[Sat Dec 24 00:47:15 2011] Detection parameters:
  Position = (259.8, 299.1) = 8 49 42.76 -45 33 18.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 185.2 +/- 31.0
  Background counts = 345.9
  Rate = 0.003 +/- 0.0005

[Sat Dec 24 00:47:16 2011] Off-axis axis estimate = 2.80'
[Sun Dec 25 08:14:19 2011] Using EEF radius (= 7.83 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 08:14:19 2011] Initial guess for spatial extent in simple fitting = 7.83"
[Sun Dec 25 08:14:19 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.945
[Sun Dec 25 08:14:19 2011] Giving source the simple spatial ID 48 for pass 0, mean size = 7.83"
[Sun Dec 25 22:23:14 2011] fullrun_mos2_xmm0412990101_pi300-10000_cl_pass0_src48.ximg exists
[Sun Dec 25 22:23:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990101_pi300-10000_cl_pass0_src48.csv
[Sun Dec 25 22:23:14 2011] fullrun_mos2_xmm0412990101_pi300-10000_cl_pass0_src48_1.ximg exists
[Sun Dec 25 22:23:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990101_pi300-10000_cl_pass0_src48.csv
[Sun Dec 25 22:23:14 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990101_pi300-10000_cl_pass0_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990101_pi300-10000_cl_pass0_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 22:23:19 2011] fullrun_mos2_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src48.ximg exists
[Sun Dec 25 22:23:19 2011] fullrun_mos2_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src48_1.ximg exists
[Sun Dec 25 22:23:19 2011] Fit fullrun_mos2_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src48 appears to have run properly
[Sun Dec 25 22:25:59 2011] Spatial fit model total counts = 4655.180000, observed total counts = 4643.000000
[Sun Dec 25 22:25:59 2011] Offset between fit and detection position for source 81 = 8.766094 pixels
[Sun Dec 25 22:25:59 2011] 4667.655000 total counts/ 4464.570000 bgd. counts: snr = 3.039401
Spatial fit parameters:
  Offset between fit and detection position for source 81 = 8.766094 pixels
  Position = (252.8, 304.4) = 8 49 45.65 -45 32 59.6
  Extent = 15.6 (15.5-15.7)", rotation angle = 0
  Source counts = 203.1 +/- 68.3
  Background counts = 4464.6
  Rate = 0.003 +/- 0.001
[Sun Dec 25 22:25:59 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 22:25:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 22:25:59 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 22:25:59 2011] Source does appear to be extended
[Sun Dec 25 22:25:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 22:25:59 2011] Source is confused with source 28
[Wed Dec 28 17:43:59 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Dec 28 17:43:59 2011] Initial guess for spatial extent in simple fitting = 15.62"
[Wed Dec 28 17:43:59 2011] source mask rpix=3.6, npix_max = 66, mask sum = 64, frac = 0.956
[Wed Dec 28 17:43:59 2011] Giving source the simple spatial ID 44 for pass 1, mean size = 15.62"
[Thu Dec 29 13:37:03 2011] fullrun_mos2_xmm0412990101_pi300-10000_cl_pass1_src44.ximg exists
[Thu Dec 29 13:37:03 2011] fullrun_mos2_xmm0412990101_pi300-10000_cl_pass1_src44_1.ximg exists
[Thu Dec 29 13:37:03 2011] Fit fullrun_mos2_xmm0412990101_pi300-10000_cl_pass1_src44 appears to have run properly
[Thu Dec 29 13:37:06 2011] fullrun_mos2_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Thu Dec 29 13:37:06 2011] fullrun_mos2_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Thu Dec 29 13:37:06 2011] Fit fullrun_mos2_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src44 appears to have run properly
[Thu Dec 29 13:39:16 2011] Spatial fit model total counts = 7488.820000, observed total counts = 7484.000000
[Thu Dec 29 13:39:16 2011] Offset between fit and detection position for source 81 = 2.500985 pixels
[Thu Dec 29 13:39:16 2011] Warning, changing simple spatial fit ID from 44 to 36
[Thu Dec 29 13:39:16 2011] 7018.303000 total counts/ 6062.990000 bgd. counts: snr = 12.268805
Spatial fit parameters:
  Offset between fit and detection position for source 81 = 2.500985 pixels
  Position = (255.3, 304.6) = 8 49 44.62 -45 32 58.7
  Extent = 32.2 (32.1-32.3)", rotation angle = 0
  Source counts = 955.3 +/- 83.8
  Background counts = 6063.0
  Rate = 0.02 +/- 0.001
