[Sat Dec 24 00:43:52 2011] Detection parameters: Position = (227.9, 294.6) = 8 49 55.94 -45 33 33.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 1011.1 +/- 77.1 Background counts = 1062.5 Rate = 0.02 +/- 0.001 [Sat Dec 24 00:44:02 2011] Off-axis axis estimate = 5.12' [Sat Dec 24 01:08:18 2011] Using EEF radius (= 8.99 ")to estimate initial spatial extent for simple fitting [Sat Dec 24 01:08:18 2011] Initial guess for spatial extent in simple fitting = 8.99" [Sat Dec 24 01:08:18 2011] source mask rpix=2.1, npix_max = 26, mask sum = 8, frac = 0.304 [Sat Dec 24 01:08:18 2011] Skipping simple spatial due to low active detector fraction [Sun Dec 25 22:24:27 2011] Source 10 is offset by 5.079098 and -0.821631 pixels which is larger than 2 X fitted extent = 4.242120 x 4.242120, not incorporating fit results [Sun Dec 25 22:24:27 2011] Source 10 is offset by 3.028316 and 4.305450 pixels which is larger than 2 X fitted extent = 3.677825 x 3.677825, not incorporating fit results [Sun Dec 25 22:24:28 2011] Vigneting correction estimate = 1.000000 [Sun Dec 25 22:24:28 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Dec 25 22:24:28 2011] Assessing source extent using major [Sun Dec 25 22:24:28 2011] Source does appear to be extended [Sun Dec 25 22:24:28 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Dec 25 22:24:28 2011] Source is confused with source 67 [Sun Dec 25 22:24:28 2011] Source is confused with source 69 [Sun Dec 25 22:24:28 2011] Source is confused with source 71 [Sun Dec 25 22:24:28 2011] Source is confused with source 72 [Sun Dec 25 22:24:28 2011] Source is confused with source 79 [Sun Dec 25 22:27:09 2011] Using EEF radius (= 8.99 ")to estimate initial spatial extent for simple fitting [Sun Dec 25 22:27:09 2011] Initial guess for spatial extent in simple fitting = 8.99" [Sun Dec 25 22:27:09 2011] source mask rpix=2.1, npix_max = 26, mask sum = 8, frac = 0.304 [Sun Dec 25 22:27:09 2011] Skipping simple spatial due to low active detector fraction [Thu Dec 29 13:37:57 2011] Source 10 is offset by 5.079098 and -2.955102 pixels which is larger than 2 X fitted extent = 4.014800 x 4.014800, not incorporating fit results [Thu Dec 29 13:37:57 2011] Vigneting correction estimate = 1.000000 [Thu Dec 29 13:37:57 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Dec 29 13:37:57 2011] Assessing source extent using major [Thu Dec 29 13:37:57 2011] Source does appear to be extended [Thu Dec 29 13:37:57 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Dec 29 13:40:12 2011] Counts = 1011.063293, rescaling region sizes by 2.000000 [Thu Dec 29 13:40:12 2011] XMMSAS src. selection expression = ellipse(19782.901489, 25584.382111, 1305.000000, 1305.000000, 0.000000, X, Y) [Thu Dec 29 13:40:12 2011] Writing source region out to fullrun_pn_xmm0412990101_pi300-10000_pass1_cl_src10_src.reg [Thu Dec 29 13:40:12 2011] Extracting stamp from image fullrun_pn_xmm0412990101_pi300-10000_cl_sm2.00.img.gz, (153, 220) - (303, 370) [Thu Dec 29 13:40:13 2011] XMMSAS bgd. selection expression = annulus(19782.901489, 25584.382111, 4350.000000, 8700.000000, X, Y) && !ellipse(26515.843384, 23032.381226, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(20196.259018, 23894.485168, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25518.484283, 20560.863571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25799.073090, 19514.379791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23484.997345, 18349.331696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18544.862000, 26644.962000, 1501.128043, 1501.128043, 0.000000, X, Y) && !ellipse(22021.798752, 24235.736084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26986.545563, 