[Thu Mar  8 18:39:54 2012] Detection parameters:
  Position = (244.3, 303.1) = 8 49 8.15 -45 36 30.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 338.4 +/- 37.4
  Background counts = 403.1
  Rate = 0.006 +/- 0.0007

[Thu Mar  8 18:39:56 2012] Off-axis axis estimate = 3.94'
[Fri Mar  9 12:30:38 2012] Using EEF radius (= 8.40 ")to estimate initial spatial extent for simple fitting
[Fri Mar  9 12:30:38 2012] Initial guess for spatial extent in simple fitting = 8.40"
[Fri Mar  9 12:30:38 2012] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.847
[Fri Mar  9 12:30:38 2012] Giving source the simple spatial ID 28 for pass 0, mean size = 8.40"
[Fri Mar  9 20:35:57 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src28.ximg exists
[Fri Mar  9 20:35:57 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src28_1.ximg exists
[Fri Mar  9 20:35:57 2012] Fit fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src28 appears to have run properly
[Fri Mar  9 20:36:00 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Fri Mar  9 20:36:00 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Fri Mar  9 20:36:00 2012] Fit fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly
[Sat Mar 10 02:14:11 2012] Warning, spatial fit 28 centroid is now closest to src. 42
[Sat Mar 10 02:14:11 2012] Spatial fit model total counts = 5930.530000, observed total counts = 5925.000000
[Sat Mar 10 02:14:11 2012] Offset between fit and detection position for source 44 = 2.093668 pixels
[Sat Mar 10 02:14:11 2012] Warning, changing simple spatial fit ID from 28 to 35
[Sat Mar 10 02:14:11 2012] 5890.857000 total counts/ 5360.710000 bgd. counts: snr = 7.240777
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 2.093668 pixels
  Position = (242.9, 301.6) = 8 49 8.77 -45 36 36.4
  Extent = 17.2 (17.2-34.5)", rotation angle = 0
  Source counts = 530.1 +/- 76.8
  Background counts = 5360.7
  Rate = 0.008 +/- 0.001
[Sat Mar 10 02:14:11 2012] Spatial fit model total counts = 6589.000000, observed total counts = 6587.000000
[Sat Mar 10 02:14:11 2012] Offset between fit and detection position for source 44 = 0.657945 pixels
[Sat Mar 10 02:14:11 2012] Warning, changing simple spatial fit ID from 35 to 37
[Sat Mar 10 02:14:11 2012] 6629.635000 total counts/ 6317.290000 bgd. counts: snr = 3.929788
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 0.657945 pixels
  Position = (243.5, 301.4) = 8 49 8.50 -45 36 37.0
  Extent = 16.2 (16.0-16.3)", rotation angle = 0
  Source counts = 312.3 +/- 81.4
  Background counts = 6317.3
  Rate = 0.005 +/- 0.001
[Sat Mar 10 02:14:11 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 02:14:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 02:14:11 2012] Assessing source extent using major axis lower bound
[Sat Mar 10 02:14:11 2012] Source does appear to be extended
[Sat Mar 10 02:14:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 02:14:11 2012] Source is confused with source 41
[Sat Mar 10 02:14:11 2012] Source is confused with source 35
[Sat Mar 10 02:14:11 2012] Source is confused with source 43
[Sat Mar 10 23:47:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Mar 10 23:47:45 2012] Initial guess for spatial extent in simple fitting = 16.19"
[Sat Mar 10 23:47:45 2012] source mask rpix=3.7, npix_max = 71, mask sum = 81, frac = 1.136
[Sat Mar 10 23:47:45 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 16.19"
[Sun Mar 11 07:03:12 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src26.ximg exists
[Sun Mar 11 07:03:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src26.csv
[Sun Mar 11 07:03:12 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src26_1.ximg exists
[Sun Mar 11 07:03:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src26.csv
[Sun Mar 11 07:03:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 07:03:14 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Sun Mar 11 07:03:14 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Sun Mar 11 07:03:14 2012] Fit fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Sun Mar 11 16:12:51 2012] Warning, spatial fit 26 centroid is now closest to src. 36