[Thu Dec 29 13:39:17 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 13:39:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 13:39:17 2011] Assessing source extent using major axis lower bound
[Thu Dec 29 13:39:17 2011] Source does appear to be extended
[Thu Dec 29 13:39:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan  2 23:10:48 2012] XMMSAS src. selection expression = ellipse(22161.948000, 26451.502000, 1932.258056, 1932.258056, 0.000000, X, Y)
[Mon Jan  2 23:10:48 2012] Writing source region out to fullrun_mos2_xmm0412990101_pi300-10000_pass1_cl_src81_src.reg
[Mon Jan  2 23:10:48 2012] Extracting stamp from image fullrun_mos2_xmm0412990101_pi300-10000_cl_sm2.00.img.gz, (144, 194) - (366, 416)
[Mon Jan  2 23:10:48 2012] XMMSAS bgd. selection expression = annulus(22161.948000, 26451.502000, 3220.430093, 6440.860185, X, Y) && !ellipse(19695.685460, 27936.891400, 310.906409, 221.255206, 83.182850, X, Y) && !ellipse(31311.982000, 21611.995400, 2966.864085, 1285.312037, 228.961000, X, Y) && !ellipse(25078.240601, 21443.825424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31332.860000, 20655.282000, 3269.456094, 3269.456094, 0.000000, X, Y) && !ellipse(28531.913330, 22918.090179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26825.321564, 19784.709564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21519.389600, 26703.810400, 1331.608038, 1331.608038, 0.000000, X, Y) && !ellipse(29086.787903, 23087.860718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28636.320000, 23301.197800, 1311.824038, 1311.824038, 0.000000, X, Y) && !ellipse(27455.010000, 23877.832000, 2522.768073, 2522.768073, 0.000000, X, Y) && !ellipse(25680.097000, 21369.824800, 1008.592029, 1008.592029, 0.000000, X, Y) && !ellipse(18884.320000, 28906.913940, 1517.864044, 1517.864044, 0.000000, X, Y) && !ellipse(21729.216000, 26862.168000, 1290.504037, 1290.504037, 0.000000, X, Y) && !ellipse(23377.797882, 26055.493164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25466.413400, 24421.246800, 1137.608033, 1137.608033, 0.000000, X, Y) && !ellipse(20961.014000, 26934.260000, 1399.768040, 1399.768040, 0.000000, X, Y) && !ellipse(28616.452000, 22136.562000, 1311.752038, 1311.752038, 0.000000, X, Y) && !ellipse(18538.643600, 27150.190000, 764.396022, 764.396022, 0.000000, X, Y) && !ellipse(17940.422600, 27366.162960, 1238.736036, 470.125614, 90.000000, X, Y) && !ellipse(23393.003800, 26535.944000, 1196.832034, 1196.832034, 0.000000, X, Y) && !ellipse(20132.026000, 26148.524000, 1384.520040, 1384.520040, 0.000000, X, Y) && !ellipse(21965.334244, 27475.639130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20055.612000, 27416.758000, 937.600027, 937.600027, 0.000000, X, Y) && !ellipse(20537.559052, 27357.620422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19532.248000, 28376.240000, 2566.712074, 2566.712074, 0.000000, X, Y) && !ellipse(19141.616000, 26712.878000, 1461.240042, 1461.240042, 0.000000, X, Y) && !ellipse(22625.423645, 26914.517273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11892.830000, 29476.208000, 3837.472110, 3837.472110, 0.000000, X, Y)
[Mon Jan  2 23:10:48 2012] Writing fullrun_mos2_xmm0412990101_pi300-10000_pass1_cl_src81.gif
[Tue Jan  3 01:02:22 2012] Mean detx,y = (-2343.65, -2892.45) 
[Tue Jan  3 01:02:25 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan  3 01:03:42 2012] Binned source spectrum to 10 counts/bin
[Tue Jan  3 01:03:43 2012] Setting source spectrum file to fullrun_mos2_xmm0412990101_pi300-10000_pass1_cl_src81_src_b10.pi.gz
[Tue Jan  3 01:03:43 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412990101_pi300-10000_pass1_cl_src81_bgd.pi.gz
[Tue Jan  3 09:12:43 2012] Updating aperture counts using extracted products
[Tue Jan  3 09:12:43 2012] Error reading totcts from fullrun_mos2_xmm0412990101_pi300-10000_pass1_cl_src81_src_b10.pi.gz
[Tue Jan  3 09:12:48 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 09:12:48 2012] Using photon index=1.80, rate=0.0157, arf fullrun_mos2_xmm0412990101_pi300-10000_pass1_cl_src81.arf
[Tue Jan  3 09:12:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 09:12:48 2012] Updating source flux to 1.4e-13
[Tue Jan  3 09:23:05 2012] Flag c found in src. 81 procflags, skipping spectral fitting