[Sat Dec 24 00:47:12 2011] Detection parameters:
  Position = (413.7, 206.0) = 8 48 38.93 -45 40 5.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 113.8 +/- 24.1
  Background counts = 184.4
  Rate = 0.002 +/- 0.0004

[Sat Dec 24 00:47:16 2011] Off-axis axis estimate = 10.71'
[Sun Dec 25 08:14:19 2011] Using EEF radius (= 11.78 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 08:14:19 2011] Initial guess for spatial extent in simple fitting = 11.78"
[Sun Dec 25 08:14:19 2011] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.020
[Sun Dec 25 08:14:19 2011] Giving source the simple spatial ID 83 for pass 0, mean size = 11.78"
[Sun Dec 25 22:23:16 2011] fullrun_mos2_xmm0412990101_pi300-10000_cl_pass0_src83.ximg exists
[Sun Dec 25 22:23:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990101_pi300-10000_cl_pass0_src83.csv
[Sun Dec 25 22:23:16 2011] fullrun_mos2_xmm0412990101_pi300-10000_cl_pass0_src83_1.ximg exists
[Sun Dec 25 22:23:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990101_pi300-10000_cl_pass0_src83.csv
[Sun Dec 25 22:23:16 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990101_pi300-10000_cl_pass0_src83_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990101_pi300-10000_cl_pass0_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 22:23:22 2011] fullrun_mos2_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src83.ximg exists
[Sun Dec 25 22:23:22 2011] fullrun_mos2_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src83_1.ximg exists
[Sun Dec 25 22:23:22 2011] Fit fullrun_mos2_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src83 appears to have run properly
[Sun Dec 25 22:25:59 2011] Spatial fit model total counts = 2765.360000, observed total counts = 2759.000000
[Sun Dec 25 22:25:59 2011] Offset between fit and detection position for source 54 = 3.564387 pixels
[Sun Dec 25 22:25:59 2011] Warning, changing simple spatial fit ID from 83 to 45
[Sun Dec 25 22:25:59 2011] 2671.929000 total counts/ 1785.830000 bgd. counts: snr = 20.968250
Spatial fit parameters:
  Offset between fit and detection position for source 54 = 3.564387 pixels
  Position = (416.2, 203.5) = 8 48 37.89 -45 40 18.1
  Extent = 24.3 (24.1-48.7)", rotation angle = 0
  Source counts = 886.1 +/- 51.7
  Background counts = 1785.8
  Rate = 0.01 +/- 0.0009
[Sun Dec 25 22:25:59 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 22:25:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 22:25:59 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 22:25:59 2011] Source does appear to be extended
[Sun Dec 25 22:25:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 22:25:59 2011] Source is confused with source 19
[Wed Dec 28 17:43:59 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Dec 28 17:43:59 2011] Initial guess for spatial extent in simple fitting = 24.34"
[Wed Dec 28 17:43:59 2011] source mask rpix=5.6, npix_max = 148, mask sum = 156, frac = 1.050
[Wed Dec 28 17:43:59 2011] Giving source the simple spatial ID 76 for pass 1, mean size = 24.34"
[Thu Dec 29 13:37:04 2011] fullrun_mos2_xmm0412990101_pi300-10000_cl_pass1_src76.ximg exists
[Thu Dec 29 13:37:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990101_pi300-10000_cl_pass1_src76.csv
[Thu Dec 29 13:37:04 2011] fullrun_mos2_xmm0412990101_pi300-10000_cl_pass1_src76_1.ximg exists
[Thu Dec 29 13:37:04 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990101_pi300-10000_cl_pass1_src76.csv
[Thu Dec 29 13:37:04 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990101_pi300-10000_cl_pass1_src76_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990101_pi300-10000_cl_pass1_src76.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 13:37:07 2011] fullrun_mos2_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src76.ximg exists
[Thu Dec 29 13:37:07 2011] fullrun_mos2_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src76_1.ximg exists
[Thu Dec 29 13:37:07 2011] Fit fullrun_mos2_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src76 appears to have run properly
[Thu Dec 29 13:39:17 2011] Warning, spatial fit 76 centroid is now closest to src. 61
[Thu Dec 29 13:39:17 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 13:39:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 13:39:17 2011] Assessing source extent using major axis lower bound
