[Sat Dec 24 00:45:37 2011] Detection parameters:
  Position = (349.5, 259.0) = 8 49 5.58 -45 36 16.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 196.6 +/- 30.9
  Background counts = 316.9
  Rate = 0.004 +/- 0.0007

[Sat Dec 24 00:45:41 2011] Off-axis axis estimate = 4.68'
[Sat Dec 24 19:47:44 2011] Using EEF radius (= 8.77 ")to estimate initial spatial extent for simple fitting
[Sat Dec 24 19:47:44 2011] Initial guess for spatial extent in simple fitting = 8.77"
[Sat Dec 24 19:47:44 2011] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.988
[Sat Dec 24 19:47:44 2011] Giving source the simple spatial ID 31 for pass 0, mean size = 8.77"
[Sun Dec 25 08:14:15 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_src31.ximg exists
[Sun Dec 25 08:14:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_src31.csv
[Sun Dec 25 08:14:15 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_src31_1.ximg exists
[Sun Dec 25 08:14:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_src31.csv
[Sun Dec 25 08:14:15 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 08:14:17 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Sun Dec 25 08:14:17 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Sun Dec 25 08:14:17 2011] Fit fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Sun Dec 25 22:25:18 2011] Spatial fit model total counts = 4823.450000, observed total counts = 4824.000000
[Sun Dec 25 22:25:18 2011] Offset between fit and detection position for source 47 = 4.849954 pixels
[Sun Dec 25 22:25:18 2011] 4616.039000 total counts/ 4217.170000 bgd. counts: snr = 6.142140
Spatial fit parameters:
  Offset between fit and detection position for source 47 = 4.849954 pixels
  Position = (353.6, 256.3) = 8 49 3.90 -45 36 28.6
  Extent = 17.5 (17.4-35.1)", rotation angle = 0
  Source counts = 398.9 +/- 67.9
  Background counts = 4217.2
  Rate = 0.007 +/- 0.001
[Sun Dec 25 22:25:19 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 22:25:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 22:25:19 2011] Assessing source extent using major axis lower bound
[Sun Dec 25 22:25:19 2011] Source does appear to be extended
[Sun Dec 25 22:25:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 25 22:25:19 2011] Source is confused with source 57
[Tue Dec 27 08:47:47 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Dec 27 08:47:47 2011] Initial guess for spatial extent in simple fitting = 17.54"
[Tue Dec 27 08:47:47 2011] source mask rpix=4.0, npix_max = 82, mask sum = 81, frac = 0.986
[Tue Dec 27 08:47:47 2011] Giving source the simple spatial ID 28 for pass 1, mean size = 17.54"
[Wed Dec 28 17:43:55 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_src28.ximg exists
[Wed Dec 28 17:43:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_src28.csv
[Wed Dec 28 17:43:55 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_src28_1.ximg exists
[Wed Dec 28 17:43:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_src28.csv
[Wed Dec 28 17:43:55 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 17:43:57 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Wed Dec 28 17:43:57 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Wed Dec 28 17:43:57 2011] Fit fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Thu Dec 29 13:38:40 2011] Warning, spatial fit 28 centroid is now closest to src. 49
[Thu Dec 29 13:38:40 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 13:38:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 13:38:40 2011] Assessing source extent using major axis lower bound
[Thu Dec 29 13:38:40 2011] Source does appear to be extended
[Thu Dec 29 13:38:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 21:58:23 2012] XMMSAS src. selection expression = ellipse(30712.042000, 22251.856000, 1052.184030, 1052.184030, 0.000000, X, Y)
[Sun Jan  1 21:58:23 2012] Writing source region out to fullrun_mos1_xmm0412990101_pi300-10000_pass1_cl_src47_src.reg
[Sun Jan  1 21:58:23 2012] Extracting stamp from image fullrun_mos1_xmm0412990101_pi300-10000_cl_sm2.00.img.gz, (293, 196) - (414, 317)
