[Thu Mar  8 18:39:51 2012] Detection parameters:
  Position = (289.2, 261.3) = 8 48 49.55 -45 39 36.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 811.8 +/- 44.6
  Background counts = 439.8
  Rate = 0.01 +/- 0.0008

[Thu Mar  8 18:39:56 2012] Off-axis axis estimate = 2.78'
[Fri Mar  9 12:30:37 2012] Using EEF radius (= 7.82 ")to estimate initial spatial extent for simple fitting
[Fri Mar  9 12:30:37 2012] Initial guess for spatial extent in simple fitting = 7.82"
[Fri Mar  9 12:30:37 2012] source mask rpix=1.8, npix_max = 21, mask sum = 23, frac = 1.090
[Fri Mar  9 12:30:37 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 7.82"
[Fri Mar  9 20:35:57 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src2.ximg exists
[Fri Mar  9 20:35:57 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Mar  9 20:35:57 2012] Fit fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_src2 appears to have run properly
[Fri Mar  9 20:35:59 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Mar  9 20:35:59 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Mar  9 20:35:59 2012] Fit fullrun_mos1_xmm0412990201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sat Mar 10 02:14:10 2012] Spatial fit model total counts = 8113.620000, observed total counts = 8058.000000
[Sat Mar 10 02:14:10 2012] Offset between fit and detection position for source 1 = 2.662276 pixels
[Sat Mar 10 02:14:10 2012] 8148.875000 total counts/ 7547.510000 bgd. counts: snr = 6.922075
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 2.662276 pixels
  Position = (286.9, 262.6) = 8 48 50.50 -45 39 26.0
  Extent = 15.6 (13.3-31.3)" x 10.8 (8.2-14.3)", rotation angle = 194 (90-119) degrees
  Source counts = 601.4 +/- 90.3
  Background counts = 7547.5
  Rate = 0.01 +/- 0.001
[Sat Mar 10 02:14:10 2012] Spatial fit model total counts = 7272.560000, observed total counts = 7203.000000
[Sat Mar 10 02:14:10 2012] Offset between fit and detection position for source 1 = 0.763626 pixels
[Sat Mar 10 02:14:10 2012] Warning, changing simple spatial fit ID from 2 to 4
[Sat Mar 10 02:14:10 2012] 7241.377000 total counts/ 6671.280000 bgd. counts: snr = 6.979819
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.763626 pixels
  Position = (286.9, 263.4) = 8 48 50.50 -45 39 22.6
  Extent = 16.1 (16.0-32.1)", rotation angle = 0
  Source counts = 570.1 +/- 85.1
  Background counts = 6671.3
  Rate = 0.009 +/- 0.001
[Sat Mar 10 02:14:11 2012] Vigneting correction estimate = 1.000000
[Sat Mar 10 02:14:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 10 02:14:11 2012] Assessing source extent using major axis lower bound
[Sat Mar 10 02:14:11 2012] Source does appear to be extended
[Sat Mar 10 02:14:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 10 02:14:11 2012] Source is confused with source 20
[Sat Mar 10 02:14:11 2012] Source is confused with source 17
[Sat Mar 10 02:14:11 2012] Source is confused with source 16
[Sat Mar 10 23:47:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Mar 10 23:47:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Mar 10 23:47:45 2012] Initial guess for spatial extent in simple fitting = 16.07"
[Sat Mar 10 23:47:45 2012] source mask rpix=3.7, npix_max = 70, mask sum = 71, frac = 1.009
[Sat Mar 10 23:47:45 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 16.07"
[Sun Mar 11 07:03:11 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src2.ximg exists
[Sun Mar 11 07:03:11 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun Mar 11 07:03:11 2012] Fit fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_src2 appears to have run properly
[Sun Mar 11 07:03:13 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun Mar 11 07:03:13 2012] fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun Mar 11 07:03:13 2012] Fit fullrun_mos1_xmm0412990201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sun Mar 11 16:12:51 2012] Warning, spatial fit 2 centroid is now closest to src. 17
[Sun Mar 11 16:12:51 2012] Spatial fit model total counts = 7258.380000, observed total counts = 7203.000000
[Sun Mar 11 16:12:51 2012] Offset between fit and detection position for source 1 = 0.205632 pixels
[Sun Mar 11 16:12:51 2012] Warning, changing simple spatial fit ID from 2 to 4
[Sun Mar 11 16:12:51 2012] 7123.821000 total counts/ 6479.130000 bgd. counts: snr = 8.009276
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.205632 pixels
  Position = (286.7, 263.4) = 8 48 50.58 -45 39 22.6
  Extent = 16.1 (16.0-32.1)", rotation angle = 0
  Source counts = 644.7 +/- 84.4
  Background counts = 6479.1
  Rate = 0.01 +/- 0.001
[Sun Mar 11 16:12:51 2012] Vigneting correction estimate = 1.000000
