[Thu Mar  8 18:39:53 2012] Detection parameters:
  Position = (328.7, 239.4) = 8 48 33.15 -45 41 8.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 361.5 +/- 31.1
  Background counts = 229.9
  Rate = 0.009 +/- 0.0008

[Thu Mar  8 18:39:56 2012] Off-axis axis estimate = 4.81'
[Fri Mar  9 12:30:38 2012] Using EEF radius (= 8.83 ")to estimate initial spatial extent for simple fitting
[Fri Mar  9 12:30:38 2012] Initial guess for spatial extent in simple fitting = 8.83"
[Fri Mar  9 12:30:38 2012] source mask rpix=2.0, npix_max = 25, mask sum = 18, frac = 0.703
[Fri Mar  9 12:30:38 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 8.83"
[Fri Mar  9 20:35:57 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src13.ximg exists
[Fri Mar  9 20:35:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src13.csv
[Fri Mar  9 20:35:57 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri Mar  9 20:35:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src13.csv
[Fri Mar  9 20:35:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 20:35:59 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri Mar  9 20:35:59 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Mar  9 20:35:59 2012] Fit fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Sat Mar 10 02:14:11 2012] Spatial fit model total counts = 4472.160000, observed total counts = 4354.000000
[Sat Mar 10 02:14:11 2012] Offset between fit and detection position for source 24 = 5.142471 pixels
[Sat Mar 10 02:14:11 2012] 3825.438000 total counts/ 2982.880000 bgd. counts: snr = 15.427015
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 5.142471 pixels
  Position = (324.9, 242.9) = 8 48 34.74 -45 40 51.9
  Extent = 17.7 (17.0-35.3)", rotation angle = 0
  Source counts = 842.6 +/- 61.9
  Background counts = 2982.9
  Rate = 0.01 +/- 0.001
[Sat Mar 10 02:14:11 2012] Spatial fit model total counts = 5243.730000, observed total counts = 5249.000000
[Sat Mar 10 02:14:11 2012] Offset between fit and detection position for source 24 = 5.016995 pixels
[Sat Mar 10 02:14:11 2012] Warning, changing simple spatial fit ID from 13 to 29
[Sat Mar 10 02:14:11 2012] 5129.965000 total counts/ 4452.750000 bgd. counts: snr = 10.148747
Spatial fit parameters:
  Offset between fit and detection position for source 24 = 5.016995 pixels
  Position = (321.7, 246.7) = 8 48 36.07 -45 40 35.2
  Extent = 16.5 (16.2-33.1)", rotation angle = 0
  Source counts = 677.2 +/- 71.6
  Background counts = 4452.8
  Rate = 0.01 +/- 0.001
[Sat Mar 10 02:14:11 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 02:14:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 02:14:11 2012] Assessing source extent using major axis lower bound
[Sat Mar 10 02:14:11 2012] Source does appear to be extended
[Sat Mar 10 02:14:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 02:14:11 2012] Source is confused with source 23
[Sat Mar 10 02:14:11 2012] Source is confused with source 55
[Sat Mar 10 23:47:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Mar 10 23:47:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Mar 10 23:47:45 2012] Initial guess for spatial extent in simple fitting = 16.53"
[Sat Mar 10 23:47:45 2012] source mask rpix=3.8, npix_max = 73, mask sum = 71, frac = 0.960
[Sat Mar 10 23:47:45 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 16.53"
[Sun Mar 11 07:03:11 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src12.ximg exists
[Sun Mar 11 07:03:11 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src12_1.ximg exists
[Sun Mar 11 07:03:11 2012] Fit fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src12 appears to have run properly
[Sun Mar 11 07:03:13 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Sun Mar 11 07:03:13 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Sun Mar 11 07:03:13 2012] Fit fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Sun Mar 11 16:12:51 2012] Warning, spatial fit 12 centroid is now closest to src. 23
[Sun Mar 11 16:12:51 2012] Source 24 is offset by -2.272713 and 4.747011 pixels which is larger than
2 X fitted extent = 3.421287 x 3.421287, not incorporating fit results
[Sun Mar 11 16:12:51 2012] Source 24 is offset by -4.585356 and 3.419241 pixels which is larger than
2 X fitted extent = 2.098175 x 2.098175, not incorporating fit results
[Sun Mar 11 16:12:51 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 16:12:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 16:12:51 2012] Assessing source extent using major axis lower bound