23122.777008, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23254.034000, 23163.387580, 1225.376035, 1225.376035, 0.000000, X, Y) && !ellipse(25132.615601, 21705.280762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21162.138763, 27623.306549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28154.985800, 30389.061800, 945.328027, 945.328027, 0.000000, X, Y) && !ellipse(18045.419400, 30232.030000, 1603.016046, 1603.016046, 0.000000, X, Y) && !ellipse(17604.068954, 29707.738190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26647.512000, 29559.730000, 1251.528036, 857.096025, 90.000000, X, Y) && !ellipse(19139.525497, 28924.464722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17863.075200, 29458.498000, 2045.416059, 2045.416059, 0.000000, X, Y) && !ellipse(25950.539480, 28395.640000, 1059.288030, 1059.288030, 0.000000, X, Y) && !ellipse(24228.232000, 28289.706000, 2428.240070, 2428.240070, 0.000000, X, Y) && !ellipse(23371.224030, 28457.771637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12783.160000, 28595.374000, 1855.160053, 1855.160053, 0.000000, X, Y) && !ellipse(12341.293777, 28475.496613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25760.960000, 27956.402000, 1968.832057, 1968.832057, 0.000000, X, Y) && !ellipse(24510.590027, 27860.756439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23435.974884, 27874.326294, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21882.460000, 27254.422000, 639.313618, 639.313618, 0.000000, X, Y) && !ellipse(18671.559200, 28192.142000, 1753.216050, 1753.216050, 0.000000, X, Y) && !ellipse(14112.119995, 27958.421692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12614.459122, 28164.390900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24929.830000, 27444.852000, 1150.216033, 1150.216033, 0.000000, X, Y) && !ellipse(20434.154044, 27246.868000, 1423.624041, 891.216026, 67.082000, X, Y) && !ellipse(19700.888000, 27923.920000, 553.828816, 553.828816, 0.000000, X, Y) && !ellipse(18803.596800, 27591.292000, 1107.808032, 1107.808032, 0.000000, X, Y) && !ellipse(23895.658000, 27645.970000, 1188.544034, 1188.544034, 0.000000, X, Y) && !ellipse(24410.399841, 26998.902069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20436.620148, 26837.274506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22478.741241, 26740.206635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20539.302800, 26377.316000, 1398.960040, 1398.960040, 0.000000, X, Y) && !ellipse(24490.836609, 26152.181366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11358.113861, 26925.676361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22562.574000, 25903.186000, 1272.336037, 1272.336037, 0.000000, X, Y) && !ellipse(18570.094600, 26700.060000, 1505.216043, 1505.216043, 0.000000, X, Y) && !ellipse(23270.195660, 26260.534400, 794.612823, 794.612823, 0.000000, X, Y) && !ellipse(20467.258000, 26044.768000, 1742.616050, 1742.616050, 0.000000, X, Y) && !ellipse(20929.916000, 25792.486000, 2544.672073, 341.267210, 78.799700, X, Y) && !ellipse(20258.552643, 25647.999268, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23310.492889, 25186.674652, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24633.101044, 25088.629730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23777.910797, 25101.235809, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20772.972000, 24868.364000, 1469.816042, 1469.816042, 0.000000, X, Y) && !ellipse(25224.494000, 24858.928000, 1130.296033, 1130.296033, 0.000000, X, Y) && !ellipse(22104.494000, 25580.292000, 1276.528037, 1276.528037, 0.000000, X, Y) && !ellipse(23381.156494, 24499.335358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25502.162000, 