[Sat Dec 24 00:45:39 2011] Detection parameters:
  Position = (405.7, 209.9) = 8 48 42.23 -45 39 51.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 120.6 +/- 26.1
  Background counts = 256.5
  Rate = 0.002 +/- 0.0004

[Sat Dec 24 00:45:41 2011] Off-axis axis estimate = 10.08'
[Sat Dec 24 19:47:44 2011] Using EEF radius (= 11.47 ")to estimate initial spatial extent for simple fitting
[Sat Dec 24 19:47:44 2011] Initial guess for spatial extent in simple fitting = 11.47"
[Sat Dec 24 19:47:44 2011] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.915
[Sat Dec 24 19:47:44 2011] Giving source the simple spatial ID 81 for pass 0, mean size = 11.47"
[Sun Dec 25 08:14:16 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_src81.ximg exists
[Sun Dec 25 08:14:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_src81.csv
[Sun Dec 25 08:14:16 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_src81_1.ximg exists
[Sun Dec 25 08:14:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_src81.csv
[Sun Dec 25 08:14:16 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_src81_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 08:14:19 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src81.ximg exists
[Sun Dec 25 08:14:19 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src81_1.ximg exists
[Sun Dec 25 08:14:19 2011] Fit fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src81 appears to have run properly
[Sun Dec 25 22:25:19 2011] Spatial fit model total counts = 3516.050000, observed total counts = 3514.000000
[Sun Dec 25 22:25:19 2011] Offset between fit and detection position for source 79 = 1.638027 pixels
[Sun Dec 25 22:25:19 2011] 3421.390000 total counts/ 3147.480000 bgd. counts: snr = 4.882322
Spatial fit parameters:
  Offset between fit and detection position for source 79 = 1.638027 pixels
  Position = (404.8, 211.3) = 8 48 42.62 -45 39 44.1
  Extent = 20.3 (15.0-22.9)", rotation angle = 0
  Source counts = 273.9 +/- 58.5
  Background counts = 3147.5
  Rate = 0.005 +/- 0.001
[Sun Dec 25 22:25:19 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 22:25:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 22:25:19 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 22:25:19 2011] Source does appear to be extended
[Sun Dec 25 22:25:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 22:25:19 2011] Source is confused with source 84
[Tue Dec 27 08:47:47 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Dec 27 08:47:47 2011] Initial guess for spatial extent in simple fitting = 20.28"
[Tue Dec 27 08:47:47 2011] source mask rpix=4.7, npix_max = 106, mask sum = 100, frac = 0.939
[Tue Dec 27 08:47:47 2011] Giving source the simple spatial ID 72 for pass 1, mean size = 20.28"
[Wed Dec 28 17:43:56 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_src72.ximg exists
[Wed Dec 28 17:43:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_src72.csv
[Wed Dec 28 17:43:56 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_src72_1.ximg exists
[Wed Dec 28 17:43:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_src72.csv
[Wed Dec 28 17:43:56 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_src72_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_src72.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 17:43:58 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src72.ximg exists
[Wed Dec 28 17:43:58 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src72_1.ximg exists
[Wed Dec 28 17:43:59 2011] Fit fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src72 appears to have run properly
[Thu Dec 29 13:38:40 2011] Source 79 is offset by -1.674139 and -2.241940 pixels which is larger than
2 X fitted extent = 1.379218 x 1.379218, not incorporating fit results
[Thu Dec 29 13:38:40 2011] Warning, spatial fit 72 centroid is now closest to src. 87
[Thu Dec 29 13:38:40 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 13:38:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 13:38:40 2011] Assessing source extent using major axis lower bound
[Thu Dec 29 13:38:40 2011] Source does appear to be extended
[Thu Dec 29 13:38:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 21:58:27 2012] XMMSAS src. selection expression = ellipse(35168.415920, 18333.885200, 1216.542035, 1216.542035, 0.000000, X, Y)
