[Sat Dec 24 00:45:40 2011] Detection parameters:
  Position = (422.6, 189.2) = 8 48 35.20 -45 41 24.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 118.5 +/- 23.8
  Background counts = 181.7
  Rate = 0.002 +/- 0.0004

[Sat Dec 24 00:45:41 2011] Off-axis axis estimate = 11.99'
[Sat Dec 24 19:47:44 2011] Using EEF radius (= 12.42 ")to estimate initial spatial extent for simple fitting
[Sat Dec 24 19:47:44 2011] Initial guess for spatial extent in simple fitting = 12.42"
[Sat Dec 24 19:47:44 2011] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.088
[Sat Dec 24 19:47:44 2011] Giving source the simple spatial ID 85 for pass 0, mean size = 12.42"
[Sun Dec 25 08:14:16 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_src85.ximg exists
[Sun Dec 25 08:14:16 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_src85_1.ximg exists
[Sun Dec 25 08:14:16 2011] Fit fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_src85 appears to have run properly
[Sun Dec 25 08:14:19 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src85.ximg exists
[Sun Dec 25 08:14:19 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src85_1.ximg exists
[Sun Dec 25 08:14:19 2011] Fit fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src85 appears to have run properly
[Sun Dec 25 22:25:19 2011] Spatial fit model total counts = 2610.600000, observed total counts = 2610.000000
[Sun Dec 25 22:25:19 2011] Offset between fit and detection position for source 89 = 1.862951 pixels
[Sun Dec 25 22:25:19 2011] Warning, changing simple spatial fit ID from 85 to 74
[Sun Dec 25 22:25:19 2011] 2596.664000 total counts/ 2084.170000 bgd. counts: snr = 11.225927
Spatial fit parameters:
  Offset between fit and detection position for source 89 = 1.862951 pixels
  Position = (422.6, 191.1) = 8 48 35.21 -45 41 11.8
  Extent = 25.3 (25.1-25.5)", rotation angle = 0
  Source counts = 512.5 +/- 51.0
  Background counts = 2084.2
  Rate = 0.008 +/- 0.0008
[Sun Dec 25 22:25:19 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 22:25:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 22:25:19 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 22:25:19 2011] Source does appear to be extended
[Sun Dec 25 22:25:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 22:25:19 2011] Source is confused with source 86
[Tue Dec 27 08:47:47 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Dec 27 08:47:47 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Dec 27 08:47:47 2011] Initial guess for spatial extent in simple fitting = 25.32"
[Tue Dec 27 08:47:47 2011] source mask rpix=5.8, npix_max = 159, mask sum = 156, frac = 0.976
[Tue Dec 27 08:47:47 2011] Giving source the simple spatial ID 76 for pass 1, mean size = 25.32"
[Wed Dec 28 17:43:56 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_src76.ximg exists
[Wed Dec 28 17:43:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_src76.csv
[Wed Dec 28 17:43:56 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_src76_1.ximg exists
[Wed Dec 28 17:43:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_src76.csv
[Wed Dec 28 17:43:56 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_src76_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_src76.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 17:43:59 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src76.ximg exists
[Wed Dec 28 17:43:59 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src76_1.ximg exists
[Wed Dec 28 17:43:59 2011] Fit fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src76 appears to have run properly
[Thu Dec 29 13:38:40 2011] Warning, spatial fit 76 centroid is now closest to src. 85
[Thu Dec 29 13:38:40 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 13:38:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 13:38:40 2011] Assessing source extent using major axis lower bound
[Thu Dec 29 13:38:40 2011] Source does appear to be extended
[Thu Dec 29 13:38:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 21:58:27 2012] XMMSAS src. selection expression = ellipse(36717.428000, 16576.008000, 1519.128044, 1519.128044, 0.000000, X, Y)
[Sun Jan  1 21:58:27 2012] Writing source region out to fullrun_mos1_xmm0412990101_pi300-10000_pass1_cl_src89_src.reg
[Sun Jan  1 21:58:27 2012] Extracting stamp from image fullrun_mos1_xmm0412990101_pi300-10000_cl_sm2.00.img.gz, (335, 104) - (510, 278)
[Sun Jan  1 21:58:27 2012] XMMSAS bgd. selection expression = annulus(36717.428000, 16576.008000, 2531.880073, 5063.760146, X, Y) && !ellipse(30977.684000, 21604.934000, 2773.424080, 2773.424080, 0.000000, X, Y) && !ellipse(32200.538800, 20646.240000, 1600.128046, 1600.128046, 0.000000, X, Y) && !ellipse(31340.356000, 21143.174000, 1551.680045, 1551.680045, 0.000000, X, Y) && !ellipse(32172.440000, 19913.646000, 1203.480035, 1203.480035, 0.000000, X, Y) && !ellipse(31743.080000, 20608.636000, 1575.008045, 1575.008045, 0.000000, X, Y) && !ellipse(31015.272000, 22193.606000, 992.720029, 992.720029, 0.000000, X, Y) && !ellipse(31975.137600, 21501.196000, 1523.120044, 1523.120044, 0.000000, X, Y) && !ellipse(33061.082000, 18967.998000, 1619.720047, 1619.720047, 0.000000, X, Y) && !ellipse(28907.660000, 22452.684000, 2793.312080, 2793.312080, 0.000000, X, Y) && !ellipse(34086.075317, 19834.552429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32642.785461, 19703.780289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30712.042000, 22251.856000, 1402.912040, 1402.912040, 0.000000, X, Y) && !ellipse(31351.989868, 10913.950691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34231.928000, 17896.656000, 813.704023, 813.704023, 0.000000, X, Y) && !ellipse(30330.570000, 20630.580000, 1335.312038, 1335.312038, 0.000000, X, Y) && !ellipse(33914.380000, 18354.344000, 1627.408047, 864.736025, 244.716000, X, Y) && !ellipse(33326.748000, 18074.274783, 1283.504037, 336.472405, 86.195420, X, Y) && !ellipse(36203.562000, 17408.030000, 1941.592056, 1941.592056, 0.000000, X, Y) && !ellipse(33501.472000, 19929.913000, 1707.576049, 1707.576049, 0.000000, X, Y) && !ellipse(35676.216000, 17559.648000, 3244.112093, 3244.112093, 0.000000, X, Y) && !ellipse(33667.501984, 19180.045227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37927.828369, 15786.716003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35229.450409, 18995.123764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34513.794000, 19601.971800, 1181.872034, 1181.872034, 0.000000, X, Y) && !ellipse(33958.084320, 18061.725647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37116.842000, 16488.406000, 2076.080060, 2076.080060, 0.000000, X, Y) && !ellipse(37260.184000, 16060.088000, 1981.560057, 1981.560057, 0.000000, X, Y) && !ellipse(34096.272000, 18751.847660, 1738.400050, 1017.472029, 70.169500, X, Y) && !ellipse(35290.192000, 17753.544000, 4051.008117, 4051.008117, 0.000000, X, Y) && !ellipse(34677.956000, 17882.640000, 2536.072073, 2536.072073, 0.000000, X, Y) && !ellipse(38581.581543, 14417.978043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35168.415920, 18333.885200, 1622.056047, 1622.056047, 0.000000, X, Y) && !ellipse(35908.545837, 16001.760101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41714.498000, 22415.842000, 2125.696061, 1168.664034, 124.103300, X, Y)
[Sun Jan  1 21:58:27 2012] Writing fullrun_mos1_xmm0412990101_pi300-10000_pass1_cl_src89.gif
[Mon Jan  2 01:36:58 2012] Mean detx,y = (10203.64, -9523.68) 
[Mon Jan  2 01:37:01 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jan  2 01:38:02 2012] Binned source spectrum to 10 counts/bin
[Mon Jan  2 01:38:03 2012] Setting source spectrum file to fullrun_mos1_xmm0412990101_pi300-10000_pass1_cl_src89_src_b10.pi.gz
[Mon Jan  2 01:38:03 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412990101_pi300-10000_pass1_cl_src89_bgd.pi.gz
[Tue Jan  3 09:12:36 2012] Updating aperture counts using extracted products
[Tue Jan  3 09:12:36 2012] Error reading totcts from fullrun_mos1_xmm0412990101_pi300-10000_pass1_cl_src89_src_b10.pi.gz
[Tue Jan  3 09:12:41 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 09:12:41 2012] Using photon index=1.80, rate=0.00844, arf fullrun_mos1_xmm0412990101_pi300-10000_pass1_cl_src89.arf
[Tue Jan  3 09:12:41 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 09:12:41 2012] Updating source flux to 1.7e-13
[Tue Jan  3 09:12:54 2012] Flag c found in src. 89 procflags, skipping spectral fitting