[Sun Mar 11 16:12:51 2012] Source does appear to be extended
[Sun Mar 11 16:12:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 14 09:46:23 2012] XMMSAS src. selection expression = ellipse(27939.402000, 21414.802000, 991.590029, 991.590029, 0.000000, X, Y)
[Wed Mar 14 09:46:23 2012] Writing source region out to fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src24_src.reg
[Wed Mar 14 09:46:23 2012] Extracting stamp from image fullrun_mos1_xmm0412990201_pi300-10000_cl_sm2.00.img.gz, (265, 190) - (379, 304)
[Wed Mar 14 09:46:23 2012] XMMSAS bgd. selection expression = annulus(27939.402000, 21414.802000, 1652.650048, 3305.300095, X, Y) && !ellipse(24897.984000, 22866.394000, 1285.792037, 1285.792037, 0.000000, X, Y) && !ellipse(25985.596000, 20519.094000, 1366.088039, 1366.088039, 0.000000, X, Y) && !ellipse(25160.987244, 22131.714310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24271.290000, 23397.112000, 2571.584074, 2571.584074, 0.000000, X, Y) && !ellipse(24667.842000, 22992.686000, 2446.688070, 2446.688070, 0.000000, X, Y) && !ellipse(25933.631200, 22296.598000, 1308.344038, 1308.344038, 0.000000, X, Y) && !ellipse(24129.514800, 24762.571600, 1171.224034, 673.042419, 211.042000, X, Y) && !ellipse(23530.432000, 24424.430000, 2437.744070, 1872.392054, 239.340000, X, Y) && !ellipse(28644.954000, 20418.646000, 1478.008043, 1478.008043, 0.000000, X, Y) && !ellipse(22693.224000, 25776.794000, 2073.736060, 2073.736060, 0.000000, X, Y) && !ellipse(24637.107400, 24472.067000, 1157.944033, 1157.944033, 0.000000, X, Y) && !ellipse(27231.772000, 22044.294000, 2644.240076, 2644.240076, 0.000000, X, Y) && !ellipse(26852.550000, 21640.130000, 2535.344073, 2535.344073, 0.000000, X, Y) && !ellipse(29072.016000, 19851.626000, 3066.064088, 3066.064088, 0.000000, X, Y) && !ellipse(27229.127600, 22308.802266, 1290.960037, 1290.960037, 0.000000, X, Y) && !ellipse(29598.798000, 19078.266000, 3355.072097, 3355.072097, 0.000000, X, Y) && !ellipse(26678.708191, 23035.644257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31612.874000, 17424.894000, 1758.920051, 1758.920051, 0.000000, X, Y) && !ellipse(27632.180440, 21884.655730, 2581.920074, 585.073727, 52.178202, X, Y) && !ellipse(26265.914000, 23388.826000, 1227.192035, 1227.192035, 0.000000, X, Y) && !ellipse(22385.092000, 26176.172000, 2383.856069, 2383.856069, 0.000000, X, Y) && !ellipse(31208.420000, 17798.584000, 1714.032049, 1714.032049, 0.000000, X, Y) && !ellipse(27909.850586, 20226.775925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25578.934000, 23314.642000, 2454.384071, 2454.384071, 0.000000, X, Y) && !ellipse(32751.490000, 16499.744000, 1759.584051, 1759.584051, 0.000000, X, Y) && !ellipse(25849.308899, 21708.558395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30121.148000, 18890.482000, 2956.016085, 2956.016085, 0.000000, X, Y) && !ellipse(30782.308197, 17707.244720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30819.732000, 18265.856000, 1677.536048, 1677.536048, 0.000000, X, Y) && !ellipse(31893.692000, 16938.490000, 3428.064099, 3428.064099, 0.000000, X, Y) && !ellipse(27151.433200, 19593.436000, 1429.488041, 1429.488041, 0.000000, X, Y) && !ellipse(30398.420000, 18398.946000, 1664.744048, 1664.744048, 0.000000, X, Y) && !ellipse(27219.835022, 20044.865265, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 14 09:46:23 2012] Writing fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src24.gif
[Wed Mar 14 10:29:49 2012] Mean detx,y = (3430.45, -2167.70) 
[Wed Mar 14 10:29:51 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 14 10:30:22 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 14 10:30:22 2012] Setting source spectrum file to fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Wed Mar 14 10:30:22 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src24_bgd.pi.gz
[Fri Mar 16 22:36:10 2012] Updating aperture counts using extracted products
[Fri Mar 16 22:36:10 2012] Error reading totcts from fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src24_src_b10.pi.gz
[Fri Mar 16 22:36:12 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 22:36:12 2012] Using photon index=1.80, rate=0.0108, arf fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src24.arf
[Fri Mar 16 22:36:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 22:36:12 2012] Updating source flux to 1.1e-13
[Fri Mar 16 22:36:20 2012] Flag b found in src. 24 procflags, skipping spectral fitting
[Fri Mar 16 22:36:20 2012] Flag c found in src. 24 procflags, skipping spectral fitting