[Sun Jan  1 21:58:27 2012] Writing source region out to fullrun_mos1_xmm0412990101_pi300-10000_pass1_cl_src79_src.reg
[Sun Jan  1 21:58:27 2012] Extracting stamp from image fullrun_mos1_xmm0412990101_pi300-10000_cl_sm2.00.img.gz, (335, 141) - (475, 281)
[Sun Jan  1 21:58:27 2012] XMMSAS bgd. selection expression = annulus(35168.415920, 18333.885200, 2027.570058, 4055.140117, X, Y) && !ellipse(30977.684000, 21604.934000, 2773.424080, 2773.424080, 0.000000, X, Y) && !ellipse(32200.538800, 20646.240000, 1600.128046, 1600.128046, 0.000000, X, Y) && !ellipse(31340.356000, 21143.174000, 1551.680045, 1551.680045, 0.000000, X, Y) && !ellipse(32172.440000, 19913.646000, 1203.480035, 1203.480035, 0.000000, X, Y) && !ellipse(31743.080000, 20608.636000, 1575.008045, 1575.008045, 0.000000, X, Y) && !ellipse(31015.272000, 22193.606000, 992.720029, 992.720029, 0.000000, X, Y) && !ellipse(31975.137600, 21501.196000, 1523.120044, 1523.120044, 0.000000, X, Y) && !ellipse(30323.206000, 22379.476000, 1287.584037, 1287.584037, 356.371000, X, Y) && !ellipse(33061.082000, 18967.998000, 1619.720047, 1619.720047, 0.000000, X, Y) && !ellipse(28907.660000, 22452.684000, 2793.312080, 2793.312080, 0.000000, X, Y) && !ellipse(34086.075317, 19834.552429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32642.785461, 19703.780289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30712.042000, 22251.856000, 1402.912040, 1402.912040, 0.000000, X, Y) && !ellipse(34231.928000, 17896.656000, 813.704023, 813.704023, 0.000000, X, Y) && !ellipse(30330.570000, 20630.580000, 1335.312038, 1335.312038, 0.000000, X, Y) && !ellipse(33914.380000, 18354.344000, 1627.408047, 864.736025, 244.716000, X, Y) && !ellipse(33326.748000, 18074.274783, 1283.504037, 336.472405, 86.195420, X, Y) && !ellipse(36203.562000, 17408.030000, 1941.592056, 1941.592056, 0.000000, X, Y) && !ellipse(33501.472000, 19929.913000, 1707.576049, 1707.576049, 0.000000, X, Y) && !ellipse(35676.216000, 17559.648000, 3244.112093, 3244.112093, 0.000000, X, Y) && !ellipse(33667.501984, 19180.045227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37927.828369, 15786.716003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35229.450409, 18995.123764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34513.794000, 19601.971800, 1181.872034, 1181.872034, 0.000000, X, Y) && !ellipse(33958.084320, 18061.725647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37116.842000, 16488.406000, 2076.080060, 2076.080060, 0.000000, X, Y) && !ellipse(37260.184000, 16060.088000, 1981.560057, 1981.560057, 0.000000, X, Y) && !ellipse(34096.272000, 18751.847660, 1738.400050, 1017.472029, 70.169500, X, Y) && !ellipse(35290.192000, 17753.544000, 4051.008117, 4051.008117, 0.000000, X, Y) && !ellipse(34677.956000, 17882.640000, 2536.072073, 2536.072073, 0.000000, X, Y) && !ellipse(38581.581543, 14417.978043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35908.545837, 16001.760101, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36717.428000, 16576.008000, 2025.504058, 2025.504058, 0.000000, X, Y)
[Sun Jan  1 21:58:27 2012] Writing fullrun_mos1_xmm0412990101_pi300-10000_pass1_cl_src79.gif
[Mon Jan  2 01:33:33 2012] Mean detx,y = (8160.12, -8467.52) 
[Mon Jan  2 01:33:36 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jan  2 01:34:08 2012] Binned source spectrum to 10 counts/bin
[Mon Jan  2 01:34:09 2012] Setting source spectrum file to fullrun_mos1_xmm0412990101_pi300-10000_pass1_cl_src79_src_b10.pi.gz
[Mon Jan  2 01:34:09 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412990101_pi300-10000_pass1_cl_src79_bgd.pi.gz
[Tue Jan  3 09:12:35 2012] Updating aperture counts using extracted products
[Tue Jan  3 09:12:35 2012] Error reading totcts from fullrun_mos1_xmm0412990101_pi300-10000_pass1_cl_src79_src_b10.pi.gz
[Tue Jan  3 09:12:40 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 09:12:40 2012] Using photon index=1.80, rate=0.00451, arf fullrun_mos1_xmm0412990101_pi300-10000_pass1_cl_src79.arf
[Tue Jan  3 09:12:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 09:12:40 2012] Updating source flux to 7.7e-14
[Tue Jan  3 09:12:54 2012] Flag b found in src. 79 procflags, skipping spectral fitting
[Tue Jan  3 09:12:54 2012] Flag c found in src. 79 procflags, skipping spectral fitting