[Sat Dec 24 00:45:41 2011] Detection parameters:
  Position = (436.5, 182.0) = 8 48 29.42 -45 41 53.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 151.5 +/- 24.1
  Background counts = 140.7
  Rate = 0.002 +/- 0.0004

[Sat Dec 24 00:45:41 2011] Off-axis axis estimate = 13.09'
[Sat Dec 24 19:47:44 2011] Using EEF radius (= 12.98 ")to estimate initial spatial extent for simple fitting
[Sat Dec 24 19:47:44 2011] Initial guess for spatial extent in simple fitting = 12.98"
[Sat Dec 24 19:47:44 2011] source mask rpix=3.0, npix_max = 48, mask sum = 42, frac = 0.866
[Sat Dec 24 19:47:44 2011] Giving source the simple spatial ID 67 for pass 0, mean size = 12.98"
[Sun Dec 25 08:14:16 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_src67.ximg exists
[Sun Dec 25 08:14:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_src67.csv
[Sun Dec 25 08:14:16 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_src67_1.ximg exists
[Sun Dec 25 08:14:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_src67.csv
[Sun Dec 25 08:14:16 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 08:14:18 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src67.ximg exists
[Sun Dec 25 08:14:18 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src67_1.ximg exists
[Sun Dec 25 08:14:18 2011] Fit fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src67 appears to have run properly
[Sun Dec 25 22:25:18 2011] Source 92 is offset by -3.746433 and 7.593747 pixels which is larger than
2 X fitted extent = 6.999770 x 6.999770, not incorporating fit results
[Sun Dec 25 22:25:19 2011] Warning: source 75 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 92 at 10.344390 pixels away
[Sun Dec 25 22:25:19 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 22:25:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 22:25:19 2011] Assessing source extent using major
[Sun Dec 25 22:25:19 2011] Source does appear to be extended
[Sun Dec 25 22:25:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 22:25:19 2011] Source is confused with source 91
[Sun Dec 25 22:25:19 2011] Source is confused with source 89
[Tue Dec 27 08:47:47 2011] Using EEF radius (= 12.98 ")to estimate initial spatial extent for simple fitting
[Tue Dec 27 08:47:47 2011] Initial guess for spatial extent in simple fitting = 12.98"
[Tue Dec 27 08:47:47 2011] source mask rpix=3.0, npix_max = 48, mask sum = 42, frac = 0.866
[Tue Dec 27 08:47:47 2011] Giving source the simple spatial ID 59 for pass 1, mean size = 12.98"
[Wed Dec 28 17:43:56 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_src59.ximg exists
[Wed Dec 28 17:43:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_src59.csv
[Wed Dec 28 17:43:56 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_src59_1.ximg exists
[Wed Dec 28 17:43:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_src59.csv
[Wed Dec 28 17:43:56 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_src59_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_src59.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 17:43:58 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src59.ximg exists
[Wed Dec 28 17:43:58 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src59_1.ximg exists
[Wed Dec 28 17:43:58 2011] Fit fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src59 appears to have run properly
[Thu Dec 29 13:38:40 2011] Warning, spatial fit 59 centroid is now closest to src. 88
[Thu Dec 29 13:38:40 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 13:38:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 13:38:40 2011] Assessing source extent using major
[Thu Dec 29 13:38:40 2011] Source does appear to be extended
[Thu Dec 29 13:38:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 21:58:25 2012] XMMSAS src. selection expression = ellipse(37927.828369, 15786.716003, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jan  1 21:58:25 2012] Writing source region out to fullrun_mos1_xmm0412990101_pi300-10000_pass1_cl_src92_src.reg
[Sun Jan  1 21:58:25 2012] Extracting stamp from image fullrun_mos1_xmm0412990101_pi300-10000_cl_sm2.00.img.gz, (399, 145) - (474, 220)
[Sun Jan  1 21:58:25 2012] XMMSAS bgd. selection expression = annulus(37927.828369, 15786.716003, 1087.500000, 2175.000000, X, Y) && !ellipse(36203.562000, 17408.030000, 1941.592056, 1941.592056, 0.000000, X, Y) && !ellipse(35676.216000, 17559.648000, 3244.112093, 3244.112093, 0.000000, X, Y) && !ellipse(37116.842000, 16488.406000, 2076.080060, 2076.080060, 0.000000, X, Y) && !ellipse(37260.184000, 16060.088000, 1981.560057, 1981.560057, 0.000000, X, Y) && !ellipse(34096.272000, 18751.847660, 1738.400050, 1017.472029, 70.169500, X, Y) && !ellipse(35290.192000, 17753.544000, 4051.008117, 4051.008117, 0.000000, X, Y) && !ellipse(34677.956000, 17882.640000, 2536.072073, 2536.072073, 0.000000, X, Y) && !ellipse(38581.581543, 14417.978043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35168.415920, 18333.885200, 1622.056047, 1622.056047, 0.000000, X, Y) && !ellipse(35908.545837, 16001.760101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36717.428000, 16576.008000, 2025.504058, 2025.504058, 0.000000, X, Y)
[Sun Jan  1 21:58:25 2012] Writing fullrun_mos1_xmm0412990101_pi300-10000_pass1_cl_src92.gif
[Mon Jan  2 00:38:10 2012] Mean detx,y = (11289.52, -10598.45) 
[Mon Jan  2 00:38:13 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jan  2 00:38:42 2012] Binned source spectrum to 10 counts/bin
[Mon Jan  2 00:38:42 2012] Setting source spectrum file to fullrun_mos1_xmm0412990101_pi300-10000_pass1_cl_src92_src_b10.pi.gz
[Mon Jan  2 00:38:42 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412990101_pi300-10000_pass1_cl_src92_bgd.pi.gz
[Mon Jan  2 20:02:42 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jan  2 20:02:42 2012] rmf not generated due to insufficient counts
[Tue Jan  3 09:12:34 2012] Updating aperture counts using extracted products
[Tue Jan  3 09:12:34 2012] Error reading totcts from fullrun_mos1_xmm0412990101_pi300-10000_pass1_cl_src92_src_b10.pi.gz
[Tue Jan  3 09:12:39 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 09:12:39 2012] Using photon index=1.80, rate=0.00249, arf fullrun_mos1_xmm0412990101_pi300-10000_pass1_cl_src92.arf
[Tue Jan  3 09:12:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 09:12:39 2012] Updating source flux to 6.7e-14
[Tue Jan  3 09:12:54 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting