[Sat Dec 24 00:47:10 2011] Detection parameters:
  Position = (221.0, 331.9) = 8 49 58.80 -45 30 59.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 174.5 +/- 25.7
  Background counts = 186.8
  Rate = 0.004 +/- 0.0006

[Sat Dec 24 00:47:16 2011] Off-axis axis estimate = 6.12'
[Sun Dec 25 08:14:19 2011] Using EEF radius (= 9.49 ")to estimate initial spatial extent for simple fitting
[Sun Dec 25 08:14:19 2011] Initial guess for spatial extent in simple fitting = 9.49"
[Sun Dec 25 08:14:19 2011] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.252
[Sun Dec 25 08:14:19 2011] Giving source the simple spatial ID 37 for pass 0, mean size = 9.49"
[Sun Dec 25 22:23:13 2011] fullrun_mos2_xmm0412990101_pi300-10000_cl_pass0_src37.ximg exists
[Sun Dec 25 22:23:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990101_pi300-10000_cl_pass0_src37.csv
[Sun Dec 25 22:23:13 2011] fullrun_mos2_xmm0412990101_pi300-10000_cl_pass0_src37_1.ximg exists
[Sun Dec 25 22:23:13 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990101_pi300-10000_cl_pass0_src37.csv
[Sun Dec 25 22:23:13 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990101_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990101_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 22:23:19 2011] fullrun_mos2_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Sun Dec 25 22:23:19 2011] fullrun_mos2_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Sun Dec 25 22:23:19 2011] Fit fullrun_mos2_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Sun Dec 25 22:25:59 2011] Spatial fit model total counts = 2519.240000, observed total counts = 2544.000000
[Sun Dec 25 22:25:59 2011] Offset between fit and detection position for source 25 = 3.502941 pixels
[Sun Dec 25 22:25:59 2011] 2355.170000 total counts/ 1083.140000 bgd. counts: snr = 38.650495
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 3.502941 pixels
  Position = (217.6, 332.8) = 8 50 0.20 -45 30 55.7
  Extent = 19.0 (18.9-37.9)", rotation angle = 0
  Source counts = 1272.0 +/- 48.5
  Background counts = 1083.1
  Rate = 0.02 +/- 0.0008
[Sun Dec 25 22:25:59 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 22:25:59 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 22:25:59 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 22:25:59 2011] Source does appear to be extended
[Sun Dec 25 22:25:59 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 22:25:59 2011] Source is confused with source 23
[Wed Dec 28 17:43:59 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Dec 28 17:43:59 2011] Initial guess for spatial extent in simple fitting = 18.97"
[Wed Dec 28 17:43:59 2011] source mask rpix=4.4, npix_max = 94, mask sum = 82, frac = 0.867
[Wed Dec 28 17:43:59 2011] Giving source the simple spatial ID 35 for pass 1, mean size = 18.97"
[Thu Dec 29 13:37:03 2011] fullrun_mos2_xmm0412990101_pi300-10000_cl_pass1_src35.ximg exists
[Thu Dec 29 13:37:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990101_pi300-10000_cl_pass1_src35.csv
[Thu Dec 29 13:37:03 2011] fullrun_mos2_xmm0412990101_pi300-10000_cl_pass1_src35_1.ximg exists
[Thu Dec 29 13:37:03 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412990101_pi300-10000_cl_pass1_src35.csv
[Thu Dec 29 13:37:03 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412990101_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412990101_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Dec 29 13:37:05 2011] fullrun_mos2_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Thu Dec 29 13:37:05 2011] fullrun_mos2_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Thu Dec 29 13:37:05 2011] Fit fullrun_mos2_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly
[Thu Dec 29 13:39:16 2011] Warning, spatial fit 35 centroid is now closest to src. 72
[Thu Dec 29 13:39:17 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 13:39:17 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 13:39:17 2011] Assessing source extent using major axis lower bound
[Thu Dec 29 13:39:17 2011] Source does appear to be extended
[Thu Dec 29 13:39:17 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jan  2 23:10:48 2012] Counts = 1272.030000, rescaling region sizes by 2.000000
[Mon Jan  2 23:10:48 2012] XMMSAS src. selection expression = ellipse(18884.320000, 28906.913940, 2276.796066, 2276.796066, 0.000000, X, Y)
[Mon Jan  2 23:10:48 2012] Writing source region out to fullrun_mos2_xmm0412990101_pi300-10000_pass1_cl_src25_src.reg
[Mon Jan  2 23:10:48 2012] Extracting stamp from image fullrun_mos2_xmm0412990101_pi300-10000_cl_sm2.00.img.gz, (87, 202) - (348, 464)
[Mon Jan  2 23:10:48 2012] XMMSAS bgd. selection expression = annulus(18884.320000, 28906.913940, 7589.320218, 15178.640437, X, Y) && !ellipse(18386.391922, 15992.484756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19695.685460, 27936.891400, 310.906409, 221.255206, 83.182850, X, Y) && !ellipse(32142.142000, 19978.411000, 1634.728047, 1634.728047, 0.000000, X, Y) && !ellipse(31696.322000, 21393.712000, 1483.432043, 1483.432043, 0.000000, X, Y) && !ellipse(31311.982000, 21611.995400, 2966.864085, 1285.312037, 228.961000, X, Y) && !ellipse(32347.548859, 20831.500000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25078.240601, 21443.825424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30533.547600, 22421.717400, 1193.152034, 1193.152034, 0.000000, X, Y) && !ellipse(32380.013432, 19602.482944, 1289.540239, 502.714159, 359.139175, X, Y) && !ellipse(31332.860000, 20655.282000, 3269.456094, 3269.456094, 0.000000, X, Y) && !ellipse(30153.788000, 22390.773200, 1381.040040, 1381.040040, 0.000000, X, Y) && !ellipse(30134.595215, 21705.483871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28531.913330, 22918.090179, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26825.321564, 19784.709564, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11336.758133, 26909.568298, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32601.709503, 20483.500000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32160.844543, 21179.500000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33911.258000, 18943.475400, 1329.888038, 1329.888038, 0.000000, X, Y) && !ellipse(33352.148224, 19839.818680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22623.644775, 16279.721756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33808.271000, 18418.296000, 1084.480031, 376.260011, 329.754500, X, Y) && !ellipse(12893.081600, 28998.418000, 1898.528055, 1898.528055, 0.000000, X, Y) && !ellipse(12765.161000, 28756.438000, 1601.312046, 1601.312046, 0.000000, X, Y) && !ellipse(30021.461761, 22055.970306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21519.389600, 26703.810400, 1331.608038, 1331.608038, 0.000000, X, Y) && !ellipse(29086.787903, 23087.860718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33169.992000, 20641.706200, 1602.880046, 421.103212, 90.000000, X, Y) && !ellipse(22607.449097, 18147.638412, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(26368.414000, 14127.040200, 1815.104052, 1815.104052, 0.000000, X, Y) && !ellipse(28636.320000, 23301.197800, 1311.824038, 1311.824038, 0.000000, X, Y) && !ellipse(27455.010000, 23877.832000, 2522.768073, 2522.768073, 0.000000, X, Y) && !ellipse(25680.097000, 21369.824800, 1008.592029, 1008.592029, 0.000000, X, Y) && !ellipse(21729.216000, 26862.168000, 1290.504037, 1290.504037, 0.000000, X, Y) && !ellipse(33344.210000, 18474.100000, 3691.248106, 3691.248106, 0.000000, X, Y) && !ellipse(34115.202000, 18078.756000, 1845.624053, 1845.624053, 0.000000, X, Y) && !ellipse(23377.797882, 26055.493164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22161.948000, 26451.502000, 2576.344074, 2576.344074, 0.000000, X, Y) && !ellipse(14252.532547, 18304.082031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34435.732000, 19196.254000, 702.964020, 702.964020, 0.000000, X, Y) && !ellipse(34105.369415, 19938.774277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25466.413400, 24421.246800, 1137.608033, 1137.608033, 0.000000, X, Y) && !ellipse(20961.014000, 26934.260000, 1399.768040, 1399.768040, 0.000000, X, Y) && !ellipse(28616.452000, 22136.562000, 1311.752038, 1311.752038, 0.000000, X, Y) && !ellipse(18538.643600, 27150.190000, 764.396022, 764.396022, 0.000000, X, Y) && !ellipse(34647.858000, 19350.970000, 1757.808051, 705.368820, 341.764900, X, Y) && !ellipse(34890.788000, 18020.582000, 3987.760115, 3987.760115, 0.000000, X, Y) && !ellipse(37515.692000, 15918.388000, 3998.080115, 3998.080115, 0.000000, X, Y) && !ellipse(11649.166800, 28462.872000, 3944.832114, 3944.832114, 0.000000, X, Y) && !ellipse(17940.422600, 27366.162960, 1238.736036, 470.125614, 90.000000, X, Y) && !ellipse(35577.270634, 18614.776000, 1540.496044, 1540.496044, 0.000000, X, Y) && !ellipse(23393.003800, 26535.944000, 1196.832034, 1196.832034, 0.000000, X, Y) && !ellipse(20132.026000, 26148.524000, 1384.520040, 1384.520040, 0.000000, X, Y) && !ellipse(21965.334244, 27475.639130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20055.612000, 27416.758000, 937.600027, 937.600027, 0.000000, X, Y) && !ellipse(36752.402000, 16565.668000, 2991.192086, 2991.192086, 0.000000, X, Y) && !ellipse(33546.390167, 17826.382523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20537.559052, 27357.620422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19532.248000, 28376.240000, 2566.712074, 2566.712074, 0.000000, X, Y) && !ellipse(19141.616000, 26712.878000, 1461.240042, 1461.240042, 0.000000, X, Y) && !ellipse(22625.423645, 26914.517273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34857.440979, 18735.907944, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11892.830000, 29476.208000, 3837.472110, 3837.472110, 0.000000, X, Y)
[Mon Jan  2 23:10:48 2012] Writing fullrun_mos2_xmm0412990101_pi300-10000_pass1_cl_src25.gif
[Tue Jan  3 00:36:43 2012] Mean detx,y = (-4972.93, -5877.29) 
[Tue Jan  3 00:36:49 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jan  3 00:45:55 2012] Binned source spectrum to 10 counts/bin
[Tue Jan  3 00:45:55 2012] Setting source spectrum file to fullrun_mos2_xmm0412990101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Tue Jan  3 00:45:55 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412990101_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Tue Jan  3 09:12:43 2012] Updating aperture counts using extracted products
[Tue Jan  3 09:12:43 2012] Error reading totcts from fullrun_mos2_xmm0412990101_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Tue Jan  3 09:12:48 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 09:12:48 2012] Using photon index=1.80, rate=0.021, arf fullrun_mos2_xmm0412990101_pi300-10000_pass1_cl_src25.arf
[Tue Jan  3 09:12:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 09:12:48 2012] Updating source flux to 2.3e-13
[Tue Jan  3 09:23:05 2012] Flag c found in src. 25 procflags, skipping spectral fitting