[Sat Dec 24 00:45:38 2011] Detection parameters: Position = (348.3, 253.1) = 8 49 6.09 -45 36 43.8 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 267.5 +/- 32.5 Background counts = 329.9 Rate = 0.006 +/- 0.0007 [Sat Dec 24 00:45:41 2011] Off-axis axis estimate = 4.88' [Sat Dec 24 19:47:44 2011] Using EEF radius (= 8.87 ")to estimate initial spatial extent for simple fitting [Sat Dec 24 19:47:44 2011] Initial guess for spatial extent in simple fitting = 8.87" [Sat Dec 24 19:47:44 2011] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.969 [Sat Dec 24 19:47:44 2011] Giving source the simple spatial ID 14 for pass 0, mean size = 8.87" [Sun Dec 25 08:14:14 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_src14.ximg exists [Sun Dec 25 08:14:14 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_src14_1.ximg exists [Sun Dec 25 08:14:14 2011] Fit fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_src14 appears to have run properly [Sun Dec 25 08:14:17 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src14.ximg exists [Sun Dec 25 08:14:17 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists [Sun Dec 25 08:14:17 2011] Fit fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly [Sun Dec 25 22:25:18 2011] Spatial fit model total counts = 4954.410000, observed total counts = 4945.000000 [Sun Dec 25 22:25:18 2011] Offset between fit and detection position for source 54 = 3.442048 pixels [Sun Dec 25 22:25:18 2011] Warning, changing simple spatial fit ID from 14 to 3 [Sun Dec 25 22:25:18 2011] 4828.865000 total counts/ 4448.460000 bgd. counts: snr = 5.703499 Spatial fit parameters: Offset between fit and detection position for source 54 = 3.442048 pixels Position = (350.7, 255.5) = 8 49 5.08 -45 36 32.2 Extent = 18.5 (18.5-37.0)", rotation angle = 0 Source counts = 380.4 +/- 69.5 Background counts = 4448.5 Rate = 0.006 +/- 0.001 [Sun Dec 25 22:25:18 2011] Spatial fit model total counts = 5256.880000, observed total counts = 5263.000000 [Sun Dec 25 22:25:18 2011] Offset between fit and detection position for source 54 = 3.146655 pixels [Sun Dec 25 22:25:18 2011] Warning, changing simple spatial fit ID from 3 to 15 [Sun Dec 25 22:25:18 2011] 5053.052000 total counts/ 4568.510000 bgd. counts: snr = 7.168762 Spatial fit parameters: Offset between fit and detection position for source 54 = 3.146655 pixels Position = (347.6, 254.8) = 8 49 6.35 -45 36 35.1 Extent = 17.3 (13.6-34.7)", rotation angle = 0 Source counts = 484.5 +/- 71.1 Background counts = 4568.5 Rate = 0.008 +/- 0.001 [Sun Dec 25 22:25:19 2011] Vigneting correction estimate = 1.000000 [Sun Dec 25 22:25:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Dec 25 22:25:19 2011] Assessing source extent using major axis lower bound [Sun Dec 25 22:25:19 2011] Source does appear to be extended [Sun Dec 25 22:25:19 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Dec 25 22:25:19 2011] Source is confused with source 52 [Sun Dec 25 22:25:19 2011] Source is confused with source 49 [Sun Dec 25 22:25:19 2011] Source is confused with source 50 [Sun Dec 25 22:25:19 2011] Source is confused with source 55 [Sun Dec 25 22:25:19 2011] Source is confused with source 56 [Sun Dec 25 22:25:19 2011] Source is confused with source 47 [Tue Dec 27 08:47:47 2011] Using previous fit value to estimate initial spatial extent for simple fitting [Tue Dec 27 08:47:47 2011] Initial guess for spatial extent in simple fitting = 17.33" [Tue Dec 27 08:47:47 2011] source mask