[Sat Dec 24 00:43:57 2011] Detection parameters:
  Position = (233.4, 295.4) = 8 49 53.68 -45 33 38.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 251.1 +/- 45.4
  Background counts = 1103.4
  Rate = 0.006 +/- 0.001

[Sat Dec 24 00:44:02 2011] Off-axis axis estimate = 4.72'
[Sat Dec 24 01:08:19 2011] Using EEF radius (= 8.79 ")to estimate initial spatial extent for simple fitting
[Sat Dec 24 01:08:19 2011] Initial guess for spatial extent in simple fitting = 8.79"
[Sat Dec 24 01:08:19 2011] source mask rpix=2.0, npix_max = 25, mask sum = 24, frac = 0.945
[Sat Dec 24 01:08:19 2011] Giving source the simple spatial ID 52 for pass 0, mean size = 8.79"
[Sat Dec 24 19:47:39 2011] fullrun_pn_xmm0412990101_pi300-10000_cl_pass0_src52.ximg exists
[Sat Dec 24 19:47:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990101_pi300-10000_cl_pass0_src52.csv
[Sat Dec 24 19:47:39 2011] fullrun_pn_xmm0412990101_pi300-10000_cl_pass0_src52_1.ximg exists
[Sat Dec 24 19:47:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990101_pi300-10000_cl_pass0_src52.csv
[Sat Dec 24 19:47:39 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990101_pi300-10000_cl_pass0_src52_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990101_pi300-10000_cl_pass0_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 24 19:47:43 2011] fullrun_pn_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src52.ximg exists
[Sat Dec 24 19:47:43 2011] fullrun_pn_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src52_1.ximg exists
[Sat Dec 24 19:47:43 2011] Fit fullrun_pn_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src52 appears to have run properly
[Sun Dec 25 22:24:27 2011] Warning, spatial fit 52 centroid is now closest to src. 10
[Sun Dec 25 22:24:28 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 22:24:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 22:24:28 2011] Assessing source extent using major
[Sun Dec 25 22:24:28 2011] Source does appear to be extended
[Sun Dec 25 22:24:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 22:24:28 2011] Source is confused with source 10
[Sun Dec 25 22:27:09 2011] Using EEF radius (= 8.79 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 22:27:09 2011] Initial guess for spatial extent in simple fitting = 8.79"
[Sun Dec 25 22:27:09 2011] source mask rpix=2.0, npix_max = 25, mask sum = 24, frac = 0.945
[Sun Dec 25 22:27:09 2011] Giving source the simple spatial ID 49 for pass 1, mean size = 8.79"
[Tue Dec 27 08:47:43 2011] fullrun_pn_xmm0412990101_pi300-10000_cl_pass1_src49.ximg exists
[Tue Dec 27 08:47:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990101_pi300-10000_cl_pass1_src49.csv
[Tue Dec 27 08:47:43 2011] fullrun_pn_xmm0412990101_pi300-10000_cl_pass1_src49_1.ximg exists
[Tue Dec 27 08:47:43 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990101_pi300-10000_cl_pass1_src49.csv
[Tue Dec 27 08:47:43 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990101_pi300-10000_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990101_pi300-10000_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 27 08:47:46 2011] fullrun_pn_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Tue Dec 27 08:47:46 2011] fullrun_pn_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Tue Dec 27 08:47:46 2011] Fit fullrun_pn_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src49 appears to have run properly
[Thu Dec 29 13:37:57 2011] Warning, spatial fit 49 centroid is now closest to src. 67
[Thu Dec 29 13:37:57 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 13:37:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 13:37:57 2011] Assessing source extent using major
[Thu Dec 29 13:37:57 2011] Source does appear to be extended
[Thu Dec 29 13:37:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 13:40:22 2011] XMMSAS src. selection expression = ellipse(20258.552643, 25647.999268, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Dec 29 13:40:22 2011] Writing source region out to fullrun_pn_xmm0412990101_pi300-10000_pass1_cl_src72_src.reg