[Sun Jan  1 21:58:23 2012] XMMSAS bgd. selection expression = annulus(30712.042000, 22251.856000, 1753.640050, 3507.280101, X, Y) && !ellipse(30977.684000, 21604.934000, 2773.424080, 2773.424080, 0.000000, X, Y) && !ellipse(32200.538800, 20646.240000, 1600.128046, 1600.128046, 0.000000, X, Y) && !ellipse(31340.356000, 21143.174000, 1551.680045, 1551.680045, 0.000000, X, Y) && !ellipse(32172.440000, 19913.646000, 1203.480035, 1203.480035, 0.000000, X, Y) && !ellipse(31743.080000, 20608.636000, 1575.008045, 1575.008045, 0.000000, X, Y) && !ellipse(28619.714000, 23582.048000, 1323.808038, 1323.808038, 0.000000, X, Y) && !ellipse(31015.272000, 22193.606000, 992.720029, 992.720029, 0.000000, X, Y) && !ellipse(31975.137600, 21501.196000, 1523.120044, 1523.120044, 0.000000, X, Y) && !ellipse(28173.964935, 22754.120880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30323.206000, 22379.476000, 1287.584037, 1287.584037, 356.371000, X, Y) && !ellipse(29903.788208, 22316.418060, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33061.082000, 18967.998000, 1619.720047, 1619.720047, 0.000000, X, Y) && !ellipse(25617.258000, 21118.642000, 2601.744075, 2601.744075, 0.000000, X, Y) && !ellipse(29115.602936, 22826.319092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28907.660000, 22452.684000, 2793.312080, 2793.312080, 0.000000, X, Y) && !ellipse(29683.038000, 21987.837200, 1419.328041, 1419.328041, 0.000000, X, Y) && !ellipse(34086.075317, 19834.552429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28703.148000, 22749.082000, 1356.088039, 1356.088039, 0.000000, X, Y) && !ellipse(32642.785461, 19703.780289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27654.902000, 23388.820000, 1287.584037, 625.560018, -0.000000, X, Y) && !ellipse(29579.791200, 21942.346200, 1396.656040, 1396.656040, 0.000000, X, Y) && !ellipse(27739.649136, 23451.363998, 2092.320060, 1634.507658, 0.000000, X, Y) && !ellipse(30330.570000, 20630.580000, 1335.312038, 1335.312038, 0.000000, X, Y) && !ellipse(33914.380000, 18354.344000, 1627.408047, 864.736025, 244.716000, X, Y) && !ellipse(33326.748000, 18074.274783, 1283.504037, 336.472405, 86.195420, X, Y) && !ellipse(26213.708000, 24620.084000, 1143.248033, 1143.248033, 0.000000, X, Y) && !ellipse(26964.868000, 19581.132000, 1435.656041, 1435.656041, 0.000000, X, Y) && !ellipse(33501.472000, 19929.913000, 1707.576049, 1707.576049, 0.000000, X, Y) && !ellipse(35676.216000, 17559.648000, 3244.112093, 3244.112093, 0.000000, X, Y) && !ellipse(33667.501984, 19180.045227, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34513.794000, 19601.971800, 1181.872034, 1181.872034, 0.000000, X, Y) && !ellipse(33958.084320, 18061.725647, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34096.272000, 18751.847660, 1738.400050, 1017.472029, 70.169500, X, Y) && !ellipse(35290.192000, 17753.544000, 4051.008117, 4051.008117, 0.000000, X, Y) && !ellipse(34677.956000, 17882.640000, 2536.072073, 2536.072073, 0.000000, X, Y) && !ellipse(35168.415920, 18333.885200, 1622.056047, 1622.056047, 0.000000, X, Y)
[Sun Jan  1 21:58:23 2012] Writing fullrun_mos1_xmm0412990101_pi300-10000_pass1_cl_src47.gif
[Sun Jan  1 23:36:08 2012] Mean detx,y = (3347.85, -5062.77) 
[Sun Jan  1 23:36:10 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan  1 23:37:03 2012] Binned source spectrum to 10 counts/bin
[Sun Jan  1 23:37:03 2012] Setting source spectrum file to fullrun_mos1_xmm0412990101_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Sun Jan  1 23:37:03 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412990101_pi300-10000_pass1_cl_src47_bgd.pi.gz
[Tue Jan  3 09:12:32 2012] Updating aperture counts using extracted products
[Tue Jan  3 09:12:32 2012] Error reading totcts from fullrun_mos1_xmm0412990101_pi300-10000_pass1_cl_src47_src_b10.pi.gz
[Tue Jan  3 09:12:38 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 09:12:38 2012] Using photon index=1.80, rate=0.00657, arf fullrun_mos1_xmm0412990101_pi300-10000_pass1_cl_src47.arf
[Tue Jan  3 09:12:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 09:12:38 2012] Updating source flux to 7.3e-14
[Tue Jan  3 09:12:54 2012] Flag c found in src. 47 procflags, skipping spectral fitting