[Sat Dec 24 00:43:59 2011] Detection parameters:
  Position = (320.5, 251.9) = 8 49 17.61 -45 36 48.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 398.9 +/- 43.6
  Background counts = 1436.5
  Rate = 0.01 +/- 0.001

[Sat Dec 24 00:44:02 2011] Off-axis axis estimate = 3.73'
[Sat Dec 24 01:08:19 2011] Using EEF radius (= 8.30 ")to estimate initial spatial extent for simple fitting
[Sat Dec 24 01:08:19 2011] Initial guess for spatial extent in simple fitting = 8.30"
[Sat Dec 24 01:08:19 2011] source mask rpix=1.9, npix_max = 23, mask sum = 18, frac = 0.777
[Sat Dec 24 01:08:19 2011] Giving source the simple spatial ID 86 for pass 0, mean size = 8.30"
[Sat Dec 24 19:47:40 2011] fullrun_pn_xmm0412990101_pi300-10000_cl_pass0_src86.ximg exists
[Sat Dec 24 19:47:40 2011] fullrun_pn_xmm0412990101_pi300-10000_cl_pass0_src86_1.ximg exists
[Sat Dec 24 19:47:40 2011] Fit fullrun_pn_xmm0412990101_pi300-10000_cl_pass0_src86 appears to have run properly
[Sat Dec 24 19:47:44 2011] fullrun_pn_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src86.ximg exists
[Sat Dec 24 19:47:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src86.csv
[Sat Dec 24 19:47:44 2011] fullrun_pn_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src86_1.ximg exists
[Sat Dec 24 19:47:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src86.csv
[Sat Dec 24 19:47:44 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src86_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src86.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 22:24:28 2011] Warning, spatial fit 86 centroid is now closest to src. 95
[Sun Dec 25 22:24:28 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 22:24:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 22:24:28 2011] Assessing source extent using major
[Sun Dec 25 22:24:28 2011] Source does appear to be extended
[Sun Dec 25 22:24:28 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 22:24:28 2011] Source is confused with source 107
[Sun Dec 25 22:27:09 2011] Using EEF radius (= 8.30 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 22:27:09 2011] Initial guess for spatial extent in simple fitting = 8.30"
[Sun Dec 25 22:27:09 2011] source mask rpix=1.9, npix_max = 23, mask sum = 18, frac = 0.777
[Sun Dec 25 22:27:09 2011] Giving source the simple spatial ID 77 for pass 1, mean size = 8.30"
[Tue Dec 27 08:47:44 2011] fullrun_pn_xmm0412990101_pi300-10000_cl_pass1_src77.ximg exists
[Tue Dec 27 08:47:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990101_pi300-10000_cl_pass1_src77.csv
[Tue Dec 27 08:47:44 2011] fullrun_pn_xmm0412990101_pi300-10000_cl_pass1_src77_1.ximg exists
[Tue Dec 27 08:47:44 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990101_pi300-10000_cl_pass1_src77.csv
[Tue Dec 27 08:47:44 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990101_pi300-10000_cl_pass1_src77_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990101_pi300-10000_cl_pass1_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Dec 27 08:47:47 2011] fullrun_pn_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src77.ximg exists
[Tue Dec 27 08:47:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src77.csv
[Tue Dec 27 08:47:47 2011] fullrun_pn_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src77_1.ximg exists
[Tue Dec 27 08:47:47 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src77.csv
[Tue Dec 27 08:47:47 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src77_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 13:37:57 2011] Source 109 is offset by 2.271724 and 1.218291 pixels which is larger than
2 X fitted extent = 1.973168 x 1.973168, not incorporating fit results
[Thu Dec 29 13:37:57 2011] Warning, spatial fit 77 centroid is now closest to src. 107
[Thu Dec 29 13:37:58 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 13:37:58 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 13:37:58 2011] Assessing source extent using major
[Thu Dec 29 13:37:58 2011] Source does appear to be extended
