[Sat Dec 24 00:43:57 2011] Detection parameters:
  Position = (268.5, 302.0) = 8 49 39.16 -45 33 10.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 905.6 +/- 63.3
  Background counts = 1197.2
  Rate = 0.02 +/- 0.001

[Sat Dec 24 00:44:02 2011] Off-axis axis estimate = 2.19'
[Sat Dec 24 01:08:19 2011] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting
[Sat Dec 24 01:08:19 2011] Initial guess for spatial extent in simple fitting = 7.52"
[Sat Dec 24 01:08:19 2011] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.006
[Sat Dec 24 01:08:19 2011] Giving source the simple spatial ID 48 for pass 0, mean size = 7.52"
[Sat Dec 24 19:47:39 2011] fullrun_pn_xmm0412990101_pi300-10000_cl_pass0_src48.ximg exists
[Sat Dec 24 19:47:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990101_pi300-10000_cl_pass0_src48.csv
[Sat Dec 24 19:47:39 2011] fullrun_pn_xmm0412990101_pi300-10000_cl_pass0_src48_1.ximg exists
[Sat Dec 24 19:47:39 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990101_pi300-10000_cl_pass0_src48.csv
[Sat Dec 24 19:47:39 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990101_pi300-10000_cl_pass0_src48_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990101_pi300-10000_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 24 19:47:43 2011] fullrun_pn_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Sat Dec 24 19:47:43 2011] fullrun_pn_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Sat Dec 24 19:47:43 2011] Fit fullrun_pn_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src48 appears to have run properly
[Sun Dec 25 22:24:27 2011] Spatial fit model total counts = 18011.800000, observed total counts = 18000.000000
[Sun Dec 25 22:24:27 2011] Offset between fit and detection position for source 68 = 0.611257 pixels
[Sun Dec 25 22:24:27 2011] 17763.463000 total counts/ 17383.300000 bgd. counts: snr = 2.883392
Spatial fit parameters:
  Offset between fit and detection position for source 68 = 0.611257 pixels
  Position = (268.0, 302.4) = 8 49 39.34 -45 33 8.3
  Extent = 9.9 (5.9-15.0)", rotation angle = 0
  Source counts = 380.2 +/- 133.3
  Background counts = 17383.3
  Rate = 0.006 +/- 0.002
[Sun Dec 25 22:24:28 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 22:24:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 22:24:28 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 22:24:28 2011] Source does appear to be extended
[Sun Dec 25 22:24:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 22:27:09 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec 25 22:27:09 2011] Initial guess for spatial extent in simple fitting = 9.93"
[Sun Dec 25 22:27:09 2011] source mask rpix=2.3, npix_max = 30, mask sum = 30, frac = 0.968
[Sun Dec 25 22:27:09 2011] Giving source the simple spatial ID 45 for pass 1, mean size = 9.93"
[Tue Dec 27 08:47:43 2011] fullrun_pn_xmm0412990101_pi300-10000_cl_pass1_src45.ximg exists
[Tue Dec 27 08:47:43 2011] fullrun_pn_xmm0412990101_pi300-10000_cl_pass1_src45_1.ximg exists
[Tue Dec 27 08:47:43 2011] Fit fullrun_pn_xmm0412990101_pi300-10000_cl_pass1_src45 appears to have run properly
[Tue Dec 27 08:47:46 2011] fullrun_pn_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src45.ximg exists
[Tue Dec 27 08:47:46 2011] fullrun_pn_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists
[Tue Dec 27 08:47:46 2011] Fit fullrun_pn_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src45 appears to have run properly
[Thu Dec 29 13:37:57 2011] Warning, spatial fit 45 centroid is now closest to src. 60
[Thu Dec 29 13:37:57 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 13:37:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 13:37:57 2011] Assessing source extent using major axis lower bound
[Thu Dec 29 13:37:57 2011] Source does appear to be extended
[Thu Dec 29 13:37:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 13:37:58 2011] Source is confused with source 65
[Thu Dec 29 13:40:21 2011] XMMSAS src. selection expression = ellipse(23270.195660, 26260.534400, 595.959617, 595.959617, 0.000000, X, Y)
[Thu Dec 29 13:40:21 2011] Writing source region out to fullrun_pn_xmm0412990101_pi300-10000_pass1_cl_src68_src.reg
[Thu Dec 29 13:40:21 2011] Extracting stamp from image fullrun_pn_xmm0412990101_pi300-10000_cl_sm2.00.img.gz, (234, 268) - (302, 337)
