[Sat Dec 24 00:45:37 2011] Detection parameters: Position = (314.9, 270.9) = 8 49 19.93 -45 35 25.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 253.9 +/- 34.2 Background counts = 385.1 Rate = 0.005 +/- 0.0006 [Sat Dec 24 00:45:41 2011] Off-axis axis estimate = 2.32' [Sat Dec 24 19:47:44 2011] Using EEF radius (= 7.59 ")to estimate initial spatial extent for simple fitting [Sat Dec 24 19:47:44 2011] Initial guess for spatial extent in simple fitting = 7.59" [Sat Dec 24 19:47:44 2011] source mask rpix=1.7, npix_max = 20, mask sum = 16, frac = 0.794 [Sat Dec 24 19:47:44 2011] Giving source the simple spatial ID 28 for pass 0, mean size = 7.59" [Sun Dec 25 08:14:15 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_src28.ximg exists [Sun Dec 25 08:14:15 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_src28_1.ximg exists [Sun Dec 25 08:14:15 2011] Fit fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_src28 appears to have run properly [Sun Dec 25 08:14:17 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src28.ximg exists [Sun Dec 25 08:14:17 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists [Sun Dec 25 08:14:17 2011] Fit fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src28 appears to have run properly [Sun Dec 25 22:25:18 2011] Spatial fit model total counts = 5105.960000, observed total counts = 5098.000000 [Sun Dec 25 22:25:18 2011] Offset between fit and detection position for source 40 = 3.037343 pixels [Sun Dec 25 22:25:18 2011] Warning, changing simple spatial fit ID from 28 to 12 [Sun Dec 25 22:25:18 2011] 5094.670000 total counts/ 4878.950000 bgd. counts: snr = 3.088355 Spatial fit parameters: Offset between fit and detection position for source 40 = 3.037343 pixels Position = (317.5, 269.4) = 8 49 18.83 -45 35 31.7 Extent = 16.1 (10.6-32.2)" x 8.1 (4.8-12.6)", rotation angle = -0 Source counts = 215.7 +/- 71.4 Background counts = 4878.9 Rate = 0.004 +/- 0.001 [Sun Dec 25 22:25:18 2011] Spatial fit model total counts = 5173.990000, observed total counts = 5170.000000 [Sun Dec 25 22:25:18 2011] Offset between fit and detection position for source 40 = 0.715187 pixels [Sun Dec 25 22:25:18 2011] Warning, changing simple spatial fit ID from 12 to 28 [Sun Dec 25 22:25:18 2011] 5144.437000 total counts/ 4523.040000 bgd. counts: snr = 9.239616 Spatial fit parameters: Offset between fit and detection position for source 40 = 0.715187 pixels Position = (318.1, 269.8) = 8 49 18.58 -45 35 30.0 Extent = 15.2 (15.1-30.4)", rotation angle = 0 Source counts = 621.4 +/- 71.7 Background counts = 4523.0 Rate = 0.01 +/- 0.001 [Sun Dec 25 22:25:19 2011] Vigneting correction estimate = 1.000000 [Sun Dec 25 22:25:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun Dec 25 22:25:19 2011] Assessing source extent using major axis lower bound [Sun Dec 25 22:25:19 2011] Source does appear to be extended [Sun Dec 25 22:25:19 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Sun Dec 25 22:25:19 2011] Source is confused with source 44 [Tue Dec 27 08:47:47 2011] Using previous fit value to estimate initial spatial extent for simple fitting [Tue Dec 27 08:47:47 2011] Initial guess for spatial extent in simple fitting = 15.18" [Tue Dec 27 08:47:47 2011] source mask rpix=3.5, npix_max = 63, mask sum = 61, frac = 0.958 [Tue Dec 27 08:47:47 2011] Giving source the simple spatial ID 25 for pass 1, mean size = 15.18" [Wed Dec 28 17:43:55 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_src25.ximg exists [Wed Dec 28 17:43:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_src25.csv [Wed Dec 28 17:43:55 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_src25_1.ximg exists [Wed Dec 28 17:43:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_src25.csv [Wed Dec 28 17:43:55 2011] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_src25_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Dec 28 17:43:57 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src25.ximg exists [Wed Dec 28 17:43:57 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists [Wed Dec 28 17:43:57 2011] Fit fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly [Thu Dec 29 13:38:40 2011] Spatial fit model total counts = 5100.600000, observed total counts = 5098.000000 [Thu Dec 29 13:38:40 2011] Offset between fit and detection position for source 40 = 0.531605 pixels [Thu Dec 29 13:38:40 2011] Warning, changing simple spatial fit ID from 25 to 12 [Thu Dec 29 13:38:40 2011] 4879.610000 total counts/ 4636.620000 bgd. counts: snr = 3.568516 Spatial fit parameters: Offset between fit and detection position for source 40 = 0.531605 