[Thu Mar  8 18:39:51 2012] Detection parameters:
  Position = (190.5, 300.1) = 8 49 30.49 -45 36 41.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2140.4 +/- 298.5
  Background counts = 334.7
  Rate = 0.07 +/- 0.009

[Thu Mar  8 18:39:56 2012] Off-axis axis estimate = 7.83'
[Fri Mar  9 12:30:37 2012] Using EEF radius (= 10.34 ")to estimate initial spatial extent for simple fitting
[Fri Mar  9 12:30:37 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Mar  9 12:30:37 2012] Initial guess for spatial extent in simple fitting = 10.34"
[Fri Mar  9 12:30:37 2012] source mask rpix=2.4, npix_max = 33, mask sum = 27, frac = 0.815
[Fri Mar  9 12:30:37 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.34"
[Fri Mar  9 20:35:57 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src1.ximg exists
[Fri Mar  9 20:35:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src1.csv
[Fri Mar  9 20:35:57 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Mar  9 20:35:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src1.csv
[Fri Mar  9 20:35:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 20:35:59 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Mar  9 20:35:59 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Mar  9 20:35:59 2012] Fit fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Mar 10 02:14:10 2012] Warning, spatial fit 1 centroid is now closest to src. 8
[Sat Mar 10 02:14:11 2012] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 15.842477 pixels away
[Sat Mar 10 02:14:11 2012] Spatial fit model total counts = 4047.840000, observed total counts = 4095.000000
[Sat Mar 10 02:14:11 2012] Offset between fit and detection position for source 4 = 6.173107 pixels
[Sat Mar 10 02:14:11 2012] Warning, changing simple spatial fit ID from 1 to 43
[Sat Mar 10 02:14:11 2012] 3825.102000 total counts/ 3592.060000 bgd. counts: snr = 3.888324
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 6.173107 pixels
  Position = (196.6, 299.7) = 8 49 27.94 -45 36 44.1
  Extent = 15.2 (8.2-20.9)", rotation angle = 0
  Source counts = 233.0 +/- 61.8
  Background counts = 3592.1
  Rate = 0.004 +/- 0.001
[Sat Mar 10 02:14:11 2012] Source 4 is offset by 4.835287 and 3.515862 pixels which is larger than
2 X fitted extent = 1.222818 x 1.222818, not incorporating fit results
[Sat Mar 10 02:14:11 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 02:14:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 02:14:11 2012] Assessing source extent using major axis lower bound
[Sat Mar 10 02:14:11 2012] Source does appear to be extended
[Sat Mar 10 02:14:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 02:14:11 2012] Source is confused with source 10
[Sat Mar 10 02:14:11 2012] Source is confused with source 40
[Sat Mar 10 23:47:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Mar 10 23:47:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Mar 10 23:47:45 2012] Initial guess for spatial extent in simple fitting = 15.21"
[Sat Mar 10 23:47:45 2012] source mask rpix=3.5, npix_max = 63, mask sum = 64, frac = 1.001
[Sat Mar 10 23:47:45 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 15.21"
[Sun Mar 11 07:03:11 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src1.ximg exists
[Sun Mar 11 07:03:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src1.csv
[Sun Mar 11 07:03:11 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Mar 11 07:03:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src1.csv
[Sun Mar 11 07:03:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 07:03:13 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Mar 11 07:03:13 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Mar 11 07:03:13 2012] Fit fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Mar 11 16:12:51 2012] Warning, spatial fit 1 centroid is now closest to src. 37
[Sun Mar 11 16:12:51 2012] Spatial fit model total counts = 4037.040000, observed total counts = 4095.000000
[Sun Mar 11 16:12:51 2012] Offset between fit and detection position for source 4 = 0.273667 pixels
[Sun Mar 11 16:12:51 2012] Warning, changing simple spatial fit ID from 1 to 40
[Sun Mar 11 16:12:51 2012] 3787.642000 total counts/ 3486.200000 bgd. counts: snr = 5.105375