[Thu Dec 29 13:40:21 2011] XMMSAS bgd. selection expression = annulus(23270.195660, 26260.534400, 993.266029, 1986.532057, X, Y) && !ellipse(26515.843384, 23032.381226, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(22021.798752, 24235.736084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23254.034000, 23163.387580, 1225.376035, 1225.376035, 0.000000, X, Y) && !ellipse(21162.138763, 27623.306549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25950.539480, 28395.640000, 1059.288030, 1059.288030, 0.000000, X, Y) && !ellipse(24228.232000, 28289.706000, 2428.240070, 2428.240070, 0.000000, X, Y) && !ellipse(23371.224030, 28457.771637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25760.960000, 27956.402000, 1968.832057, 1968.832057, 0.000000, X, Y) && !ellipse(24510.590027, 27860.756439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23435.974884, 27874.326294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21882.460000, 27254.422000, 639.313618, 639.313618, 0.000000, X, Y) && !ellipse(24929.830000, 27444.852000, 1150.216033, 1150.216033, 0.000000, X, Y) && !ellipse(20434.154044, 27246.868000, 1423.624041, 891.216026, 67.082000, X, Y) && !ellipse(23895.658000, 27645.970000, 1188.544034, 1188.544034, 0.000000, X, Y) && !ellipse(24410.399841, 26998.902069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20436.620148, 26837.274506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22478.741241, 26740.206635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20539.302800, 26377.316000, 1398.960040, 1398.960040, 0.000000, X, Y) && !ellipse(24490.836609, 26152.181366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22562.574000, 25903.186000, 1272.336037, 1272.336037, 0.000000, X, Y) && !ellipse(20467.258000, 26044.768000, 1742.616050, 1742.616050, 0.000000, X, Y) && !ellipse(20929.916000, 25792.486000, 2544.672073, 341.267210, 78.799700, X, Y) && !ellipse(23310.492889, 25186.674652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24633.101044, 25088.629730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23777.910797, 25101.235809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20772.972000, 24868.364000, 1469.816042, 1469.816042, 0.000000, X, Y) && !ellipse(25224.494000, 24858.928000, 1130.296033, 1130.296033, 0.000000, X, Y) && !ellipse(22104.494000, 25580.292000, 1276.528037, 1276.528037, 0.000000, X, Y) && !ellipse(23381.156494, 24499.335358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25502.162000, 24812.152000, 1124.248032, 1124.248032, 0.000000, X, Y) && !ellipse(24035.568115, 24485.428314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25959.401400, 24053.561200, 1146.984033, 1146.984033, 0.000000, X, Y) && !ellipse(22876.226600, 23202.380000, 1146.984033, 1146.984033, 0.000000, X, Y) && !ellipse(23941.140000, 23276.204000, 1226.496035, 1226.496035, 0.000000, X, Y) && !ellipse(29123.262000, 23124.942000, 8448.840243, 8448.840243, 0.000000, X, Y) && !ellipse(23940.594000, 22087.910000, 8044.080231, 8044.080231, 0.000000, X, Y) && !ellipse(30841.998000, 21519.808000, 8531.400245, 8531.400245, 0.000000, X, Y)
[Thu Dec 29 13:40:21 2011] Writing fullrun_pn_xmm0412990101_pi300-10000_pass1_cl_src68.gif
[Thu Dec 29 20:22:18 2011] Mean detx,y = (1438.94, 2439.25) 
[Thu Dec 29 20:22:25 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec 29 20:23:59 2011] Binned source spectrum to 10 counts/bin
[Thu Dec 29 20:24:00 2011] Setting source spectrum file to fullrun_pn_xmm0412990101_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Thu Dec 29 20:24:00 2011] Setting bgd. spectrum file to fullrun_pn_xmm0412990101_pi300-10000_pass1_cl_src68_bgd.pi.gz
[Tue Jan  3 09:12:17 2012] Updating aperture counts using extracted products
[Tue Jan  3 09:12:17 2012] Error reading totcts from fullrun_pn_xmm0412990101_pi300-10000_pass1_cl_src68_src_b10.pi.gz
[Tue Jan  3 09:12:26 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 09:12:26 2012] Using photon index=1.80, rate=0.00643, arf fullrun_pn_xmm0412990101_pi300-10000_pass1_cl_src68.arf
[Tue Jan  3 09:12:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 09:12:26 2012] Updating source flux to 1.6e-14
[Tue Jan  3 09:33:18 2012] Flag c found in src. 68 procflags, skipping spectral fitting