[Sun Mar 11 16:12:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar 11 16:12:51 2012] Assessing source extent using major axis lower bound
[Sun Mar 11 16:12:51 2012] Source does appear to be extended
[Sun Mar 11 16:12:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 14 09:46:22 2012] XMMSAS src. selection expression = ellipse(24897.984000, 22866.394000, 964.344028, 964.344028, 0.000000, X, Y)
[Wed Mar 14 09:46:22 2012] Writing source region out to fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src1_src.reg
[Wed Mar 14 09:46:22 2012] Extracting stamp from image fullrun_mos1_xmm0412990201_pi300-10000_cl_sm2.00.img.gz, (231, 208) - (342, 319)
[Wed Mar 14 09:46:22 2012] XMMSAS bgd. selection expression = annulus(24897.984000, 22866.394000, 1607.240046, 3214.480092, X, Y) && !ellipse(25985.596000, 20519.094000, 1366.088039, 1366.088039, 0.000000, X, Y) && !ellipse(25160.987244, 22131.714310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24271.290000, 23397.112000, 2571.584074, 2571.584074, 0.000000, X, Y) && !ellipse(24667.842000, 22992.686000, 2446.688070, 2446.688070, 0.000000, X, Y) && !ellipse(25933.631200, 22296.598000, 1308.344038, 1308.344038, 0.000000, X, Y) && !ellipse(22910.092000, 25464.926000, 1191.928034, 1191.928034, 0.000000, X, Y) && !ellipse(23193.536000, 24646.464000, 1191.928034, 746.223672, 0.000000, X, Y) && !ellipse(24129.514800, 24762.571600, 1171.224034, 673.042419, 211.042000, X, Y) && !ellipse(27939.402000, 21414.802000, 1322.120038, 1322.120038, 0.000000, X, Y) && !ellipse(23530.432000, 24424.430000, 2437.744070, 1872.392054, 239.340000, X, Y) && !ellipse(23610.500580, 25084.057770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28644.954000, 20418.646000, 1478.008043, 1478.008043, 0.000000, X, Y) && !ellipse(22693.224000, 25776.794000, 2073.736060, 2073.736060, 0.000000, X, Y) && !ellipse(24637.107400, 24472.067000, 1157.944033, 1157.944033, 0.000000, X, Y) && !ellipse(27231.772000, 22044.294000, 2644.240076, 2644.240076, 0.000000, X, Y) && !ellipse(26852.550000, 21640.130000, 2535.344073, 2535.344073, 0.000000, X, Y) && !ellipse(29072.016000, 19851.626000, 3066.064088, 3066.064088, 0.000000, X, Y) && !ellipse(27229.127600, 22308.802266, 1290.960037, 1290.960037, 0.000000, X, Y) && !ellipse(29598.798000, 19078.266000, 3355.072097, 3355.072097, 0.000000, X, Y) && !ellipse(26678.708191, 23035.644257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21135.972000, 26176.934000, 1294.976037, 1294.976037, 0.000000, X, Y) && !ellipse(27632.180440, 21884.655730, 2581.920074, 585.073727, 52.178202, X, Y) && !ellipse(26265.914000, 23388.826000, 1227.192035, 1227.192035, 0.000000, X, Y) && !ellipse(22385.092000, 26176.172000, 2383.856069, 2383.856069, 0.000000, X, Y) && !ellipse(27909.850586, 20226.775925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20645.224000, 26443.074000, 1344.368039, 1344.368039, 0.000000, X, Y) && !ellipse(25578.934000, 23314.642000, 2454.384071, 2454.384071, 0.000000, X, Y) && !ellipse(25849.308899, 21708.558395, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30121.148000, 18890.482000, 2956.016085, 2956.016085, 0.000000, X, Y) && !ellipse(20472.282000, 26620.680000, 2589.952075, 2589.952075, 0.000000, X, Y) && !ellipse(23618.789581, 23012.404785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21342.104000, 26680.566000, 1327.768038, 1327.768038, 0.000000, X, Y) && !ellipse(27151.433200, 19593.436000, 1429.488041, 1429.488041, 0.000000, X, Y) && !ellipse(27219.835022, 20044.865265, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22143.571671, 24433.187958, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 14 09:46:22 2012] Writing fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src1.gif
[Wed Mar 14 09:47:52 2012] Mean detx,y = (1279.16, 349.63) 
[Wed Mar 14 09:47:54 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 14 09:48:30 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 14 09:48:30 2012] Setting source spectrum file to fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Wed Mar 14 09:48:30 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Mar 16 22:36:10 2012] Updating aperture counts using extracted products
[Fri Mar 16 22:36:10 2012] Error reading totcts from fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Mar 16 22:36:12 2012] Calculating source flux in energy range 0.30-8.00
[Fri Mar 16 22:36:12 2012] Using photon index=1.80, rate=0.0103, arf fullrun_mos1_xmm0412990201_pi300-10000_pass1_cl_src1.arf
[Fri Mar 16 22:36:12 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Mar 16 22:36:12 2012] Updating source flux to 9.4e-14
[Fri Mar 16 22:36:20 2012] Flag c found in src. 1 procflags, skipping spectral fitting