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.273667 pixels
  Position = (196.8, 299.9) = 8 49 27.85 -45 36 43.3
  Extent = 16.9 (9.5-20.9)", rotation angle = 0
  Source counts = 301.4 +/- 61.5
  Background counts = 3486.2
  Rate = 0.005 +/- 0.001
[Sun Mar 11 16:12:51 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 16:12:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 16:12:51 2012] Assessing source extent using major axis lower bound
[Sun Mar 11 16:12:51 2012] Source does appear to be extended
[Sun Mar 11 16:12:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 14 09:46:22 2012] XMMSAS src. selection expression = ellipse(17075.824000, 26043.196000, 1011.618029, 1011.618029, 0.000000, X, Y)
[Wed Mar 14 09:46:22 2012] Writing source region out to fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src4_src.reg
[Wed Mar 14 09:46:22 2012] Extracting stamp from image fullrun_mos1_xmm0412990201_pi300-10000_cl_sm2.00.img.gz, (139, 242) - (255, 358)
[Wed Mar 14 09:46:22 2012] XMMSAS bgd. selection expression = annulus(17075.824000, 26043.196000, 1686.030049, 3372.060097, X, Y) && !ellipse(17277.680000, 25224.636000, 1355.256039, 1355.256039, 0.000000, X, Y) && !ellipse(21135.972000, 26176.934000, 1294.976037, 1294.976037, 0.000000, X, Y) && !ellipse(22385.092000, 26176.172000, 2383.856069, 2383.856069, 0.000000, X, Y) && !ellipse(20645.224000, 26443.074000, 1344.368039, 1344.368039, 0.000000, X, Y) && !ellipse(15898.037600, 26333.592000, 1627.544047, 1627.544047, 0.000000, X, Y) && !ellipse(19851.052000, 27471.200600, 1410.816041, 1410.816041, 0.000000, X, Y) && !ellipse(14792.951813, 30218.438385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20472.282000, 26620.680000, 2589.952075, 2589.952075, 0.000000, X, Y) && !ellipse(19847.426000, 27262.456000, 1408.104041, 1408.104041, 0.000000, X, Y) && !ellipse(21342.104000, 26680.566000, 1327.768038, 1327.768038, 0.000000, X, Y) && !ellipse(20365.995041, 27356.837189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15786.444000, 26572.636000, 1315.112038, 1315.112038, 0.000000, X, Y) && !ellipse(17911.423111, 23870.717346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19885.205078, 26588.848724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20260.431076, 26044.676575, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 14 09:46:22 2012] Writing fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src4.gif
[Wed Mar 14 09:46:49 2012] Mean detx,y = (-3576.77, 7270.92) 
[Wed Mar 14 09:46:52 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 14 09:47:33 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 14 09:47:33 2012] Setting source spectrum file to fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Mar 14 09:47:33 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Mar 16 22:36:10 2012] Updating aperture counts using extracted products
[Fri Mar 16 22:36:10 2012] Error reading totcts from fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Mar 16 22:36:12 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 22:36:12 2012] Using photon index=1.80, rate=0.00482, arf fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src4.arf
[Fri Mar 16 22:36:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 22:36:12 2012] Updating source flux to 5.6e-14
[Fri Mar 16 22:36:20 2012] Flag b found in src. 4 procflags, skipping spectral fitting
[Fri Mar 16 22:36:20 2012] Flag c found in src. 4 procflags, skipping spectral fitting
[Fri Mar 16 22:46:31 2012] Reading fit data from xmm0412990201/analysis//spectral/fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src4_pl.csv
[Fri Mar 16 22:46:31 2012] Spectral fit parameter nH value = 3.92684e+21
[Fri Mar 16 22:46:31 2012] Spectral fit parameter PhoIndex value = 2.74817
[Fri Mar 16 22:46:31 2012] Failed to get F(0.3-8.0) from xmm0412990201/analysis//spectral/fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Fri Mar 16 22:46:31 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 22:46:31 2012] Using Nh = 3.9e+21, photon index=2.75, rate=0.00482, arf fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src4.arf
[Fri Mar 16 22:46:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 22:46:31 2012] Updating source flux to 5.1e-14