[Thu Dec 29 13:40:22 2011] Extracting stamp from image fullrun_pn_xmm0412990101_pi300-10000_cl_sm2.00.img.gz, (196, 258) - (271, 333)
[Thu Dec 29 13:40:22 2011] XMMSAS bgd. selection expression = annulus(20258.552643, 25647.999268, 1087.500000, 2175.000000, X, Y) && !ellipse(20196.259018, 23894.485168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18544.862000, 26644.962000, 1501.128043, 1501.128043, 0.000000, X, Y) && !ellipse(19782.901489, 25584.382111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22021.798752, 24235.736084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23254.034000, 23163.387580, 1225.376035, 1225.376035, 0.000000, X, Y) && !ellipse(21162.138763, 27623.306549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17863.075200, 29458.498000, 2045.416059, 2045.416059, 0.000000, X, Y) && !ellipse(24228.232000, 28289.706000, 2428.240070, 2428.240070, 0.000000, X, Y) && !ellipse(21882.460000, 27254.422000, 639.313618, 639.313618, 0.000000, X, Y) && !ellipse(18671.559200, 28192.142000, 1753.216050, 1753.216050, 0.000000, X, Y) && !ellipse(20434.154044, 27246.868000, 1423.624041, 891.216026, 67.082000, X, Y) && !ellipse(19700.888000, 27923.920000, 553.828816, 553.828816, 0.000000, X, Y) && !ellipse(18803.596800, 27591.292000, 1107.808032, 1107.808032, 0.000000, X, Y) && !ellipse(20436.620148, 26837.274506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22478.741241, 26740.206635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20539.302800, 26377.316000, 1398.960040, 1398.960040, 0.000000, X, Y) && !ellipse(22562.574000, 25903.186000, 1272.336037, 1272.336037, 0.000000, X, Y) && !ellipse(18570.094600, 26700.060000, 1505.216043, 1505.216043, 0.000000, X, Y) && !ellipse(20467.258000, 26044.768000, 1742.616050, 1742.616050, 0.000000, X, Y) && !ellipse(20929.916000, 25792.486000, 2544.672073, 341.267210, 78.799700, X, Y) && !ellipse(20772.972000, 24868.364000, 1469.816042, 1469.816042, 0.000000, X, Y) && !ellipse(22104.494000, 25580.292000, 1276.528037, 1276.528037, 0.000000, X, Y) && !ellipse(18025.640000, 23852.490000, 1545.384044, 1545.384044, 0.000000, X, Y) && !ellipse(19736.344000, 23643.876000, 1480.088043, 1480.088043, 0.000000, X, Y) && !ellipse(22876.226600, 23202.380000, 1146.984033, 1146.984033, 0.000000, X, Y) && !ellipse(29123.262000, 23124.942000, 8448.840243, 8448.840243, 0.000000, X, Y) && !ellipse(23940.594000, 22087.910000, 8044.080231, 8044.080231, 0.000000, X, Y) && !ellipse(30841.998000, 21519.808000, 8531.400245, 8531.400245, 0.000000, X, Y)
[Thu Dec 29 13:40:22 2011] Writing fullrun_pn_xmm0412990101_pi300-10000_pass1_cl_src72.gif
[Thu Dec 29 21:10:15 2011] Mean detx,y = (4403.38, 2566.57) 
[Thu Dec 29 21:10:21 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec 29 21:11:14 2011] Binned source spectrum to 10 counts/bin
[Thu Dec 29 21:11:15 2011] Setting source spectrum file to fullrun_pn_xmm0412990101_pi300-10000_pass1_cl_src72_src_b10.pi.gz
[Thu Dec 29 21:11:15 2011] Setting bgd. spectrum file to fullrun_pn_xmm0412990101_pi300-10000_pass1_cl_src72_bgd.pi.gz
[Fri Dec 30 18:05:35 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Dec 30 18:05:35 2011] rmf not generated due to insufficient counts
[Tue Jan  3 09:12:17 2012] Updating aperture counts using extracted products
[Tue Jan  3 09:12:17 2012] Error reading totcts from fullrun_pn_xmm0412990101_pi300-10000_pass1_cl_src72_src_b10.pi.gz
[Tue Jan  3 09:12:26 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 09:12:26 2012] Using photon index=1.80, rate=0.00571, arf fullrun_pn_xmm0412990101_pi300-10000_pass1_cl_src72.arf
[Tue Jan  3 09:12:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 09:12:26 2012] Updating source flux to 1.7e-14
[Tue Jan  3 09:33:18 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting