[Sat Dec 24 00:44:00 2011] Detection parameters:
  Position = (364.3, 238.1) = 8 48 59.45 -45 37 49.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 653.1 +/- 57.9
  Background counts = 1298.8
  Rate = 0.02 +/- 0.002

[Sat Dec 24 00:44:02 2011] Off-axis axis estimate = 6.48'
[Sat Dec 24 01:08:19 2011] Using EEF radius (= 9.67 ")to estimate initial spatial extent for simple fitting
[Sat Dec 24 01:08:19 2011] Initial guess for spatial extent in simple fitting = 9.67"
[Sat Dec 24 01:08:19 2011] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.012
[Sat Dec 24 01:08:19 2011] Giving source the simple spatial ID 92 for pass 0, mean size = 9.67"
[Sat Dec 24 19:47:41 2011] fullrun_pn_xmm0412990101_pi300-10000_cl_pass0_src92.ximg exists
[Sat Dec 24 19:47:41 2011] fullrun_pn_xmm0412990101_pi300-10000_cl_pass0_src92_1.ximg exists
[Sat Dec 24 19:47:41 2011] Fit fullrun_pn_xmm0412990101_pi300-10000_cl_pass0_src92 appears to have run properly
[Sat Dec 24 19:47:44 2011] fullrun_pn_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src92.ximg exists
[Sat Dec 24 19:47:44 2011] fullrun_pn_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src92_1.ximg exists
[Sat Dec 24 19:47:44 2011] Fit fullrun_pn_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src92 appears to have run properly
[Sun Dec 25 22:24:27 2011] Spatial fit model total counts = 18385.900000, observed total counts = 18389.000000
[Sun Dec 25 22:24:27 2011] Offset between fit and detection position for source 116 = 2.536732 pixels
[Sun Dec 25 22:24:27 2011] Warning, changing simple spatial fit ID from 92 to 4
[Sun Dec 25 22:24:27 2011] 17964.629000 total counts/ 17071.500000 bgd. counts: snr = 6.835627
Spatial fit parameters:
  Offset between fit and detection position for source 116 = 2.536732 pixels
  Position = (366.7, 237.5) = 8 48 58.42 -45 37 50.3
  Extent = 18.5 (17.9-18.8)", rotation angle = 0
  Source counts = 893.1 +/- 134.0
  Background counts = 17071.5
  Rate = 0.02 +/- 0.002
[Sun Dec 25 22:24:28 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 22:24:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 22:24:28 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 22:24:28 2011] Source does appear to be extended
[Sun Dec 25 22:24:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 22:24:28 2011] Source is confused with source 113
[Sun Dec 25 22:27:09 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec 25 22:27:09 2011] Initial guess for spatial extent in simple fitting = 18.48"
[Sun Dec 25 22:27:09 2011] source mask rpix=4.2, npix_max = 90, mask sum = 81, frac = 0.898
[Sun Dec 25 22:27:09 2011] Giving source the simple spatial ID 83 for pass 1, mean size = 18.48"
[Tue Dec 27 08:47:44 2011] fullrun_pn_xmm0412990101_pi300-10000_cl_pass1_src83.ximg exists
[Tue Dec 27 08:47:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990101_pi300-10000_cl_pass1_src83.csv
[Tue Dec 27 08:47:44 2011] fullrun_pn_xmm0412990101_pi300-10000_cl_pass1_src83_1.ximg exists
[Tue Dec 27 08:47:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990101_pi300-10000_cl_pass1_src83.csv
[Tue Dec 27 08:47:44 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990101_pi300-10000_cl_pass1_src83_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990101_pi300-10000_cl_pass1_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 27 08:47:47 2011] fullrun_pn_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src83.ximg exists
[Tue Dec 27 08:47:47 2011] fullrun_pn_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src83_1.ximg exists
[Tue Dec 27 08:47:47 2011] Fit fullrun_pn_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src83 appears to have run properly
[Thu Dec 29 13:37:57 2011] Warning, spatial fit 83 centroid is now closest to src. 106
[Thu Dec 29 13:37:58 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 13:37:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 13:37:58 2011] Assessing source extent using major axis lower bound
[Thu Dec 29 13:37:58 2011] Source does appear to be extended
[Thu Dec 29 13:37:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 13:40:31 2011] XMMSAS src. selection expression = ellipse(31858.556000, 20616.660000, 1109.100032, 1109.100032, 0.000000, X, Y)
[Thu Dec 29 13:40:31 2011] Writing source region out to fullrun_pn_xmm0412990101_pi300-10000_pass1_cl_src116_src.reg
[Thu Dec 29 13:40:31 2011] Extracting stamp from image fullrun_pn_xmm0412990101_pi300-10000_cl_sm2.00.img.gz, (303, 174) - (430, 301)
[Thu Dec 29 13:40:31 2011] XMMSAS bgd. selection expression = annulus(31858.556000, 20616.660000, 1848.500053, 3697.000106, X, Y) && !ellipse(26515.843384, 23032.381226, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(32701.963409, 19355.208130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34708.151337, 19005.415985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34564.214233, 25056.663177, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30264.723000, 22636.095000, 609.301618, 609.301618, 0.000000, X, Y) && !ellipse(27293.004000, 23153.710000, 1258.744036, 1258.744036, 0.000000, X, Y) && !ellipse(29123.262000, 23124.942000, 8448.840243, 8448.840243, 0.000000, X, Y) && !ellipse(30046.125800, 22592.582000, 1408.168041, 1408.168041, 0.000000, X, Y) && !ellipse(23940.594000, 22087.910000, 8044.080231, 8044.080231, 0.000000, X, Y) && !ellipse(29504.816600, 21941.312000, 1312.000038, 1312.000038, 0.000000, X, Y) && !ellipse(30841.998000, 21519.808000, 8531.400245, 8531.400245, 0.000000, X, Y) && !ellipse(28060.478363, 21475.089722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31063.466000, 22115.354000, 1493.224043, 1493.224043, 0.000000, X, Y) && !ellipse(27834.091980, 21866.381302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29748.960000, 20478.692200, 3097.184089, 3097.184089, 0.000000, X, Y) && !ellipse(31756.003600, 21015.392000, 1546.616045, 874.104025, 59.395500, X, Y) && !ellipse(30456.719299, 20834.966141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32681.649780, 20409.321136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30690.550000, 20401.457000, 1554.888045, 1554.888045, 0.000000, X, Y) && !ellipse(31400.215820, 20237.044250, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33266.608490, 20229.991165, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32055.508911, 20310.560684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33468.690400, 19817.882000, 1648.120047, 1648.120047, 0.000000, X, Y) && !ellipse(33826.219600, 19581.655000, 1700.976049, 713.834421, 90.000000, X, Y) && !ellipse(31892.609589, 19369.867874, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26969.476000, 19571.110000, 1487.592043, 1487.592043, 0.000000, X, Y) && !ellipse(27601.522034, 18998.137222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32121.512000, 18497.840000, 1676.248048, 1676.248048, 0.000000, X, Y) && !ellipse(35340.454529, 17634.431870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33665.552000, 18883.998000, 1608.520046, 1608.520046, 0.000000, X, Y) && !ellipse(36254.692627, 17263.261429, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Dec 29 13:40:31 2011] Writing fullrun_pn_xmm0412990101_pi300-10000_pass1_cl_src116.gif
[Fri Dec 30 01:28:22 2011] Mean detx,y = (-5465.35, -5106.92) 
[Fri Dec 30 01:28:29 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 30 01:29:23 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 30 01:29:24 2011] Setting source spectrum file to fullrun_pn_xmm0412990101_pi300-10000_pass1_cl_src116_src_b10.pi.gz
[Fri Dec 30 01:29:24 2011] Setting bgd. spectrum file to fullrun_pn_xmm0412990101_pi300-10000_pass1_cl_src116_bgd.pi.gz
[Tue Jan  3 09:12:19 2012] Updating aperture counts using extracted products
[Tue Jan  3 09:12:20 2012] Error reading totcts from fullrun_pn_xmm0412990101_pi300-10000_pass1_cl_src116_src_b10.pi.gz
[Tue Jan  3 09:12:28 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 09:12:28 2012] Using photon index=1.80, rate=0.0151, arf fullrun_pn_xmm0412990101_pi300-10000_pass1_cl_src116.arf
[Tue Jan  3 09:12:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 09:12:28 2012] Updating source flux to 5.4e-14
[Tue Jan  3 09:33:18 2012] Flag c found in src. 116 procflags, skipping spectral fitting