[Thu Mar 8 18:39:53 2012] Detection parameters: Position = (222.5, 315.9) = 8 49 17.19 -45 35 32.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 211.2 +/- 32.1 Background counts = 399.6 Rate = 0.004 +/- 0.0006 [Thu Mar 8 18:39:56 2012] Off-axis axis estimate = 5.65' [Fri Mar 9 12:30:38 2012] Using EEF radius (= 9.25 ")to estimate initial spatial extent for simple fitting [Fri Mar 9 12:30:38 2012] Initial guess for spatial extent in simple fitting = 9.25" [Fri Mar 9 12:30:38 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.087 [Fri Mar 9 12:30:38 2012] Giving source the simple spatial ID 51 for pass 0, mean size = 9.25" [Fri Mar 9 20:35:58 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src51.ximg exists [Fri Mar 9 20:35:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src51.csv [Fri Mar 9 20:35:58 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src51_1.ximg exists [Fri Mar 9 20:35:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src51.csv [Fri Mar 9 20:35:58 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src51_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Mar 9 20:36:00 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src51.ximg exists [Fri Mar 9 20:36:00 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists [Fri Mar 9 20:36:00 2012] Fit fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src51 appears to have run properly [Sat Mar 10 02:14:11 2012] Spatial fit model total counts = 5575.650000, observed total counts = 5575.000000 [Sat Mar 10 02:14:11 2012] Offset between fit and detection position for source 33 = 3.927277 pixels [Sat Mar 10 02:14:11 2012] Warning, changing simple spatial fit ID from 51 to 44 [Sat Mar 10 02:14:11 2012] 5474.770000 total counts/ 5060.260000 bgd. counts: snr = 5.827048 Spatial fit parameters: Offset between fit and detection position for source 33 = 3.927277 pixels Position = (226.4, 316.3) = 8 49 15.57 -45 35 32.1 Extent = 18.0" x 11.8", rotation angle = 13 (329-17) degrees Source counts = 414.5 +/- 74.0 Background counts = 5060.3 Rate = 0.007 +/- 0.001 [Sat Mar 10 02:14:11 2012] Spatial fit model total counts = 5186.690000, observed total counts = 5160.000000 [Sat Mar 10 02:14:11 2012] Offset between fit and detection position for source 33 = 1.642920 pixels [Sat Mar 10 02:14:11 2012] Warning, changing simple spatial fit ID from 44 to 51 [Sat Mar 10 02:14:11 2012] 5156.273000 total counts/ 4533.610000 bgd. counts: snr = 9.247641 Spatial fit parameters: Offset between fit and detection position for source 33 = 1.642920 pixels Position = (226.9, 314.8) = 8 49 15.39 -45 35 39.0 Extent = 18.5 (18.5-37.0)", rotation angle = 0 Source counts = 622.7 +/- 71.8 Background counts = 4533.6 Rate = 0.01 +/- 0.001 [Sat Mar 10 02:14:11 2012] Vigneting correction estimate = 1.000000 [Sat Mar 10 02:14:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Mar 10 02:14:11 2012] Assessing source extent using major axis lower bound [Sat Mar 10 02:14:11 2012] Source does appear to be extended [Sat Mar 10 02:14:11 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Mar 10 02:14:11 2012] Source is confused with source 34 [Sat Mar 10 23:47:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Sat Mar 10 23:47:45 2012] Initial guess for spatial extent in simple fitting = 18.50" [Sat Mar 10 23:47:45 2012] source mask rpix=4.3, npix_max = 90, mask sum = 100, frac = 1.106 [Sat Mar 10 23:47:45 2012] Giving source the simple spatial ID 47 for pass 1, mean size = 18.50" [Sun Mar 11 07:03:12 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src47.ximg exists [Sun Mar 11 07:03:12 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src47_1.ximg exists [Sun Mar 11 07:03:12 2012] Fit fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src47 appears to have run properly [Sun Mar 11 07:03:14 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src47.ximg exists [Sun Mar 11 07:03:14 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src47_1.ximg exists [Sun Mar 11 07:03:14 2012] Fit fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src47 appears to have run properly [Sun Mar 11 16:12:51 2012] Spatial fit model total counts = 5713.170000, observed total counts = 5706.000000 [Sun Mar 11 16:12:51 2012] Offset between fit and detection position for source 33 = 2.003592 pixels [Sun Mar 11 16:12:51 2012] Warning, changing simple spatial fit ID from 47 to 45 [Sun Mar 11 16:12:51 2012] 