[Sat Dec 24 00:43:56 2011] Detection parameters:
  Position = (274.2, 313.9) = 8 49 36.77 -45 32 18.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 557.1 +/- 53.5
  Background counts = 1056.0
  Rate = 0.01 +/- 0.001

[Sat Dec 24 00:44:02 2011] Off-axis axis estimate = 2.08'
[Sat Dec 24 01:08:19 2011] Using EEF radius (= 7.47 ")to estimate initial spatial extent for simple fitting
[Sat Dec 24 01:08:19 2011] Initial guess for spatial extent in simple fitting = 7.47"
[Sat Dec 24 01:08:19 2011] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.814
[Sat Dec 24 01:08:19 2011] Giving source the simple spatial ID 34 for pass 0, mean size = 7.47"
[Sat Dec 24 19:47:38 2011] fullrun_pn_xmm0412990101_pi300-10000_cl_pass0_src34.ximg exists
[Sat Dec 24 19:47:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990101_pi300-10000_cl_pass0_src34.csv
[Sat Dec 24 19:47:38 2011] fullrun_pn_xmm0412990101_pi300-10000_cl_pass0_src34_1.ximg exists
[Sat Dec 24 19:47:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990101_pi300-10000_cl_pass0_src34.csv
[Sat Dec 24 19:47:38 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990101_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990101_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 24 19:47:42 2011] fullrun_pn_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Sat Dec 24 19:47:42 2011] fullrun_pn_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Sat Dec 24 19:47:42 2011] Fit fullrun_pn_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src34 appears to have run properly
[Sun Dec 25 22:24:27 2011] Spatial fit model total counts = 12123.500000, observed total counts = 12130.000000
[Sun Dec 25 22:24:27 2011] Offset between fit and detection position for source 54 = 2.853143 pixels
[Sun Dec 25 22:24:27 2011] Warning, changing simple spatial fit ID from 34 to 18
[Sun Dec 25 22:24:27 2011] 12024.717000 total counts/ 11527.200000 bgd. counts: snr = 4.633893
Spatial fit parameters:
  Offset between fit and detection position for source 54 = 2.853143 pixels
  Position = (275.0, 316.7) = 8 49 36.44 -45 32 6.2
  Extent = 15.2 (15.2-30.4)", rotation angle = 0
  Source counts = 497.5 +/- 109.7
  Background counts = 11527.2
  Rate = 0.008 +/- 0.002
[Sun Dec 25 22:24:27 2011] Source 54 is offset by -0.482692 and 2.256299 pixels which is larger than
2 X fitted extent = 0.862676 x 0.862676, not incorporating fit results
[Sun Dec 25 22:24:27 2011] Source 54 is offset by 0.328457 and 2.384529 pixels which is larger than
2 X fitted extent = 1.573917 x 1.573917, not incorporating fit results
[Sun Dec 25 22:24:28 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 22:24:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 22:24:28 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 22:24:28 2011] Source does appear to be extended
[Sun Dec 25 22:24:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 22:24:28 2011] Source is confused with source 41
[Sun Dec 25 22:27:09 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec 25 22:27:09 2011] Initial guess for spatial extent in simple fitting = 15.19"
[Sun Dec 25 22:27:09 2011] source mask rpix=3.5, npix_max = 63, mask sum = 64, frac = 1.004
[Sun Dec 25 22:27:09 2011] Giving source the simple spatial ID 32 for pass 1, mean size = 15.19"
[Tue Dec 27 08:47:43 2011] fullrun_pn_xmm0412990101_pi300-10000_cl_pass1_src32.ximg exists
[Tue Dec 27 08:47:43 2011] fullrun_pn_xmm0412990101_pi300-10000_cl_pass1_src32_1.ximg exists
[Tue Dec 27 08:47:43 2011] Fit fullrun_pn_xmm0412990101_pi300-10000_cl_pass1_src32 appears to have run properly
[Tue Dec 27 08:47:45 2011] fullrun_pn_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Tue Dec 27 08:47:45 2011] fullrun_pn_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Tue Dec 27 08:47:45 2011] Fit fullrun_pn_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src32 appears to have run properly
[Thu Dec 29 13:37:57 2011] Spatial fit model total counts = 12366.600000, observed total counts = 12368.000000
[Thu Dec 29 13:37:57 2011] Offset between fit and detection position for source 54 = 1.651483 pixels
[Thu Dec 29 13:37:57 2011] Warning, changing simple spatial fit ID from 32 to 19
[Thu Dec 29 13:37:57 2011] 12174.246000 total counts/ 11856.900000 bgd. counts: snr = 2.914389
Spatial fit parameters:
  Offset between fit and detection position for source 54 = 1.651483 pixels
  Position = (275.2, 318.3) = 8 49 36.36 -45 31 59.1
  Extent = 14.9 (14.8-29.7)", rotation angle = 0
  Source counts = 317.3 +/- 110.3
  Background counts = 11856.9
  Rate = 0.005 +/- 0.002
[Thu Dec 29 13:37:57 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 13:37:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 13:37:57 2011] Assessing source extent using major axis lower bound
[Thu Dec 29 13:37:57 2011] Source does appear to be extended
