[Thu Mar  8 18:39:52 2012] Detection parameters:
  Position = (197.9, 289.1) = 8 49 27.42 -45 37 30.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 311.7 +/- 34.1
  Background counts = 349.6
  Rate = 0.007 +/- 0.0008

[Thu Mar  8 18:39:56 2012] Off-axis axis estimate = 7.32'
[Fri Mar  9 12:30:38 2012] Using EEF radius (= 10.09 ")to estimate initial spatial extent for simple fitting
[Fri Mar  9 12:30:38 2012] Initial guess for spatial extent in simple fitting = 10.09"
[Fri Mar  9 12:30:38 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.132
[Fri Mar  9 12:30:38 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 10.09"
[Fri Mar  9 20:35:57 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src23.ximg exists
[Fri Mar  9 20:35:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src23.csv
[Fri Mar  9 20:35:57 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src23_1.ximg exists
[Fri Mar  9 20:35:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src23.csv
[Fri Mar  9 20:35:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar  9 20:35:59 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Fri Mar  9 20:35:59 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Fri Mar  9 20:35:59 2012] Fit fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Sat Mar 10 02:14:10 2012] Spatial fit model total counts = 4302.260000, observed total counts = 4365.000000
[Sat Mar 10 02:14:10 2012] Offset between fit and detection position for source 10 = 1.895133 pixels
[Sat Mar 10 02:14:10 2012] Warning, changing simple spatial fit ID from 23 to 8
[Sat Mar 10 02:14:10 2012] 4208.211000 total counts/ 3452.930000 bgd. counts: snr = 12.853301
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 1.895133 pixels
  Position = (199.2, 290.5) = 8 49 26.90 -45 37 24.3
  Extent = 16.9 (13.7-20.5)", rotation angle = 0
  Source counts = 755.3 +/- 64.9
  Background counts = 3452.9
  Rate = 0.01 +/- 0.001
[Sat Mar 10 02:14:11 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 02:14:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 02:14:11 2012] Assessing source extent using major axis lower bound
[Sat Mar 10 02:14:11 2012] Source does appear to be extended
[Sat Mar 10 02:14:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 02:14:11 2012] Source is confused with source 4
[Sat Mar 10 23:47:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Mar 10 23:47:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Mar 10 23:47:45 2012] Initial guess for spatial extent in simple fitting = 16.94"
[Sat Mar 10 23:47:45 2012] source mask rpix=3.9, npix_max = 77, mask sum = 81, frac = 1.049
[Sat Mar 10 23:47:45 2012] Giving source the simple spatial ID 21 for pass 1, mean size = 16.94"
[Sun Mar 11 07:03:12 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src21.ximg exists
[Sun Mar 11 07:03:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src21.csv
[Sun Mar 11 07:03:12 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src21_1.ximg exists
[Sun Mar 11 07:03:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src21.csv
[Sun Mar 11 07:03:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 07:03:14 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sun Mar 11 07:03:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src21.csv
[Sun Mar 11 07:03:14 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sun Mar 11 07:03:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src21.csv
[Sun Mar 11 07:03:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar 11 16:12:51 2012] Warning, spatial fit 21 centroid is now closest to src. 39
[Sun Mar 11 16:12:51 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 16:12:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 16:12:51 2012] Assessing source extent using major axis lower bound
[Sun Mar 11 16:12:51 2012] Source does appear to be extended
[Sun Mar 11 16:12:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 14 09:46:24 2012] XMMSAS src. selection expression = ellipse(17277.680000, 25224.636000, 1016.442029, 1016.442029, 0.000000, X, Y)
[Wed Mar 14 09:46:24 2012] Writing source region out to fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src10_src.reg
[Wed Mar 14 09:46:24 2012] Extracting stamp from image fullrun_mos1_xmm0412990201_pi300-10000_cl_sm2.00.img.gz, (141, 232) - (258, 349)
[Wed Mar 14 09:46:24 2012] XMMSAS bgd. selection expression = annulus(17277.680000, 25224.636000, 1694.070049, 3388.140097, X, Y) && !ellipse(17075.824000, 26043.196000, 1348.824039, 1348.824039, 0.000000, X, Y) && !ellipse(22693.224000, 25776.794000, 2073.736060, 2073.736060, 0.000000, X, Y) && !ellipse(21135.972000, 26176.934000, 1294.976037, 1294.976037, 0.000000, X, Y) && !ellipse(22385.092000, 26176.172000, 2383.856069, 2383.856069, 0.000000, X, Y) && !ellipse(20645.224000, 26443.074000, 1344.368039, 1344.368039, 0.000000, X, Y) && !ellipse(15898.037600, 26333.592000, 1627.544047, 1627.544047, 0.000000, X, Y) && !ellipse(19851.052000, 27471.200600, 1410.816041, 1410.816041, 0.000000, X, Y) && !ellipse(20472.282000, 26620.680000, 2589.952075, 2589.952075, 0.000000, X, Y) && !ellipse(19847.426000, 27262.456000, 1408.104041, 1408.104041, 0.000000, X, Y) && !ellipse(21342.104000, 26680.566000, 1327.768038, 1327.768038, 0.000000, X, Y) && !ellipse(20365.995041, 27356.837189, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15786.444000, 26572.636000, 1315.112038, 1315.112038, 0.000000, X, Y) && !ellipse(17911.423111, 23870.717346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19885.205078, 26588.848724, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20260.431076, 26044.676575, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 14 09:46:24 2012] Writing fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src10.gif
[Wed Mar 14 11:57:29 2012] Mean detx,y = (-2765.73, 7244.13) 
[Wed Mar 14 11:57:31 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 14 11:58:19 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 14 11:58:19 2012] Setting source spectrum file to fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Wed Mar 14 11:58:19 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Fri Mar 16 22:36:10 2012] Updating aperture counts using extracted products
[Fri Mar 16 22:36:10 2012] Error reading totcts from fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Fri Mar 16 22:36:12 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 22:36:12 2012] Using photon index=1.80, rate=0.0121, arf fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src10.arf
[Fri Mar 16 22:36:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 22:36:12 2012] Updating source flux to 1.4e-13
[Fri Mar 16 22:36:20 2012] Flag c found in src. 10 procflags, skipping spectral fitting