5712.767000 total counts/ 5246.210000 bgd. counts: snr = 6.441424 Spatial fit parameters: Offset between fit and detection position for source 33 = 2.003592 pixels Position = (228.7, 313.9) = 8 49 14.64 -45 35 42.6 Extent = 17.6 (17.6-17.6)", rotation angle = 0 Source counts = 466.6 +/- 75.6 Background counts = 5246.2 Rate = 0.007 +/- 0.001 [Sun Mar 11 16:12:51 2012] Vigneting correction estimate = 1.000000 [Sun Mar 11 16:12:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Mar 11 16:12:51 2012] Assessing source extent using major axis lower bound [Sun Mar 11 16:12:51 2012] Source does appear to be extended [Sun Mar 11 16:12:51 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Mar 14 09:46:26 2012] XMMSAS src. selection expression = ellipse(19847.426000, 27262.456000, 1056.078030, 1056.078030, 0.000000, X, Y) [Wed Mar 14 09:46:26 2012] Writing source region out to fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src33_src.reg [Wed Mar 14 09:46:26 2012] Extracting stamp from image fullrun_mos1_xmm0412990201_pi300-10000_cl_sm2.00.img.gz, (168, 253) - (289, 375) [Wed Mar 14 09:46:26 2012] XMMSAS bgd. selection expression = annulus(19847.426000, 27262.456000, 1760.130051, 3520.260101, X, Y) && !ellipse(17075.824000, 26043.196000, 1348.824039, 1348.824039, 0.000000, X, Y) && !ellipse(24271.290000, 23397.112000, 2571.584074, 2571.584074, 0.000000, X, Y) && !ellipse(24667.842000, 22992.686000, 2446.688070, 2446.688070, 0.000000, X, Y) && !ellipse(22910.092000, 25464.926000, 1191.928034, 1191.928034, 0.000000, X, Y) && !ellipse(23193.536000, 24646.464000, 1191.928034, 746.223672, 0.000000, X, Y) && !ellipse(24129.514800, 24762.571600, 1171.224034, 673.042419, 211.042000, X, Y) && !ellipse(23530.432000, 24424.430000, 2437.744070, 1872.392054, 239.340000, X, Y) && !ellipse(23610.500580, 25084.057770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22693.224000, 25776.794000, 2073.736060, 2073.736060, 0.000000, X, Y) && !ellipse(17277.680000, 25224.636000, 1355.256039, 1355.256039, 0.000000, X, Y) && !ellipse(21135.972000, 26176.934000, 1294.976037, 1294.976037, 0.000000, X, Y) && !ellipse(22385.092000, 26176.172000, 2383.856069, 2383.856069, 0.000000, X, Y) && !ellipse(20645.224000, 26443.074000, 1344.368039, 1344.368039, 0.000000, X, Y) && !ellipse(25578.934000, 23314.642000, 2454.384071, 2454.384071, 0.000000, X, Y) && !ellipse(15898.037600, 26333.592000, 1627.544047, 1627.544047, 0.000000, X, Y) && !ellipse(19851.052000, 27471.200600, 1410.816041, 1410.816041, 0.000000, X, Y) && !ellipse(20472.282000, 26620.680000, 2589.952075, 2589.952075, 0.000000, X, Y) && !ellipse(23618.789581, 23012.404785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21342.104000, 26680.566000, 1327.768038, 1327.768038, 0.000000, X, Y) && !ellipse(20365.995041, 27356.837189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15786.444000, 26572.636000, 1315.112038, 1315.112038, 0.000000, X, Y) && !ellipse(17911.423111, 23870.717346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19885.205078, 26588.848724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20260.431076, 26044.676575, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22143.571671, 24433.187958, 870.000000, 870.000000, 0.000000, X, Y) [Wed Mar 14 09:46:26 2012] Writing fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src33.gif [Wed Mar 14 13:24:09 2012] Mean detx,y = (-4107.45, 4224.90) [Wed Mar 14 13:24:11 2012] Setting backscal keywords in source and bgd. spectrum [Wed Mar 14 13:24:57 2012] Binned source spectrum to 10 counts/bin [Wed Mar 14 13:24:57 2012] Setting source spectrum file to fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src33_src_b10.pi.gz [Wed Mar 14 13:24:57 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src33_bgd.pi.gz [Fri Mar 16 22:36:11 2012] Updating aperture counts using extracted products [Fri Mar 16 22:36:11 2012] Error reading totcts from fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src33_src_b10.pi.gz [Fri Mar 16 22:36:13 2012] Calculating source flux in energy range 0.30-8.00 [Fri Mar 16 22:36:13 2012] Using photon index=1.80, rate=0.00746, arf fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src33.arf [Fri Mar 16 22:36:13 2012] Assuming count rate is from the 0.30-10.00 bandpass [Fri Mar 16 22:36:13 2012] Updating source flux to 7.5e-14 [Fri Mar 16 22:36:20 2012] Flag c found in src. 33 procflags, skipping spectral fitting