[Sat Dec 24 00:47:12 2011] Detection parameters:
  Position = (384.7, 211.9) = 8 48 50.95 -45 39 44.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 210.2 +/- 28.9
  Background counts = 257.4
  Rate = 0.003 +/- 0.0005

[Sat Dec 24 00:47:16 2011] Off-axis axis estimate = 8.86'
[Sun Dec 25 08:14:19 2011] Using EEF radius (= 10.86 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 08:14:19 2011] Initial guess for spatial extent in simple fitting = 10.86"
[Sun Dec 25 08:14:19 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.002
[Sun Dec 25 08:14:19 2011] Giving source the simple spatial ID 42 for pass 0, mean size = 10.86"
[Sun Dec 25 22:23:13 2011] fullrun_mos2_xmm0412990101_pi300-10000_cl_pass0_src42.ximg exists
[Sun Dec 25 22:23:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990101_pi300-10000_cl_pass0_src42.csv
[Sun Dec 25 22:23:14 2011] fullrun_mos2_xmm0412990101_pi300-10000_cl_pass0_src42_1.ximg exists
[Sun Dec 25 22:23:14 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990101_pi300-10000_cl_pass0_src42.csv
[Sun Dec 25 22:23:14 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990101_pi300-10000_cl_pass0_src42_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990101_pi300-10000_cl_pass0_src42.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 22:23:19 2011] fullrun_mos2_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src42.ximg exists
[Sun Dec 25 22:23:19 2011] fullrun_mos2_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src42_1.ximg exists
[Sun Dec 25 22:23:19 2011] Fit fullrun_mos2_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src42 appears to have run properly
[Sun Dec 25 22:25:59 2011] Warning, spatial fit 42 centroid is now closest to src. 17
[Sun Dec 25 22:25:59 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 22:25:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 22:25:59 2011] Assessing source extent using major
[Sun Dec 25 22:25:59 2011] Source does appear to be extended
[Sun Dec 25 22:25:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 22:25:59 2011] Source is confused with source 18
[Sun Dec 25 22:25:59 2011] Source is confused with source 57
[Sun Dec 25 22:25:59 2011] Source is confused with source 55
[Wed Dec 28 17:43:59 2011] Using EEF radius (= 10.86 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 17:43:59 2011] Initial guess for spatial extent in simple fitting = 10.86"
[Wed Dec 28 17:43:59 2011] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.002
[Wed Dec 28 17:43:59 2011] Giving source the simple spatial ID 38 for pass 1, mean size = 10.86"
[Thu Dec 29 13:37:03 2011] fullrun_mos2_xmm0412990101_pi300-10000_cl_pass1_src38.ximg exists
[Thu Dec 29 13:37:03 2011] fullrun_mos2_xmm0412990101_pi300-10000_cl_pass1_src38_1.ximg exists
[Thu Dec 29 13:37:03 2011] Fit fullrun_mos2_xmm0412990101_pi300-10000_cl_pass1_src38 appears to have run properly
[Thu Dec 29 13:37:05 2011] fullrun_mos2_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src38.ximg exists
[Thu Dec 29 13:37:06 2011] fullrun_mos2_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src38_1.ximg exists
[Thu Dec 29 13:37:06 2011] Fit fullrun_mos2_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src38 appears to have run properly
[Thu Dec 29 13:39:16 2011] Warning, spatial fit 38 centroid is now closest to src. 47
[Thu Dec 29 13:39:16 2011] Spatial fit model total counts = 13210.100000, observed total counts = 13201.000000
[Thu Dec 29 13:39:16 2011] Offset between fit and detection position for source 50 = 1.367273 pixels
[Thu Dec 29 13:39:16 2011] Warning, changing simple spatial fit ID from 38 to 40
[Thu Dec 29 13:39:16 2011] 13187.920000 total counts/ 7612.030000 bgd. counts: snr = 63.909284
Spatial fit parameters:
  Offset between fit and detection position for source 50 = 1.367273 pixels
  Position = (383.8, 212.9) = 8 48 51.32 -45 39 37.3
  Extent = 46.1 (44.2-92.3)", rotation angle = 0
  Source counts = 5575.9 +/- 114.8
  Background counts = 7612.0
  Rate = 0.09 +/- 0.002
[Thu Dec 29 13:39:17 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 13:39:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 13:39:17 2011] Assessing source extent using major axis lower bound
[Thu Dec 29 13:39:17 2011] Source does appear to be extended
[Thu Dec 29 13:39:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan  2 23:10:48 2012] Counts = 5575.890000, rescaling region sizes by 2.000000
[Mon Jan  2 23:10:48 2012] XMMSAS src. selection expression = ellipse(33344.210000, 18474.100000, 5536.872159, 5536.872159, 0.000000, X, Y)
[Mon Jan  2 23:10:48 2012] Writing source region out to fullrun_mos2_xmm0412990101_pi300-10000_pass1_cl_src50_src.reg
[Mon Jan  2 23:10:48 2012] Extracting stamp from image fullrun_mos2_xmm0412990101_pi300-10000_cl_sm2.00.img.gz, (66, 0) - (595, 531)
[Mon Jan  2 23:10:48 2012] XMMSAS bgd. selection expression = annulus(33344.210000, 18474.100000, 18456.240531, 36912.481062, X, Y) && !ellipse(18386.391922, 15992.484756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19695.685460, 27936.891400, 310.906409, 221.255206, 83.182850, X, Y) && !ellipse(32142.142000, 19978.411000, 1634.728047, 1634.728047, 0.000000, X, Y) && !ellipse(31696.322000, 21393.712000, 1483.432043, 1483.432043, 0.000000, X, Y) && !ellipse(31311.982000, 21611.995400, 2966.864085, 1285.312037, 228.961000, X, Y) && !ellipse(32347.548859, 20831.500000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25078.240601, 21443.825424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30533.547600, 22421.717400, 1193.152034, 1193.152034, 0.000000, X, Y) && !ellipse(32380.013432, 19602.482944, 1289.540239, 502.714159, 359.139175, X, Y) && !ellipse(31332.860000, 20655.282000, 3269.456094, 3269.456094, 0.000000, X, Y) && !ellipse(30153.788000, 22390.773200, 1381.040040, 1381.040040, 0.000000, X, Y) && !ellipse(30134.595215, 21705.483871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28531.913330, 22918.090179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26825.321564, 19784.709564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11336.758133, 26909.568298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32601.709503, 20483.500000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32160.844543, 21179.500000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33911.258000, 18943.475400, 1329.888038, 1329.888038, 0.000000, X, Y) && !ellipse(33352.148224, 19839.818680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22623.644775, 16279.721756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33808.271000, 18418.296000, 1084.480031, 376.260011, 329.754500, X, Y) && !ellipse(12893.081600, 28998.418000, 1898.528055, 1898.528055, 0.000000, X, Y) && !ellipse(12765.161000, 28756.438000, 1601.312046, 1601.312046, 0.000000, X, Y) && !ellipse(30021.461761, 22055.970306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21519.389600, 26703.810400, 1331.608038, 1331.608038, 0.000000, X, Y) && !ellipse(29086.787903, 23087.860718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33169.992000, 20641.706200, 1602.880046, 421.103212, 90.000000, X, Y) && !ellipse(22607.449097, 18147.638412, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(26368.414000, 14127.040200, 1815.104052, 1815.104052, 0.000000, X, Y) && !ellipse(28636.320000, 23301.197800, 1311.824038, 1311.824038, 0.000000, X, Y) && !ellipse(27455.010000, 23877.832000, 2522.768073, 2522.768073, 0.000000, X, Y) && !ellipse(25680.097000, 21369.824800, 1008.592029, 1008.592029, 0.000000, X, Y) && !ellipse(18884.320000, 28906.913940, 1517.864044, 1517.864044, 0.000000, X, Y) && !ellipse(21729.216000, 26862.168000, 1290.504037, 1290.504037, 0.000000, X, Y) && !ellipse(31345.009796, 10884.148651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34115.202000, 18078.756000, 1845.624053, 1845.624053, 0.000000, X, Y) && !ellipse(23377.797882, 26055.493164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22161.948000, 26451.502000, 2576.344074, 2576.344074, 0.000000, X, Y) && !ellipse(14252.532547, 18304.082031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34435.732000, 19196.254000, 702.964020, 702.964020, 0.000000, X, Y) && !ellipse(34105.369415, 19938.774277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25466.413400, 24421.246800, 1137.608033, 1137.608033, 0.000000, X, Y) && !ellipse(38070.804352, 15160.638855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20961.014000, 26934.260000, 1399.768040, 1399.768040, 0.000000, X, Y) && !ellipse(37075.101990, 16568.288925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28616.452000, 22136.562000, 1311.752038, 1311.752038, 0.000000, X, Y) && !ellipse(18538.643600, 27150.190000, 764.396022, 764.396022, 0.000000, X, Y) && !ellipse(34647.858000, 19350.970000, 1757.808051, 705.368820, 341.764900, X, Y) && !ellipse(34890.788000, 18020.582000, 3987.760115, 3987.760115, 0.000000, X, Y) && !ellipse(37515.692000, 15918.388000, 3998.080115, 3998.080115, 0.000000, X, Y) && !ellipse(11649.166800, 28462.872000, 3944.832114, 3944.832114, 0.000000, X, Y) && !ellipse(17940.422600, 27366.162960, 1238.736036, 470.125614, 90.000000, X, Y) && !ellipse(35577.270634, 18614.776000, 1540.496044, 1540.496044, 0.000000, X, Y) && !ellipse(23393.003800, 26535.944000, 1196.832034, 1196.832034, 0.000000, X, Y) && !ellipse(20132.026000, 26148.524000, 1384.520040, 1384.520040, 0.000000, X, Y) && !ellipse(37768.162872, 15774.781647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21965.334244, 27475.639130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20055.612000, 27416.758000, 937.600027, 937.600027, 0.000000, X, Y) && !ellipse(36752.402000, 16565.668000, 2991.192086, 2991.192086, 0.000000, X, Y) && !ellipse(33546.390167, 17826.382523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20537.559052, 27357.620422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19532.248000, 28376.240000, 2566.712074, 2566.712074, 0.000000, X, Y) && !ellipse(19141.616000, 26712.878000, 1461.240042, 1461.240042, 0.000000, X, Y) && !ellipse(22625.423645, 26914.517273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34857.440979, 18735.907944, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36350.170000, 16832.382000, 1993.880057, 1993.880057, 0.000000, X, Y) && !ellipse(36158.768000, 17652.882000, 1947.368056, 1947.368056, 0.000000, X, Y) && !ellipse(38138.102000, 14409.086000, 3461.832100, 3461.832100, 0.000000, X, Y) && !ellipse(11892.830000, 29476.208000, 3837.472110, 3837.472110, 0.000000, X, Y)
[Mon Jan  2 23:10:48 2012] Writing fullrun_mos2_xmm0412990101_pi300-10000_pass1_cl_src50.gif
[Tue Jan  3 00:46:42 2012] Mean detx,y = (6078.24, 6897.69) 
[Tue Jan  3 00:46:46 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan  3 01:00:11 2012] Binned source spectrum to 10 counts/bin
[Tue Jan  3 01:00:12 2012] Setting source spectrum file to fullrun_mos2_xmm0412990101_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Tue Jan  3 01:00:12 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412990101_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Tue Jan  3 09:12:43 2012] Updating aperture counts using extracted products
[Tue Jan  3 09:12:43 2012] Error reading totcts from fullrun_mos2_xmm0412990101_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Tue Jan  3 09:12:48 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 09:12:48 2012] Using photon index=1.80, rate=0.0919, arf fullrun_mos2_xmm0412990101_pi300-10000_pass1_cl_src50.arf
[Tue Jan  3 09:12:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 09:12:48 2012] Updating source flux to 1.4e-12
[Tue Jan  3 09:23:05 2012] Flag c found in src. 50 procflags, skipping spectral fitting