pixels Position = (318.4, 269.4) = 8 49 18.46 -45 35 31.9 Extent = 16.1 (12.0-32.2)" x 7.8 (4.9-13.0)", rotation angle = -0 Source counts = 243.0 +/- 69.9 Background counts = 4636.6 Rate = 0.004 +/- 0.001 [Thu Dec 29 13:38:40 2011] Vigneting correction estimate = 1.000000 [Thu Dec 29 13:38:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Dec 29 13:38:40 2011] Assessing source extent using major axis lower bound [Thu Dec 29 13:38:40 2011] Source does appear to be extended [Thu Dec 29 13:38:40 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.92 [Sun Jan 1 21:58:22 2012] XMMSAS src. selection expression = ellipse(27654.902000, 23388.820000, 965.688028, 469.170014, -0.000000, X, Y) [Sun Jan 1 21:58:22 2012] Writing source region out to fullrun_mos1_xmm0412990101_pi300-10000_pass1_cl_src40_src.reg [Sun Jan 1 21:58:22 2012] Extracting stamp from image fullrun_mos1_xmm0412990101_pi300-10000_cl_sm2.00.img.gz, (263, 214) - (374, 325) [Sun Jan 1 21:58:23 2012] XMMSAS bgd. selection expression = annulus(27654.902000, 23388.820000, 1609.480046, 3218.960093, X, Y) && !ellipse(30977.684000, 21604.934000, 2773.424080, 2773.424080, 0.000000, X, Y) && !ellipse(32200.538800, 20646.240000, 1600.128046, 1600.128046, 0.000000, X, Y) && !ellipse(31340.356000, 21143.174000, 1551.680045, 1551.680045, 0.000000, X, Y) && !ellipse(31743.080000, 20608.636000, 1575.008045, 1575.008045, 0.000000, X, Y) && !ellipse(28619.714000, 23582.048000, 1323.808038, 1323.808038, 0.000000, X, Y) && !ellipse(31015.272000, 22193.606000, 992.720029, 992.720029, 0.000000, X, Y) && !ellipse(31975.137600, 21501.196000, 1523.120044, 1523.120044, 0.000000, X, Y) && !ellipse(25458.962200, 21711.374000, 1302.568037, 1302.568037, 0.000000, X, Y) && !ellipse(28173.964935, 22754.120880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30323.206000, 22379.476000, 1287.584037, 1287.584037, 356.371000, X, Y) && !ellipse(29903.788208, 22316.418060, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25617.258000, 21118.642000, 2601.744075, 2601.744075, 0.000000, X, Y) && !ellipse(29115.602936, 22826.319092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28907.660000, 22452.684000, 2793.312080, 2793.312080, 0.000000, X, Y) && !ellipse(29683.038000, 21987.837200, 1419.328041, 1419.328041, 0.000000, X, Y) && !ellipse(28703.148000, 22749.082000, 1356.088039, 1356.088039, 0.000000, X, Y) && !ellipse(29579.791200, 21942.346200, 1396.656040, 1396.656040, 0.000000, X, Y) && !ellipse(24377.621800, 22626.410800, 930.768027, 930.768027, 0.000000, X, Y) && !ellipse(30712.042000, 22251.856000, 1402.912040, 1402.912040, 0.000000, X, Y) && !ellipse(26513.554600, 22066.812200, 544.376816, 178.192005, 309.601000, X, Y) && !ellipse(25936.646000, 24132.838400, 1147.320033, 1147.320033, 0.000000, X, Y) && !ellipse(27739.649136, 23451.363998, 2092.320060, 1634.507658, 0.000000, X, Y) && !ellipse(30330.570000, 20630.580000, 1335.312038, 1335.312038, 0.000000, X, Y) && !ellipse(26213.708000, 24620.084000, 1143.248033, 1143.248033, 0.000000, X, Y) && !ellipse(24240.574000, 24591.674000, 1175.344034, 1175.344034, 0.000000, X, Y) && !ellipse(23748.904602, 25610.061554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26964.868000, 19581.132000, 1435.656041, 1435.656041, 0.000000, X, Y) && !ellipse(23896.680000, 24812.198400, 1163.904033, 1163.904033, 0.000000, X, Y) && !ellipse(23459.502000, 23325.108000, 2567.008074, 2567.008074, 0.000000, X, Y) [Sun Jan 1 21:58:23 2012] Writing fullrun_mos1_xmm0412990101_pi300-10000_pass1_cl_src40.gif [Sun Jan 1 23:33:45 2012] Mean detx,y = (1445.90, -2449.99) [Sun Jan 1 23:33:48 2012] Setting backscal keywords in source and bgd. spectrum [Sun Jan 1 23:34:06 2012] Binned source spectrum to 10 counts/bin [Sun Jan 1 23:34:09 2012] Setting source spectrum file to fullrun_mos1_xmm0412990101_pi300-10000_pass1_cl_src40_src_b10.pi.gz [Sun Jan 1 23:34:09 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412990101_pi300-10000_pass1_cl_src40_bgd.pi.gz [Tue Jan 3 09:12:32 2012] Updating aperture counts using extracted products [Tue Jan 3 09:12:32 2012] Error reading totcts from fullrun_mos1_xmm0412990101_pi300-10000_pass1_cl_src40_src_b10.pi.gz [Tue Jan 3 09:12:37 2012] Calculating source flux in energy range 0.30-8.00 [Tue Jan 3 09:12:37 2012] Using photon index=1.80, rate=0.004, arf fullrun_mos1_xmm0412990101_pi300-10000_pass1_cl_src40.arf [Tue Jan 3 09:12:37 2012] Assuming count rate is from the 0.30-10.00 bandpass [Tue Jan 3 09:12:37 2012] Updating source flux to 4.7e-14 [Tue Jan 3 09:12:54 2012] Flag c found in src. 40 procflags, skipping spectral fitting