rpix=4.0, npix_max = 80, mask sum = 80, frac = 0.994 [Tue Dec 27 08:47:47 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 17.33" [Wed Dec 28 17:43:55 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_src13.ximg exists [Wed Dec 28 17:43:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_src13.csv [Wed Dec 28 17:43:55 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_src13_1.ximg exists [Wed Dec 28 17:43:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_src13.csv [Wed Dec 28 17:43:55 2011] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_src13_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Dec 28 17:43:57 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src13.ximg exists [Wed Dec 28 17:43:57 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists [Wed Dec 28 17:43:57 2011] Fit fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly [Thu Dec 29 13:38:40 2011] Spatial fit model total counts = 4950.070000, observed total counts = 4945.000000 [Thu Dec 29 13:38:40 2011] Offset between fit and detection position for source 54 = 3.017737 pixels [Thu Dec 29 13:38:40 2011] Warning, changing simple spatial fit ID from 13 to 3 [Thu Dec 29 13:38:40 2011] 4801.649000 total counts/ 4431.870000 bgd. counts: snr = 5.554548 Spatial fit parameters: Offset between fit and detection position for source 54 = 3.017737 pixels Position = (350.6, 255.5) = 8 49 5.13 -45 36 32.2 Extent = 18.5 (18.5-37.0)", rotation angle = 0 Source counts = 369.8 +/- 69.3 Background counts = 4431.9 Rate = 0.006 +/- 0.001 [Thu Dec 29 13:38:40 2011] Spatial fit model total counts = 10221.300000, observed total counts = 10163.000000 [Thu Dec 29 13:38:40 2011] Offset between fit and detection position for source 54 = 2.730208 pixels [Thu Dec 29 13:38:40 2011] Warning, changing simple spatial fit ID from 3 to 9 [Thu Dec 29 13:38:40 2011] 9678.066000 total counts/ 9298.490000 bgd. counts: snr = 3.936339 Spatial fit parameters: Offset between fit and detection position for source 54 = 2.730208 pixels Position = (349.1, 257.8) = 8 49 5.75 -45 36 22.3 Extent = 16.1" x 16.1", rotation angle = 356 Source counts = 379.6 +/- 98.4 Background counts = 9298.5 Rate = 0.006 +/- 0.002 [Thu Dec 29 13:38:40 2011] Vigneting correction estimate = 1.000000 [Thu Dec 29 13:38:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Dec 29 13:38:40 2011] Assessing source extent using major [Thu Dec 29 13:38:40 2011] Source does appear to be extended [Thu Dec 29 13:38:40 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Jan 1 21:58:22 2012] XMMSAS src. selection expression = ellipse(30323.206000, 22379.476000, 965.688028, 965.688028, 356.371000, X, Y) [Sun Jan 1 21:58:22 2012] Writing source region out to fullrun_mos1_xmm0412990101_pi300-10000_pass1_cl_src54_src.reg [Sun Jan 1 21:58:22 2012] Extracting stamp from image fullrun_mos1_xmm0412990101_pi300-10000_cl_sm2.00.img.gz, (294, 202) - (405, 313) [Sun Jan 1 21:58:22 2012] XMMSAS bgd. selection expression = annulus(30323.206000, 22379.476000, 1609.480046, 3218.960093, X, Y) && !ellipse(30977.684000, 21604.934000, 2773.424080, 2773.424080, 0.000000, X, Y) && !ellipse(32200.538800, 20646.240000, 1600.128046, 1600.128046, 0.000000, X, Y) && !ellipse(31340.356000, 21143.174000, 1551.680045, 1551.680045, 0.000000, X, Y) && !ellipse(32172.440000, 19913.646000, 1203.480035, 1203.480035, 0.000000, X, Y) && !ellipse(31743.080000, 20608.636000, 1575.008045, 1575.008045, 0.000000, X, Y) && !ellipse(28619.714000, 23582.048000, 