[Thu Dec 29 13:37:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 13:40:19 2011] XMMSAS src. selection expression = ellipse(23895.658000, 27645.970000, 891.408026, 891.408026, 0.000000, X, Y)
[Thu Dec 29 13:40:19 2011] Writing source region out to fullrun_pn_xmm0412990101_pi300-10000_pass1_cl_src54_src.reg
[Thu Dec 29 13:40:19 2011] Extracting stamp from image fullrun_pn_xmm0412990101_pi300-10000_cl_sm2.00.img.gz, (224, 267) - (326, 370)
[Thu Dec 29 13:40:20 2011] XMMSAS bgd. selection expression = annulus(23895.658000, 27645.970000, 1485.680043, 2971.360085, X, Y) && !ellipse(26515.843384, 23032.381226, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(20196.259018, 23894.485168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22021.798752, 24235.736084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21162.138763, 27623.306549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26647.512000, 29559.730000, 1251.528036, 857.096025, 90.000000, X, Y) && !ellipse(25950.539480, 28395.640000, 1059.288030, 1059.288030, 0.000000, X, Y) && !ellipse(24228.232000, 28289.706000, 2428.240070, 2428.240070, 0.000000, X, Y) && !ellipse(23371.224030, 28457.771637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25760.960000, 27956.402000, 1968.832057, 1968.832057, 0.000000, X, Y) && !ellipse(24510.590027, 27860.756439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23435.974884, 27874.326294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21882.460000, 27254.422000, 639.313618, 639.313618, 0.000000, X, Y) && !ellipse(24929.830000, 27444.852000, 1150.216033, 1150.216033, 0.000000, X, Y) && !ellipse(20434.154044, 27246.868000, 1423.624041, 891.216026, 67.082000, X, Y) && !ellipse(24410.399841, 26998.902069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20436.620148, 26837.274506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22478.741241, 26740.206635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20539.302800, 26377.316000, 1398.960040, 1398.960040, 0.000000, X, Y) && !ellipse(24490.836609, 26152.181366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22562.574000, 25903.186000, 1272.336037, 1272.336037, 0.000000, X, Y) && !ellipse(23270.195660, 26260.534400, 794.612823, 794.612823, 0.000000, X, Y) && !ellipse(20467.258000, 26044.768000, 1742.616050, 1742.616050, 0.000000, X, Y) && !ellipse(20929.916000, 25792.486000, 2544.672073, 341.267210, 78.799700, X, Y) && !ellipse(20258.552643, 25647.999268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23310.492889, 25186.674652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24633.101044, 25088.629730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23777.910797, 25101.235809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20772.972000, 24868.364000, 1469.816042, 1469.816042, 0.000000, X, Y) && !ellipse(25224.494000, 24858.928000, 1130.296033, 1130.296033, 0.000000, X, Y) && !ellipse(22104.494000, 25580.292000, 1276.528037, 1276.528037, 0.000000, X, Y) && !ellipse(23381.156494, 24499.335358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25502.162000, 24812.152000, 1124.248032, 1124.248032, 0.000000, X, Y) && !ellipse(24035.568115, 24485.428314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26997.796900, 24091.346600, 984.560028, 984.560028, 0.000000, X, Y) && !ellipse(25959.401400, 24053.561200, 1146.984033, 1146.984033, 0.000000, X, Y) && !ellipse(19736.344000, 23643.876000, 1480.088043, 1480.088043, 0.000000, X, Y) && !ellipse(29123.262000, 23124.942000, 8448.840243, 8448.840243, 0.000000, X, Y) && !ellipse(23940.594000, 22087.910000, 8044.080231, 8044.080231, 0.000000, X, Y) && !ellipse(30841.998000, 21519.808000, 8531.400245, 8531.400245, 0.000000, X, Y)
[Thu Dec 29 13:40:20 2011] Writing fullrun_pn_xmm0412990101_pi300-10000_pass1_cl_src54.gif
[Thu Dec 29 19:27:24 2011] Mean detx,y = (510.48, 3588.79) 
[Thu Dec 29 19:27:33 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec 29 19:29:01 2011] Binned source spectrum to 10 counts/bin
[Thu Dec 29 19:29:02 2011] Setting source spectrum file to fullrun_pn_xmm0412990101_pi300-10000_pass1_cl_src54_src_b10.pi.gz
[Thu Dec 29 19:29:02 2011] Setting bgd. spectrum file to fullrun_pn_xmm0412990101_pi300-10000_pass1_cl_src54_bgd.pi.gz
[Tue Jan  3 09:12:16 2012] Updating aperture counts using extracted products
[Tue Jan  3 09:12:16 2012] Error reading totcts from fullrun_pn_xmm0412990101_pi300-10000_pass1_cl_src54_src_b10.pi.gz
[Tue Jan  3 09:12:25 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 09:12:25 2012] Using photon index=1.80, rate=0.00537, arf fullrun_pn_xmm0412990101_pi300-10000_pass1_cl_src54.arf
[Tue Jan  3 09:12:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 09:12:25 2012] Updating source flux to 1.4e-14
[Tue Jan  3 09:33:18 2012] Flag b found in src. 54 procflags, skipping spectral fitting
[Tue Jan  3 09:33:18 2012] Flag c found in src. 54 procflags, skipping spectral fitting