[Thu Dec 29 13:39:17 2011] Source does appear to be extended
[Thu Dec 29 13:39:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan  2 23:10:50 2012] XMMSAS src. selection expression = ellipse(36158.768000, 17652.882000, 1460.526042, 1460.526042, 0.000000, X, Y)
[Mon Jan  2 23:10:50 2012] Writing source region out to fullrun_mos2_xmm0412990101_pi300-10000_pass1_cl_src54_src.reg
[Mon Jan  2 23:10:50 2012] Extracting stamp from image fullrun_mos2_xmm0412990101_pi300-10000_cl_sm2.00.img.gz, (332, 120) - (500, 287)
[Mon Jan  2 23:10:50 2012] XMMSAS bgd. selection expression = annulus(36158.768000, 17652.882000, 2434.210070, 4868.420140, X, Y) && !ellipse(32142.142000, 19978.411000, 1634.728047, 1634.728047, 0.000000, X, Y) && !ellipse(31696.322000, 21393.712000, 1483.432043, 1483.432043, 0.000000, X, Y) && !ellipse(31311.982000, 21611.995400, 2966.864085, 1285.312037, 228.961000, X, Y) && !ellipse(32347.548859, 20831.500000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30533.547600, 22421.717400, 1193.152034, 1193.152034, 0.000000, X, Y) && !ellipse(32380.013432, 19602.482944, 1289.540239, 502.714159, 359.139175, X, Y) && !ellipse(31332.860000, 20655.282000, 3269.456094, 3269.456094, 0.000000, X, Y) && !ellipse(30153.788000, 22390.773200, 1381.040040, 1381.040040, 0.000000, X, Y) && !ellipse(32601.709503, 20483.500000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32160.844543, 21179.500000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33911.258000, 18943.475400, 1329.888038, 1329.888038, 0.000000, X, Y) && !ellipse(33352.148224, 19839.818680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33808.271000, 18418.296000, 1084.480031, 376.260011, 329.754500, X, Y) && !ellipse(33169.992000, 20641.706200, 1602.880046, 421.103212, 90.000000, X, Y) && !ellipse(33344.210000, 18474.100000, 3691.248106, 3691.248106, 0.000000, X, Y) && !ellipse(34115.202000, 18078.756000, 1845.624053, 1845.624053, 0.000000, X, Y) && !ellipse(34435.732000, 19196.254000, 702.964020, 702.964020, 0.000000, X, Y) && !ellipse(34105.369415, 19938.774277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38070.804352, 15160.638855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37075.101990, 16568.288925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34647.858000, 19350.970000, 1757.808051, 705.368820, 341.764900, X, Y) && !ellipse(34890.788000, 18020.582000, 3987.760115, 3987.760115, 0.000000, X, Y) && !ellipse(37515.692000, 15918.388000, 3998.080115, 3998.080115, 0.000000, X, Y) && !ellipse(35577.270634, 18614.776000, 1540.496044, 1540.496044, 0.000000, X, Y) && !ellipse(37768.162872, 15774.781647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36752.402000, 16565.668000, 2991.192086, 2991.192086, 0.000000, X, Y) && !ellipse(33546.390167, 17826.382523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34857.440979, 18735.907944, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36350.170000, 16832.382000, 1993.880057, 1993.880057, 0.000000, X, Y) && !ellipse(38138.102000, 14409.086000, 3461.832100, 3461.832100, 0.000000, X, Y)
[Mon Jan  2 23:10:50 2012] Writing fullrun_mos2_xmm0412990101_pi300-10000_pass1_cl_src54.gif
[Tue Jan  3 02:17:24 2012] Mean detx,y = (9051.40, 8801.71) 
[Tue Jan  3 02:17:27 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan  3 02:17:56 2012] Binned source spectrum to 10 counts/bin
[Tue Jan  3 02:17:56 2012] Setting source spectrum file to fullrun_mos2_xmm0412990101_pi300-10000_pass1_cl_src54_src_b10.pi.gz
[Tue Jan  3 02:17:56 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412990101_pi300-10000_pass1_cl_src54_bgd.pi.gz
[Tue Jan  3 09:12:45 2012] Updating aperture counts using extracted products
[Tue Jan  3 09:12:46 2012] Error reading totcts from fullrun_mos2_xmm0412990101_pi300-10000_pass1_cl_src54_src_b10.pi.gz
[Tue Jan  3 09:12:50 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 09:12:50 2012] Using photon index=1.80, rate=0.0146, arf fullrun_mos2_xmm0412990101_pi300-10000_pass1_cl_src54.arf
[Tue Jan  3 09:12:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 09:12:50 2012] Updating source flux to 3e-13
[Tue Jan  3 09:23:05 2012] Flag c found in src. 54 procflags, skipping spectral fitting