1323.808038, 1323.808038, 0.000000, X, Y) && !ellipse(31015.272000, 22193.606000, 992.720029, 992.720029, 0.000000, X, Y) && !ellipse(31975.137600, 21501.196000, 1523.120044, 1523.120044, 0.000000, X, Y) && !ellipse(28173.964935, 22754.120880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29903.788208, 22316.418060, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33061.082000, 18967.998000, 1619.720047, 1619.720047, 0.000000, X, Y) && !ellipse(25617.258000, 21118.642000, 2601.744075, 2601.744075, 0.000000, X, Y) && !ellipse(29115.602936, 22826.319092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28907.660000, 22452.684000, 2793.312080, 2793.312080, 0.000000, X, Y) && !ellipse(29683.038000, 21987.837200, 1419.328041, 1419.328041, 0.000000, X, Y) && !ellipse(34086.075317, 19834.552429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28703.148000, 22749.082000, 1356.088039, 1356.088039, 0.000000, X, Y) && !ellipse(32642.785461, 19703.780289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27654.902000, 23388.820000, 1287.584037, 625.560018, -0.000000, X, Y) && !ellipse(29579.791200, 21942.346200, 1396.656040, 1396.656040, 0.000000, X, Y) && !ellipse(30712.042000, 22251.856000, 1402.912040, 1402.912040, 0.000000, X, Y) && !ellipse(27739.649136, 23451.363998, 2092.320060, 1634.507658, 0.000000, X, Y) && !ellipse(30330.570000, 20630.580000, 1335.312038, 1335.312038, 0.000000, X, Y) && !ellipse(33914.380000, 18354.344000, 1627.408047, 864.736025, 244.716000, X, Y) && !ellipse(33326.748000, 18074.274783, 1283.504037, 336.472405, 86.195420, X, Y) && !ellipse(26213.708000, 24620.084000, 1143.248033, 1143.248033, 0.000000, X, Y) && !ellipse(26964.868000, 19581.132000, 1435.656041, 1435.656041, 0.000000, X, Y) && !ellipse(33501.472000, 19929.913000, 1707.576049, 1707.576049, 0.000000, X, Y) && !ellipse(35676.216000, 17559.648000, 3244.112093, 3244.112093, 0.000000, X, Y) && !ellipse(33667.501984, 19180.045227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34513.794000, 19601.971800, 1181.872034, 1181.872034, 0.000000, X, Y) && !ellipse(34096.272000, 18751.847660, 1738.400050, 1017.472029, 70.169500, X, Y) && !ellipse(35290.192000, 17753.544000, 4051.008117, 4051.008117, 0.000000, X, Y) && !ellipse(34677.956000, 17882.640000, 2536.072073, 2536.072073, 0.000000, X, Y) [Sun Jan 1 21:58:22 2012] Writing fullrun_mos1_xmm0412990101_pi300-10000_pass1_cl_src54.gif [Sun Jan 1 22:50:26 2012] Mean detx,y = (3110.83, -4739.66) [Sun Jan 1 22:50:29 2012] Setting backscal keywords in source and bgd. spectrum [Sun Jan 1 22:51:12 2012] Binned source spectrum to 10 counts/bin [Sun Jan 1 22:51:12 2012] Setting source spectrum file to fullrun_mos1_xmm0412990101_pi300-10000_pass1_cl_src54_src_b10.pi.gz [Sun Jan 1 22:51:12 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412990101_pi300-10000_pass1_cl_src54_bgd.pi.gz [Tue Jan 3 09:12:31 2012] Updating aperture counts using extracted products [Tue Jan 3 09:12:31 2012] Error reading totcts from fullrun_mos1_xmm0412990101_pi300-10000_pass1_cl_src54_src_b10.pi.gz [Tue Jan 3 09:12:37 2012] Calculating source flux in energy range 0.30-8.00 [Tue Jan 3 09:12:37 2012] Using photon index=1.80, rate=0.00625, arf fullrun_mos1_xmm0412990101_pi300-10000_pass1_cl_src54.arf [Tue Jan 3 09:12:37 2012] Assuming count rate is from the 0.30-10.00 bandpass [Tue Jan 3 09:12:37 2012] Updating source flux to 6.9e-14 [Tue Jan 3 09:12:54 2012] Flag c found in src. 54 procflags, skipping spectral fitting