[Thu Dec 29 13:37:58 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 13:40:29 2011] XMMSAS src. selection expression = ellipse(27834.091980, 21866.381302, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Dec 29 13:40:29 2011] Writing source region out to fullrun_pn_xmm0412990101_pi300-10000_pass1_cl_src109_src.reg
[Thu Dec 29 13:40:29 2011] Extracting stamp from image fullrun_pn_xmm0412990101_pi300-10000_cl_sm2.00.img.gz, (283, 214) - (358, 289)
[Thu Dec 29 13:40:29 2011] XMMSAS bgd. selection expression = annulus(27834.091980, 21866.381302, 1087.500000, 2175.000000, X, Y) && !ellipse(26515.843384, 23032.381226, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(25518.484283, 20560.863571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25799.073090, 19514.379791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26986.545563, 23122.777008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25132.615601, 21705.280762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25224.494000, 24858.928000, 1130.296033, 1130.296033, 0.000000, X, Y) && !ellipse(25502.162000, 24812.152000, 1124.248032, 1124.248032, 0.000000, X, Y) && !ellipse(26997.796900, 24091.346600, 984.560028, 984.560028, 0.000000, X, Y) && !ellipse(25959.401400, 24053.561200, 1146.984033, 1146.984033, 0.000000, X, Y) && !ellipse(30264.723000, 22636.095000, 609.301618, 609.301618, 0.000000, X, Y) && !ellipse(27293.004000, 23153.710000, 1258.744036, 1258.744036, 0.000000, X, Y) && !ellipse(29123.262000, 23124.942000, 8448.840243, 8448.840243, 0.000000, X, Y) && !ellipse(30046.125800, 22592.582000, 1408.168041, 1408.168041, 0.000000, X, Y) && !ellipse(23940.594000, 22087.910000, 8044.080231, 8044.080231, 0.000000, X, Y) && !ellipse(25318.873871, 21778.005997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26502.825560, 22035.064600, 443.268013, 443.268013, 0.000000, X, Y) && !ellipse(29504.816600, 21941.312000, 1312.000038, 1312.000038, 0.000000, X, Y) && !ellipse(30841.998000, 21519.808000, 8531.400245, 8531.400245, 0.000000, X, Y) && !ellipse(28060.478363, 21475.089722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31063.466000, 22115.354000, 1493.224043, 1493.224043, 0.000000, X, Y) && !ellipse(29748.960000, 20478.692200, 3097.184089, 3097.184089, 0.000000, X, Y) && !ellipse(30456.719299, 20834.966141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25781.222600, 21281.294200, 1355.472039, 652.045619, 69.908000, X, Y) && !ellipse(30690.550000, 20401.457000, 1554.888045, 1554.888045, 0.000000, X, Y) && !ellipse(26088.402000, 19938.566000, 1456.736042, 1456.736042, 0.000000, X, Y) && !ellipse(26969.476000, 19571.110000, 1487.592043, 1487.592043, 0.000000, X, Y) && !ellipse(27601.522034, 18998.137222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26888.420990, 18834.866196, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Dec 29 13:40:29 2011] Writing fullrun_pn_xmm0412990101_pi300-10000_pass1_cl_src109.gif
[Fri Dec 30 00:37:53 2011] Mean detx,y = (-1723.49, -2919.50) 
[Fri Dec 30 00:37:59 2011] Setting backscal keywords in source and bgd. spectrum
[Fri Dec 30 00:39:06 2011] Binned source spectrum to 10 counts/bin
[Fri Dec 30 00:39:07 2011] Setting source spectrum file to fullrun_pn_xmm0412990101_pi300-10000_pass1_cl_src109_src_b10.pi.gz
[Fri Dec 30 00:39:07 2011] Setting bgd. spectrum file to fullrun_pn_xmm0412990101_pi300-10000_pass1_cl_src109_bgd.pi.gz
[Sun Jan  1 20:43:53 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun Jan  1 20:43:53 2012] rmf not generated due to insufficient counts
[Tue Jan  3 09:12:19 2012] Updating aperture counts using extracted products
[Tue Jan  3 09:12:19 2012] Error reading totcts from fullrun_pn_xmm0412990101_pi300-10000_pass1_cl_src109_src_b10.pi.gz
[Tue Jan  3 09:12:28 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 09:12:28 2012] Using photon index=1.80, rate=0.0116, arf fullrun_pn_xmm0412990101_pi300-10000_pass1_cl_src109.arf
[Tue Jan  3 09:12:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 09:12:28 2012] Updating source flux to 6.7e-14
[Tue Jan  3 09:33:18 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting