[Thu Mar  8 18:39:53 2012] Detection parameters:
  Position = (122.3, 377.9) = 8 49 58.64 -45 31 2.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 103.3 +/- 19.9
  Background counts = 128.9
  Rate = 0.002 +/- 0.0003

[Thu Mar  8 18:39:56 2012] Off-axis axis estimate = 14.01'
[Fri Mar  9 12:30:38 2012] Using EEF radius (= 13.43 ")to estimate initial spatial extent for simple fitting
[Fri Mar  9 12:30:38 2012] Initial guess for spatial extent in simple fitting = 13.43"
[Fri Mar  9 12:30:38 2012] source mask rpix=3.1, npix_max = 51, mask sum = 48, frac = 0.932
[Fri Mar  9 12:30:38 2012] Giving source the simple spatial ID 76 for pass 0, mean size = 13.43"
[Fri Mar  9 20:35:59 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src76.ximg exists
[Fri Mar  9 20:35:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src76.csv
[Fri Mar  9 20:35:59 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src76_1.ximg exists
[Fri Mar  9 20:35:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src76.csv
[Fri Mar  9 20:35:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src76_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src76.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 20:36:01 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src76.ximg exists
[Fri Mar  9 20:36:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src76.csv
[Fri Mar  9 20:36:01 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src76_1.ximg exists
[Fri Mar  9 20:36:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src76.csv
[Fri Mar  9 20:36:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src76_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src76.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Mar 10 02:14:11 2012] Warning: source 59 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 17.324822 pixels away
[Sat Mar 10 02:14:11 2012] Warning: source 76 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 17.329790 pixels away
[Sat Mar 10 02:14:11 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 02:14:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 02:14:11 2012] Assessing source extent using major
[Sat Mar 10 02:14:11 2012] Source does appear to be extended
[Sat Mar 10 02:14:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 02:14:11 2012] Deleting source due to low Poisson probability 0.9