[Thu Mar 8 18:39:52 2012] Detection parameters: Position = (279.2, 283.1) = 8 48 53.70 -45 37 56.0 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 560.4 +/- 43.9 Background counts = 436.5 Rate = 0.009 +/- 0.0007 [Thu Mar 8 18:39:56 2012] Off-axis axis estimate = 1.78' [Fri Mar 9 12:30:38 2012] Using EEF radius (= 7.32 ")to estimate initial spatial extent for simple fitting [Fri Mar 9 12:30:38 2012] Initial guess for spatial extent in simple fitting = 7.32" [Fri Mar 9 12:30:38 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.840 [Fri Mar 9 12:30:38 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 7.32" [Fri Mar 9 20:35:57 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src12.ximg exists [Fri Mar 9 20:35:57 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src12_1.ximg exists [Fri Mar 9 20:35:57 2012] Fit fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src12 appears to have run properly [Fri Mar 9 20:35:59 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src12.ximg exists [Fri Mar 9 20:35:59 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists [Fri Mar 9 20:35:59 2012] Fit fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly [Sat Mar 10 02:14:11 2012] Spatial fit model total counts = 7447.180000, observed total counts = 7456.000000 [Sat Mar 10 02:14:11 2012] Offset between fit and detection position for source 11 = 2.481077 pixels [Sat Mar 10 02:14:11 2012] 7228.445000 total counts/ 6752.000000 bgd. counts: snr = 5.798245 Spatial fit parameters: Offset between fit and detection position for source 11 = 2.481077 pixels Position = (277.9, 285.2) = 8 48 54.24 -45 37 47.8 Extent = 14.6 (13.4-29.3)" x 8.4 (6.5-10.8)", rotation angle = 211 (196-229) degrees Source counts = 476.4 +/- 85.0 Background counts = 6752.0 Rate = 0.008 +/- 0.001 [Sat Mar 10 02:14:11 2012] Vigneting correction estimate = 1.000000 [Sat Mar 10 02:14:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Mar 10 02:14:11 2012] Assessing source extent using major axis lower bound [Sat Mar 10 02:14:11 2012] Source does appear to be extended [Sat Mar 10 02:14:11 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.25 [Sat Mar 10 02:14:11 2012] Source is confused with source 15 [Sat Mar 10 02:14:11 2012] Source is confused with source 9 [Sat Mar 10 02:14:11 2012] Source is confused with source 14 [Sat Mar 10 23:47:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting [Sat Mar 10 23:47:45 2012] Initial guess for spatial extent in simple fitting = 11.53" [Sat Mar 10 23:47:45 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.907 [Sat Mar 10 23:47:45 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 11.53" [Sun Mar 11 07:03:11 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src11.ximg exists [Sun Mar 11 07:03:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src11.csv [Sun Mar 11 07:03:11 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src11_1.ximg exists [Sun Mar 11 07:03:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src11.csv [Sun Mar 11 07:03:11 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src11_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun Mar 11 07:03:13 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src11.ximg exists [Sun Mar 11 07:03:13 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists [Sun Mar 11 07:03:13 2012] Fit fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly [Sun Mar 11 16:12:51 2012] Warning, spatial fit 11 centroid is now closest to src. 9 [Sun Mar 11 16:12:51 2012] Vigneting correction estimate = 1.000000 [Sun Mar 11 16:12:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Mar 11 16:12:51 2012] Assessing source extent using major axis lower bound [Sun Mar 11 16:12:51 2012] Source does appear to be extended [Sun Mar 11 16:12:51 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.25 [Wed Mar 14 09:46:23 2012] XMMSAS src. selection expression = ellipse(24129.514800, 24762.571600, 878.418025, 504.781815, 211.042000, X, Y) [Wed Mar 14 09:46:23 2012] Writing source region out to fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src11_src.reg [Wed Mar 