[Thu Mar  8 18:39:54 2012] Detection parameters:
  Position = (206.4, 274.9) = 8 49 23.89 -45 38 30.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 150.8 +/- 28.1
  Background counts = 351.4
  Rate = 0.003 +/- 0.0006

[Thu Mar  8 18:39:56 2012] Off-axis axis estimate = 6.88'
[Fri Mar  9 12:30:38 2012] Using EEF radius (= 9.87 ")to estimate initial spatial extent for simple fitting
[Fri Mar  9 12:30:38 2012] Initial guess for spatial extent in simple fitting = 9.87"
[Fri Mar  9 12:30:38 2012] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.978
[Fri Mar  9 12:30:38 2012] Giving source the simple spatial ID 63 for pass 0, mean size = 9.87"
[Fri Mar  9 20:35:58 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src63.ximg exists
[Fri Mar  9 20:35:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src63.csv
[Fri Mar  9 20:35:58 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src63_1.ximg exists
[Fri Mar  9 20:35:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src63.csv
[Fri Mar  9 20:35:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 20:36:00 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Fri Mar  9 20:36:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src63.csv
[Fri Mar  9 20:36:00 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Fri Mar  9 20:36:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src63.csv
[Fri Mar  9 20:36:00 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 02:14:11 2012] Warning: source 63 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 49 at 12.179113 pixels away
[Sat Mar 10 02:14:11 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 02:14:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 02:14:11 2012] Assessing source extent using major
[Sat Mar 10 02:14:11 2012] Source does appear to be extended
[Sat Mar 10 02:14:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 23:47:45 2012] Using EEF radius (= 9.87 ")to estimate initial spatial extent for simple fitting
[Sat Mar 10 23:47:45 2012] Initial guess for spatial extent in simple fitting = 9.87"
[Sat Mar 10 23:47:45 2012] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.978
[Sat Mar 10 23:47:45 2012] Giving source the simple spatial ID 57 for pass 1, mean size = 9.87"
[Sun Mar 11 07:03:13 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src57.ximg exists
[Sun Mar 11 07:03:13 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src57_1.ximg exists
[Sun Mar 11 07:03:13 2012] Fit fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src57 appears to have run properly
[Sun Mar 11 07:03:15 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src57.ximg exists
[Sun Mar 11 07:03:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src57.csv
[Sun Mar 11 07:03:15 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src57_1.ximg exists
[Sun Mar 11 07:03:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src57.csv
[Sun Mar 11 07:03:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 16:12:51 2012] Warning: source 57 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 49 at 10.165601 pixels away
[Sun Mar 11 16:12:51 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 16:12:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 16:12:51 2012] Assessing source extent using major
[Sun Mar 11 16:12:51 2012] Source does appear to be extended
[Sun Mar 11 16:12:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 14 09:46:27 2012] XMMSAS src. selection expression = ellipse(17911.423111, 23870.717346, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Mar 14 09:46:27 2012] Writing source region out to fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src49_src.reg
[Wed Mar 14 09:46:27 2012] Extracting stamp from image fullrun_mos1_xmm0412990201_pi300-10000_cl_sm2.00.img.gz, (169, 237) - (244, 312)
[Wed Mar 14 09:46:27 2012] XMMSAS bgd. selection expression = annulus(17911.423111, 23870.717346, 1087.500000, 2175.000000, X, Y) && !ellipse(17075.824000, 26043.196000, 1348.824039, 1348.824039, 0.000000, X, Y) && !ellipse(17277.680000, 25224.636000, 1355.256039, 1355.256039, 0.000000, X, Y) && !ellipse(21135.972000, 26176.934000, 1294.976037, 1294.976037, 0.000000, X, Y) && !ellipse(22385.092000, 26176.172000, 2383.856069, 2383.856069, 0.000000, X, Y) && !ellipse(20645.224000, 26443.074000, 1344.368039, 1344.368039, 0.000000, X, Y) && !ellipse(15898.037600, 26333.592000, 1627.544047, 1627.544047, 0.000000, X, Y) && !ellipse(20472.282000, 26620.680000, 2589.952075, 2589.952075, 0.000000, X, Y) && !ellipse(19847.426000, 27262.456000, 1408.104041, 1408.104041, 0.000000, X, Y) && !ellipse(21342.104000, 26680.566000, 1327.768038, 1327.768038, 0.000000, X, Y) && !ellipse(15786.444000, 26572.636000, 1315.112038, 1315.112038, 0.000000, X, Y) && !ellipse(19885.205078, 26588.848724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20260.431076, 26044.676575, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 14 09:46:27 2012] Writing fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src49.gif
[Wed Mar 14 13:43:53 2012] Mean detx,y = (-1327.87, 6950.59) 
[Wed Mar 14 13:43:57 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 14 13:44:30 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 14 13:44:30 2012] Setting source spectrum file to fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Wed Mar 14 13:44:30 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src49_bgd.pi.gz
[Fri Mar 16 06:43:51 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Mar 16 06:43:51 2012] rmf not generated due to insufficient counts
[Fri Mar 16 22:36:11 2012] Updating aperture counts using extracted products
[Fri Mar 16 22:36:11 2012] Error reading totcts from fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src49_src_b10.pi.gz
[Fri Mar 16 22:36:13 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 22:36:13 2012] Using photon index=1.80, rate=0.00319, arf fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src49.arf
[Fri Mar 16 22:36:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 22:36:13 2012] Updating source flux to 3.8e-14
[Fri Mar 16 22:36:20 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting