[Sat Dec 24 00:43:53 2011] Detection parameters:
  Position = (220.6, 333.0) = 8 49 58.98 -45 30 57.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 329.3 +/- 63.6
  Background counts = 773.4
  Rate = 0.006 +/- 0.001

[Sat Dec 24 00:44:02 2011] Off-axis axis estimate = 6.18'
[Sat Dec 24 01:08:18 2011] Using EEF radius (= 9.52 ")to estimate initial spatial extent for simple fitting
[Sat Dec 24 01:08:18 2011] Initial guess for spatial extent in simple fitting = 9.52"
[Sat Dec 24 01:08:18 2011] source mask rpix=2.2, npix_max = 28, mask sum = 8, frac = 0.277
[Sat Dec 24 01:08:18 2011] Skipping simple spatial due to low active detector fraction
[Sun Dec 25 22:24:27 2011] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 28 at 12.933827 pixels away
[Sun Dec 25 22:24:28 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 22:24:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 22:24:28 2011] Assessing source extent using major
[Sun Dec 25 22:24:28 2011] Source does appear to be extended
[Sun Dec 25 22:24:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 22:24:28 2011] Source is confused with source 45
[Sun Dec 25 22:27:09 2011] Using EEF radius (= 9.52 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 22:27:09 2011] Initial guess for spatial extent in simple fitting = 9.52"
[Sun Dec 25 22:27:09 2011] source mask rpix=2.2, npix_max = 28, mask sum = 8, frac = 0.277
[Sun Dec 25 22:27:09 2011] Skipping simple spatial due to low active detector fraction
[Thu Dec 29 13:37:57 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 13:37:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 13:37:57 2011] Assessing source extent using major
[Thu Dec 29 13:37:57 2011] Source does appear to be extended
[Thu Dec 29 13:37:57 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 13:40:16 2011] XMMSAS src. selection expression = ellipse(19139.525497, 28924.464722, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Dec 29 13:40:16 2011] Writing source region out to fullrun_pn_xmm0412990101_pi300-10000_pass1_cl_src28_src.reg
[Thu Dec 29 13:40:16 2011] Extracting stamp from image fullrun_pn_xmm0412990101_pi300-10000_cl_sm2.00.img.gz, (183, 296) - (258, 371)
[Thu Dec 29 13:40:16 2011] XMMSAS bgd. selection expression = annulus(19139.525497, 28924.464722, 1087.500000, 2175.000000, X, Y) && !ellipse(18544.862000, 26644.962000, 1501.128043, 1501.128043, 0.000000, X, Y) && !ellipse(21162.138763, 27623.306549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18045.419400, 30232.030000, 1603.016046, 1603.016046, 0.000000, X, Y) && !ellipse(17604.068954, 29707.738190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17863.075200, 29458.498000, 2045.416059, 2045.416059, 0.000000, X, Y) && !ellipse(21882.460000, 27254.422000, 639.313618, 639.313618, 0.000000, X, Y) && !ellipse(18671.559200, 28192.142000, 1753.216050, 1753.216050, 0.000000, X, Y) && !ellipse(20434.154044, 27246.868000, 1423.624041, 891.216026, 67.082000, X, Y) && !ellipse(19700.888000, 27923.920000, 553.828816, 553.828816, 0.000000, X, Y) && !ellipse(18803.596800, 27591.292000, 1107.808032, 1107.808032, 0.000000, X, Y) && !ellipse(20436.620148, 26837.274506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20539.302800, 26377.316000, 1398.960040, 1398.960040, 0.000000, X, Y) && !ellipse(22562.574000, 25903.186000, 1272.336037, 1272.336037, 0.000000, X, Y) && !ellipse(18570.094600, 26700.060000, 1505.216043, 1505.216043, 0.000000, X, Y) && !ellipse(20467.258000, 26044.768000, 1742.616050, 1742.616050, 0.000000, X, Y) && !ellipse(20929.916000, 25792.486000, 2544.672073, 341.267210, 78.799700, X, Y) && !ellipse(22104.494000, 25580.292000, 1276.528037, 1276.528037, 0.000000, X, Y) && !ellipse(29123.262000, 23124.942000, 8448.840243, 8448.840243, 0.000000, X, Y) && !ellipse(23940.594000, 22087.910000, 8044.080231, 8044.080231, 0.000000, X, Y)
[Thu Dec 29 13:40:16 2011] Writing fullrun_pn_xmm0412990101_pi300-10000_pass1_cl_src28.gif
[Thu Dec 29 17:05:38 2011] Mean detx,y = (4771.29, 5997.65) 
[Thu Dec 29 17:05:50 2011] Setting backscal keywords in source and bgd. spectrum
[Thu Dec 29 17:07:15 2011] Binned source spectrum to 10 counts/bin
[Thu Dec 29 17:07:16 2011] Setting source spectrum file to fullrun_pn_xmm0412990101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Thu Dec 29 17:07:16 2011] Setting bgd. spectrum file to fullrun_pn_xmm0412990101_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Fri Dec 30 12:47:25 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Dec 30 12:47:25 2011] rmf not generated due to insufficient counts
[Tue Jan  3 09:12:15 2012] Updating aperture counts using extracted products
[Tue Jan  3 09:12:15 2012] Error reading totcts from fullrun_pn_xmm0412990101_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Tue Jan  3 09:12:24 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 09:12:24 2012] Using photon index=1.80, rate=0.00557, arf fullrun_pn_xmm0412990101_pi300-10000_pass1_cl_src28.arf
[Tue Jan  3 09:12:24 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 09:12:24 2012] Updating source flux to 1.9e-14
[Tue Jan  3 09:33:18 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting