[Sat Dec 24 00:47:12 2011] Detection parameters:
  Position = (307.2, 163.1) = 8 49 23.09 -45 43 16.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 126.8 +/- 23.9
  Background counts = 203.0
  Rate = 0.004 +/- 0.0008

[Sat Dec 24 00:47:16 2011] Off-axis axis estimate = 9.83'
[Sun Dec 25 08:14:19 2011] Using EEF radius (= 11.34 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 08:14:19 2011] Initial guess for spatial extent in simple fitting = 11.34"
[Sun Dec 25 08:14:19 2011] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.932
[Sun Dec 25 08:14:19 2011] Giving source the simple spatial ID 33 for pass 0, mean size = 11.34"
[Sun Dec 25 22:23:13 2011] fullrun_mos2_xmm0412990101_pi300-10000_cl_pass0_src33.ximg exists
[Sun Dec 25 22:23:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990101_pi300-10000_cl_pass0_src33.csv
[Sun Dec 25 22:23:13 2011] fullrun_mos2_xmm0412990101_pi300-10000_cl_pass0_src33_1.ximg exists
[Sun Dec 25 22:23:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990101_pi300-10000_cl_pass0_src33.csv
[Sun Dec 25 22:23:13 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990101_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990101_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 22:23:19 2011] fullrun_mos2_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Sun Dec 25 22:23:19 2011] fullrun_mos2_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Sun Dec 25 22:23:19 2011] Fit fullrun_mos2_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Sun Dec 25 22:25:59 2011] Warning: source 33 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 44 at 10.579427 pixels away
[Sun Dec 25 22:25:59 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 22:25:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 22:25:59 2011] Assessing source extent using major
[Sun Dec 25 22:25:59 2011] Source does appear to be extended
[Sun Dec 25 22:25:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 17:43:59 2011] Using EEF radius (= 11.34 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 17:43:59 2011] Initial guess for spatial extent in simple fitting = 11.34"
[Wed Dec 28 17:43:59 2011] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.932
[Wed Dec 28 17:43:59 2011] Giving source the simple spatial ID 31 for pass 1, mean size = 11.34"
[Thu Dec 29 13:37:03 2011] fullrun_mos2_xmm0412990101_pi300-10000_cl_pass1_src31.ximg exists
[Thu Dec 29 13:37:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990101_pi300-10000_cl_pass1_src31.csv
[Thu Dec 29 13:37:03 2011] fullrun_mos2_xmm0412990101_pi300-10000_cl_pass1_src31_1.ximg exists
[Thu Dec 29 13:37:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990101_pi300-10000_cl_pass1_src31.csv
[Thu Dec 29 13:37:03 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990101_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990101_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 13:37:05 2011] fullrun_mos2_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Thu Dec 29 13:37:05 2011] fullrun_mos2_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Thu Dec 29 13:37:05 2011] Fit fullrun_mos2_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Thu Dec 29 13:39:16 2011] Spatial fit model total counts = 2561.350000, observed total counts = 2562.000000
[Thu Dec 29 13:39:16 2011] Offset between fit and detection position for source 44 = 3.610804 pixels
[Thu Dec 29 13:39:16 2011] 2583.724000 total counts/ 2125.000000 bgd. counts: snr = 9.951121
Spatial fit parameters:
  Offset between fit and detection position for source 44 = 3.610804 pixels
  Position = (303.6, 162.9) = 8 49 24.59 -45 43 15.0
  Extent = 22.7 (22.6-45.4)", rotation angle = 0
  Source counts = 458.7 +/- 50.8
  Background counts = 2125.0
  Rate = 0.008 +/- 0.0008
[Thu Dec 29 13:39:17 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 13:39:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 13:39:17 2011] Assessing source extent using major axis lower bound
[Thu Dec 29 13:39:17 2011] Source does appear to be extended
[Thu Dec 29 13:39:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan  2 23:10:48 2012] XMMSAS src. selection expression = ellipse(26368.414000, 14127.040200, 1361.328039, 1361.328039, 0.000000, X, Y)
[Mon Jan  2 23:10:48 2012] Writing source region out to fullrun_mos2_xmm0412990101_pi300-10000_pass1_cl_src44_src.reg
[Mon Jan  2 23:10:48 2012] Extracting stamp from image fullrun_mos2_xmm0412990101_pi300-10000_cl_sm2.00.img.gz, (225, 85) - (382, 241)
[Mon Jan  2 23:10:48 2012] XMMSAS bgd. selection expression = annulus(26368.414000, 14127.040200, 2268.880065, 4537.760131, X, Y) && !ellipse(32142.142000, 19978.411000, 1634.728047, 1634.728047, 0.000000, X, Y) && !ellipse(31311.982000, 21611.995400, 2966.864085, 1285.312037, 228.961000, X, Y) && !ellipse(31332.860000, 20655.282000, 3269.456094, 3269.456094, 0.000000, X, Y) && !ellipse(22623.644775, 16279.721756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22607.449097, 18147.638412, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(33344.210000, 18474.100000, 3691.248106, 3691.248106, 0.000000, X, Y) && !ellipse(31345.009796, 10884.148651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34890.788000, 18020.582000, 3987.760115, 3987.760115, 0.000000, X, Y)
[Mon Jan  2 23:10:48 2012] Writing fullrun_mos2_xmm0412990101_pi300-10000_pass1_cl_src44.gif
[Tue Jan  3 00:18:01 2012] Mean detx,y = (-1133.58, 9936.32) 
[Tue Jan  3 00:18:05 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan  3 00:19:11 2012] Binned source spectrum to 10 counts/bin
[Tue Jan  3 00:19:12 2012] Setting source spectrum file to fullrun_mos2_xmm0412990101_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Tue Jan  3 00:19:12 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412990101_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Tue Jan  3 09:12:43 2012] Updating aperture counts using extracted products
[Tue Jan  3 09:12:43 2012] Error reading totcts from fullrun_mos2_xmm0412990101_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Tue Jan  3 09:12:47 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 09:12:47 2012] Using photon index=1.80, rate=0.00756, arf fullrun_mos2_xmm0412990101_pi300-10000_pass1_cl_src44.arf
[Tue Jan  3 09:12:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 09:12:47 2012] Updating source flux to 1.2e-13