24812.152000, 1124.248032, 1124.248032, 0.000000, X, Y) && !ellipse(24035.568115, 24485.428314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26997.796900, 24091.346600, 984.560028, 984.560028, 0.000000, X, Y) && !ellipse(18025.640000, 23852.490000, 1545.384044, 1545.384044, 0.000000, X, Y) && !ellipse(25959.401400, 24053.561200, 1146.984033, 1146.984033, 0.000000, X, Y) && !ellipse(19736.344000, 23643.876000, 1480.088043, 1480.088043, 0.000000, X, Y) && !ellipse(22876.226600, 23202.380000, 1146.984033, 1146.984033, 0.000000, X, Y) && !ellipse(23941.140000, 23276.204000, 1226.496035, 1226.496035, 0.000000, X, Y) && !ellipse(27293.004000, 23153.710000, 1258.744036, 1258.744036, 0.000000, X, Y) && !ellipse(29123.262000, 23124.942000, 8448.840243, 8448.840243, 0.000000, X, Y) && !ellipse(23940.594000, 22087.910000, 8044.080231, 8044.080231, 0.000000, X, Y) && !ellipse(25318.873871, 21778.005997, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26502.825560, 22035.064600, 443.268013, 443.268013, 0.000000, X, Y) && !ellipse(29504.816600, 21941.312000, 1312.000038, 1312.000038, 0.000000, X, Y) && !ellipse(30841.998000, 21519.808000, 8531.400245, 8531.400245, 0.000000, X, Y) && !ellipse(28060.478363, 21475.089722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27834.091980, 21866.381302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29748.960000, 20478.692200, 3097.184089, 3097.184089, 0.000000, X, Y) && !ellipse(23740.066000, 21217.808000, 1340.680039, 1340.680039, 0.000000, X, Y) && !ellipse(24938.762000, 21224.189800, 622.038418, 622.038418, 0.000000, X, Y) && !ellipse(25781.222600, 21281.294200, 1355.472039, 652.045619, 69.908000, X, Y) && !ellipse(26088.402000, 19938.566000, 1456.736042, 1456.736042, 0.000000, X, Y) && !ellipse(23615.383800, 20196.516000, 1473.679283, 1473.679283, 0.000000, X, Y) && !ellipse(22141.820000, 19570.110000, 1780.568051, 1780.568051, 0.000000, X, Y) && !ellipse(26969.476000, 19571.110000, 1487.592043, 1487.592043, 0.000000, X, Y) && !ellipse(27601.522034, 18998.137222, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26888.420990, 18834.866196, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14283.272476, 18280.784149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22176.086487, 17975.688095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22615.488525, 16301.296524, 870.000000, 870.000000, 0.000000, X, Y) [Thu Dec 29 13:40:13 2011] Writing fullrun_pn_xmm0412990101_pi300-10000_pass1_cl_src10.gif [Thu Dec 29 15:06:44 2011] Mean detx,y = (4954.19, 2597.69) [Thu Dec 29 15:07:01 2011] Setting backscal keywords in source and bgd. spectrum [Thu Dec 29 15:11:38 2011] Binned source spectrum to 10 counts/bin [Thu Dec 29 15:11:39 2011] Setting source spectrum file to fullrun_pn_xmm0412990101_pi300-10000_pass1_cl_src10_src_b10.pi.gz [Thu Dec 29 15:11:39 2011] Setting bgd. spectrum file to fullrun_pn_xmm0412990101_pi300-10000_pass1_cl_src10_bgd.pi.gz [Fri Dec 30 05:06:02 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done [Fri Dec 30 05:06:02 2011] rmf not generated due to insufficient counts [Tue Jan 3 09:12:14 2012] Updating aperture counts using extracted products [Tue Jan 3 09:12:14 2012] Error reading totcts from fullrun_pn_xmm0412990101_pi300-10000_pass1_cl_src10_src_b10.pi.gz [Tue Jan 3 09:12:22 2012] Calculating source flux in energy range 0.30-8.00 [Tue Jan 3 09:12:22 2012] Using photon index=1.80, rate=0.0171, arf fullrun_pn_xmm0412990101_pi300-10000_pass1_cl_src10.arf [Tue Jan 3 09:12:22 2012] Assuming count rate is from the 0.30-10.00 bandpass [Tue Jan 3 09:12:22 2012] Updating source flux to 4.4e-14 [Tue Jan 3 09:33:18 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting