[Sat Dec 24 00:45:36 2011] Detection parameters:
  Position = (266.0, 294.0) = 8 49 40.18 -45 33 45.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 206.3 +/- 31.7
  Background counts = 344.1
  Rate = 0.004 +/- 0.0006

[Sat Dec 24 00:45:41 2011] Off-axis axis estimate = 2.37'
[Sat Dec 24 19:47:44 2011] Using EEF radius (= 7.62 ")to estimate initial spatial extent for simple fitting
[Sat Dec 24 19:47:44 2011] Initial guess for spatial extent in simple fitting = 7.62"
[Sat Dec 24 19:47:44 2011] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.790
[Sat Dec 24 19:47:44 2011] Giving source the simple spatial ID 43 for pass 0, mean size = 7.62"
[Sun Dec 25 08:14:15 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_src43.ximg exists
[Sun Dec 25 08:14:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_src43.csv
[Sun Dec 25 08:14:15 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_src43_1.ximg exists
[Sun Dec 25 08:14:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_src43.csv
[Sun Dec 25 08:14:15 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 08:14:18 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Sun Dec 25 08:14:18 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Sun Dec 25 08:14:18 2011] Fit fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly
[Sun Dec 25 22:25:18 2011] Warning, spatial fit 43 centroid is now closest to src. 18
[Sun Dec 25 22:25:19 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 22:25:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 22:25:19 2011] Assessing source extent using major
[Sun Dec 25 22:25:19 2011] Source does appear to be extended
[Sun Dec 25 22:25:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 08:47:47 2011] Using EEF radius (= 7.62 ")to estimate initial spatial extent for simple fitting
[Tue Dec 27 08:47:47 2011] Initial guess for spatial extent in simple fitting = 7.62"
[Tue Dec 27 08:47:47 2011] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.790
[Tue Dec 27 08:47:47 2011] Giving source the simple spatial ID 39 for pass 1, mean size = 7.62"
[Wed Dec 28 17:43:55 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_src39.ximg exists
[Wed Dec 28 17:43:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_src39.csv
[Wed Dec 28 17:43:55 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_src39_1.ximg exists
[Wed Dec 28 17:43:55 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_src39.csv
[Wed Dec 28 17:43:55 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 17:43:58 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Wed Dec 28 17:43:58 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Wed Dec 28 17:43:58 2011] Fit fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src39 appears to have run properly
[Thu Dec 29 13:38:40 2011] Spatial fit model total counts = 4648.100000, observed total counts = 4642.000000
[Thu Dec 29 13:38:40 2011] Offset between fit and detection position for source 29 = 1.790930 pixels
[Thu Dec 29 13:38:40 2011] 4656.023000 total counts/ 4380.570000 bgd. counts: snr = 4.161809
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 1.790930 pixels
  Position = (265.7, 292.2) = 8 49 40.29 -45 33 52.7
  Extent = 15.2 (15.2-30.5)", rotation angle = 0
  Source counts = 275.5 +/- 68.2
  Background counts = 4380.6
  Rate = 0.005 +/- 0.001
[Thu Dec 29 13:38:40 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 13:38:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 13:38:40 2011] Assessing source extent using major axis lower bound
[Thu Dec 29 13:38:40 2011] Source does appear to be extended
[Thu Dec 29 13:38:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 13:38:40 2011] Source is confused with source 22
[Thu Dec 29 13:38:40 2011] Source is confused with source 27
[Sun Jan  1 21:58:23 2012] XMMSAS src. selection expression = ellipse(23070.869200, 25372.584000, 913.854026, 913.854026, 0.000000, X, Y)
[Sun Jan  1 21:58:23 2012] Writing source region out to fullrun_mos1_xmm0412990101_pi300-10000_pass1_cl_src29_src.reg
[Sun Jan  1 21:58:23 2012] Extracting stamp from image fullrun_mos1_xmm0412990101_pi300-10000_cl_sm2.00.img.gz, (213, 240) - (318, 345)
[Sun Jan  1 21:58:23 2012] XMMSAS bgd. selection expression = annulus(23070.869200, 25372.584000, 1523.090044, 3046.180088, X, Y) && !ellipse(19677.410400, 27947.666820, 475.005614, 323.428009, 136.178000, X, Y) && !ellipse(25458.962200, 21711.374000, 1302.568037, 1302.568037, 0.000000, X, Y) && !ellipse(25617.258000, 21118.642000, 2601.744075, 2601.744075, 0.000000, X, Y) && !ellipse(28907.660000, 22452.684000, 2793.312080, 2793.312080, 0.000000, X, Y) && !ellipse(24377.621800, 22626.410800, 930.768027, 930.768027, 0.000000, X, Y) && !ellipse(26513.554600, 22066.812200, 544.376816, 178.192005, 309.601000, X, Y) && !ellipse(25936.646000, 24132.838400, 1147.320033, 1147.320033, 0.000000, X, Y) && !ellipse(27739.649136, 23451.363998, 2092.320060, 1634.507658, 0.000000, X, Y) && !ellipse(21370.396000, 26904.224000, 1813.328052, 1813.328052, 0.000000, X, Y) && !ellipse(22841.851013, 26220.752808, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20894.831400, 27164.264800, 916.448026, 916.448026, 0.000000, X, Y) && !ellipse(26213.708000, 24620.084000, 1143.248033, 1143.248033, 0.000000, X, Y) && !ellipse(24240.574000, 24591.674000, 1175.344034, 1175.344034, 0.000000, X, Y) && !ellipse(23748.904602, 25610.061554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23896.680000, 24812.198400, 1163.904033, 1163.904033, 0.000000, X, Y) && !ellipse(21739.960754, 25819.705322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23459.502000, 23325.108000, 2567.008074, 2567.008074, 0.000000, X, Y) && !ellipse(22042.642059, 26046.813873, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jan  1 21:58:23 2012] Writing fullrun_mos1_xmm0412990101_pi300-10000_pass1_cl_src29.gif
[Sun Jan  1 23:58:17 2012] Mean detx,y = (-1561.54, 1508.40) 
[Sun Jan  1 23:58:20 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan  1 23:58:35 2012] Binned source spectrum to 10 counts/bin
[Sun Jan  1 23:58:36 2012] Setting source spectrum file to fullrun_mos1_xmm0412990101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sun Jan  1 23:58:36 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412990101_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Tue Jan  3 09:12:33 2012] Updating aperture counts using extracted products
[Tue Jan  3 09:12:33 2012] Error reading totcts from fullrun_mos1_xmm0412990101_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Tue Jan  3 09:12:38 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 09:12:38 2012] Using photon index=1.80, rate=0.00454, arf fullrun_mos1_xmm0412990101_pi300-10000_pass1_cl_src29.arf
[Tue Jan  3 09:12:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 09:12:38 2012] Updating source flux to 4.2e-14
[Tue Jan  3 09:12:54 2012] Flag c found in src. 29 procflags, skipping spectral fitting