27262.456000, 1408.104041, 1408.104041, 0.000000, X, Y) && !ellipse(31893.692000, 16938.490000, 3428.064099, 3428.064099, 0.000000, X, Y) && !ellipse(21342.104000, 26680.566000, 1327.768038, 1327.768038, 0.000000, X, Y) && !ellipse(20365.995041, 27356.837189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27151.433200, 19593.436000, 1429.488041, 1429.488041, 0.000000, X, Y) && !ellipse(30398.420000, 18398.946000, 1664.744048, 1664.744048, 0.000000, X, Y) && !ellipse(27219.835022, 20044.865265, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22143.571671, 24433.187958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31242.738600, 15120.268000, 1737.664050, 1737.664050, 0.000000, X, Y)
[Wed Mar 14 09:46:24 2012] Writing fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src55.gif
[Wed Mar 14 12:14:17 2012] Mean detx,y = (3030.66, -1919.52) 
[Wed Mar 14 12:14:22 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 14 12:16:12 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 14 12:16:12 2012] Setting source spectrum file to fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Wed Mar 14 12:16:12 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src55_bgd.pi.gz
[Fri Mar 16 22:36:11 2012] Updating aperture counts using extracted products
[Fri Mar 16 22:36:11 2012] Error reading totcts from fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Fri Mar 16 22:36:12 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 22:36:12 2012] Using photon index=1.80, rate=0.00996, arf fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src55.arf
[Fri Mar 16 22:36:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 22:36:12 2012] Updating source flux to 1.1e-13
[Fri Mar 16 22:36:20 2012] Flag c found in src. 55 procflags, skipping spectral fitting