14 09:46:23 2012] Extracting stamp from image fullrun_mos1_xmm0412990201_pi300-10000_cl_sm2.00.img.gz, (227, 235) - (328, 336) [Wed Mar 14 09:46:23 2012] XMMSAS bgd. selection expression = annulus(24129.514800, 24762.571600, 1464.030042, 2928.060084, X, Y) && !ellipse(24897.984000, 22866.394000, 1285.792037, 1285.792037, 0.000000, X, Y) && !ellipse(25985.596000, 20519.094000, 1366.088039, 1366.088039, 0.000000, X, Y) && !ellipse(25160.987244, 22131.714310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24271.290000, 23397.112000, 2571.584074, 2571.584074, 0.000000, X, Y) && !ellipse(24667.842000, 22992.686000, 2446.688070, 2446.688070, 0.000000, X, Y) && !ellipse(25933.631200, 22296.598000, 1308.344038, 1308.344038, 0.000000, X, Y) && !ellipse(22910.092000, 25464.926000, 1191.928034, 1191.928034, 0.000000, X, Y) && !ellipse(23193.536000, 24646.464000, 1191.928034, 746.223672, 0.000000, X, Y) && !ellipse(27939.402000, 21414.802000, 1322.120038, 1322.120038, 0.000000, X, Y) && !ellipse(23530.432000, 24424.430000, 2437.744070, 1872.392054, 239.340000, X, Y) && !ellipse(23610.500580, 25084.057770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22693.224000, 25776.794000, 2073.736060, 2073.736060, 0.000000, X, Y) && !ellipse(24637.107400, 24472.067000, 1157.944033, 1157.944033, 0.000000, X, Y) && !ellipse(27231.772000, 22044.294000, 2644.240076, 2644.240076, 0.000000, X, Y) && !ellipse(26852.550000, 21640.130000, 2535.344073, 2535.344073, 0.000000, X, Y) && !ellipse(29072.016000, 19851.626000, 3066.064088, 3066.064088, 0.000000, X, Y) && !ellipse(27229.127600, 22308.802266, 1290.960037, 1290.960037, 0.000000, X, Y) && !ellipse(29598.798000, 19078.266000, 3355.072097, 3355.072097, 0.000000, X, Y) && !ellipse(26678.708191, 23035.644257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21135.972000, 26176.934000, 1294.976037, 1294.976037, 0.000000, X, Y) && !ellipse(27632.180440, 21884.655730, 2581.920074, 585.073727, 52.178202, X, Y) && !ellipse(26265.914000, 23388.826000, 1227.192035, 1227.192035, 0.000000, X, Y) && !ellipse(22385.092000, 26176.172000, 2383.856069, 2383.856069, 0.000000, X, Y) && !ellipse(20645.224000, 26443.074000, 1344.368039, 1344.368039, 0.000000, X, Y) && !ellipse(25578.934000, 23314.642000, 2454.384071, 2454.384071, 0.000000, X, Y) && !ellipse(25849.308899, 21708.558395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19851.052000, 27471.200600, 1410.816041, 1410.816041, 0.000000, X, Y) && !ellipse(20472.282000, 26620.680000, 2589.952075, 2589.952075, 0.000000, X, Y) && !ellipse(23618.789581, 23012.404785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19847.426000, 27262.456000, 1408.104041, 1408.104041, 0.000000, X, Y) && !ellipse(21342.104000, 26680.566000, 1327.768038, 1327.768038, 0.000000, X, Y) && !ellipse(20365.995041, 27356.837189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22143.571671, 24433.187958, 870.000000, 870.000000, 0.000000, X, Y) [Wed Mar 14 09:46:23 2012] Writing fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src11.gif [Wed Mar 14 10:29:06 2012] Mean detx,y = (-674.62, 719.70) [Wed Mar 14 10:29:09 2012] Setting backscal keywords in source and bgd. spectrum [Wed Mar 14 10:29:29 2012] Binned source spectrum to 10 counts/bin [Wed Mar 14 10:29:29 2012] Setting source spectrum file to fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src11_src_b10.pi.gz [Wed Mar 14 10:29:29 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src11_bgd.pi.gz [Fri Mar 16 22:36:10 2012] Updating aperture counts using extracted products [Fri Mar 16 22:36:10 2012] Error reading totcts from fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src11_src_b10.pi.gz [Fri Mar 16 22:36:12 2012] Calculating source flux in energy range 0.30-8.00 [Fri Mar 16 22:36:12 2012] Using photon index=1.80, rate=0.00762, arf fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src11.arf [Fri Mar 16 22:36:12 2012] Assuming count rate is from the 0.30-10.00 bandpass [Fri Mar 16 22:36:12 2012] Updating source flux to 7.3e-14 [Fri Mar 16 22:36:20 2012] Flag c found in src. 11 procflags, skipping spectral fitting