[Sun Mar 11 16:12:51 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 16:12:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 16:12:51 2012] Assessing source extent using major axis lower bound
[Sun Mar 11 16:12:51 2012] Source does appear to be extended
[Sun Mar 11 16:12:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 14 09:46:24 2012] XMMSAS src. selection expression = ellipse(21135.972000, 26176.934000, 971.232028, 971.232028, 0.000000, X, Y)
[Wed Mar 14 09:46:24 2012] Writing source region out to fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src44_src.reg
[Wed Mar 14 09:46:24 2012] Extracting stamp from image fullrun_mos1_xmm0412990201_pi300-10000_cl_sm2.00.img.gz, (188, 246) - (299, 357)
[Wed Mar 14 09:46:24 2012] XMMSAS bgd. selection expression = annulus(21135.972000, 26176.934000, 1618.720047, 3237.440093, X, Y) && !ellipse(17075.824000, 26043.196000, 1348.824039, 1348.824039, 0.000000, X, Y) && !ellipse(24897.984000, 22866.394000, 1285.792037, 1285.792037, 0.000000, X, Y) && !ellipse(25160.987244, 22131.714310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24271.290000, 23397.112000, 2571.584074, 2571.584074, 0.000000, X, Y) && !ellipse(24667.842000, 22992.686000, 2446.688070, 2446.688070, 0.000000, X, Y) && !ellipse(22910.092000, 25464.926000, 1191.928034, 1191.928034, 0.000000, X, Y) && !ellipse(23193.536000, 24646.464000, 1191.928034, 746.223672, 0.000000, X, Y) && !ellipse(24129.514800, 24762.571600, 1171.224034, 673.042419, 211.042000, X, Y) && !ellipse(23530.432000, 24424.430000, 2437.744070, 1872.392054, 239.340000, X, Y) && !ellipse(23610.500580, 25084.057770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22693.224000, 25776.794000, 2073.736060, 2073.736060, 0.000000, X, Y) && !ellipse(24637.107400, 24472.067000, 1157.944033, 1157.944033, 0.000000, X, Y) && !ellipse(26852.550000, 21640.130000, 2535.344073, 2535.344073, 0.000000, X, Y) && !ellipse(17277.680000, 25224.636000, 1355.256039, 1355.256039, 0.000000, X, Y) && !ellipse(22385.092000, 26176.172000, 2383.856069, 2383.856069, 0.000000, X, Y) && !ellipse(20645.224000, 26443.074000, 1344.368039, 1344.368039, 0.000000, X, Y) && !ellipse(25578.934000, 23314.642000, 2454.384071, 2454.384071, 0.000000, X, Y) && !ellipse(19851.052000, 27471.200600, 1410.816041, 1410.816041, 0.000000, X, Y) && !ellipse(20472.282000, 26620.680000, 2589.952075, 2589.952075, 0.000000, X, Y) && !ellipse(23618.789581, 23012.404785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19847.426000, 27262.456000, 1408.104041, 1408.104041, 0.000000, X, Y) && !ellipse(21342.104000, 26680.566000, 1327.768038, 1327.768038, 0.000000, X, Y) && !ellipse(20365.995041, 27356.837189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17911.423111, 23870.717346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19885.205078, 26588.848724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20260.431076, 26044.676575, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22143.571671, 24433.187958, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 14 09:46:24 2012] Writing fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src44.gif
[Wed Mar 14 12:13:31 2012] Mean detx,y = (-2794.45, 3193.19) 
[Wed Mar 14 12:13:34 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 14 12:13:53 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 14 12:13:53 2012] Setting source spectrum file to fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Wed Mar 14 12:13:53 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Fri Mar 16 22:36:10 2012] Updating aperture counts using extracted products
[Fri Mar 16 22:36:11 2012] Error reading totcts from fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Fri Mar 16 22:36:12 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 22:36:12 2012] Using photon index=1.80, rate=0.00499, arf fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src44.arf
[Fri Mar 16 22:36:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 22:36:12 2012] Updating source flux to 4.7e-14
[Fri Mar 16 22:36:20 2012] Flag c found in src. 44 procflags, skipping spectral fitting