[Sat Dec 24 00:45:36 2011] Detection parameters:
  Position = (263.1, 301.9) = 8 49 41.38 -45 33 10.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 182.0 +/- 29.8
  Background counts = 321.6
  Rate = 0.003 +/- 0.0005

[Sat Dec 24 00:45:41 2011] Off-axis axis estimate = 2.57'
[Sat Dec 24 19:47:44 2011] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Sat Dec 24 19:47:44 2011] Initial guess for spatial extent in simple fitting = 7.72"
[Sat Dec 24 19:47:44 2011] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.774
[Sat Dec 24 19:47:44 2011] Giving source the simple spatial ID 51 for pass 0, mean size = 7.72"
[Sun Dec 25 08:14:15 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_src51.ximg exists
[Sun Dec 25 08:14:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_src51.csv
[Sun Dec 25 08:14:15 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_src51_1.ximg exists
[Sun Dec 25 08:14:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_src51.csv
[Sun Dec 25 08:14:15 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 25 08:14:18 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Sun Dec 25 08:14:18 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Sun Dec 25 08:14:18 2011] Fit fullrun_mos1_xmm0412990101_pi300-10000_cl_pass0_tfrozen_src51 appears to have run properly
[Sun Dec 25 22:25:18 2011] Source 22 is offset by -5.887184 and -5.032634 pixels which is larger than
2 X fitted extent = 1.197140 x 1.197140, not incorporating fit results
[Sun Dec 25 22:25:18 2011] Source 22 is offset by -5.923304 and -5.093883 pixels which is larger than
2 X fitted extent = 1.272920 x 1.272920, not incorporating fit results
[Sun Dec 25 22:25:19 2011] Vigneting correction estimate = 1.000000
[Sun Dec 25 22:25:19 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 25 22:25:19 2011] Assessing source extent using major
[Sun Dec 25 22:25:19 2011] Source does appear to be extended
[Sun Dec 25 22:25:19 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Dec 27 08:47:47 2011] Using EEF radius (= 7.72 ")to estimate initial spatial extent for simple fitting
[Tue Dec 27 08:47:47 2011] Initial guess for spatial extent in simple fitting = 7.72"
[Tue Dec 27 08:47:47 2011] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.774
[Tue Dec 27 08:47:47 2011] Giving source the simple spatial ID 45 for pass 1, mean size = 7.72"
[Wed Dec 28 17:43:56 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_src45.ximg exists
[Wed Dec 28 17:43:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_src45.csv
[Wed Dec 28 17:43:56 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_src45_1.ximg exists
[Wed Dec 28 17:43:56 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_src45.csv
[Wed Dec 28 17:43:56 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 17:43:58 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src45.ximg exists
[Wed Dec 28 17:43:58 2011] fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists
[Wed Dec 28 17:43:58 2011] Fit fullrun_mos1_xmm0412990101_pi300-10000_cl_pass1_tfrozen_src45 appears to have run properly
[Thu Dec 29 13:38:40 2011] Warning: source 37 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 22 at 15.140773 pixels away
[Thu Dec 29 13:38:40 2011] Source 22 is offset by -5.800080 and -5.088037 pixels which is larger than
2 X fitted extent = 1.236455 x 1.236455, not incorporating fit results
[Thu Dec 29 13:38:40 2011] Vigneting correction estimate = 1.000000
[Thu Dec 29 13:38:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Dec 29 13:38:40 2011] Assessing source extent using major
[Thu Dec 29 13:38:40 2011] Source does appear to be extended
[Thu Dec 29 13:38:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Dec 29 13:38:40 2011] Source is confused with source 29
[Sun Jan  1 21:58:23 2012] XMMSAS src. selection expression = ellipse(22841.851013, 26220.752808, 652.500000, 652.500000, 0.000000, X, Y)
[Sun Jan  1 21:58:23 2012] Writing source region out to fullrun_mos1_xmm0412990101_pi300-10000_pass1_cl_src22_src.reg
[Sun Jan  1 21:58:23 2012] Extracting stamp from image fullrun_mos1_xmm0412990101_pi300-10000_cl_sm2.00.img.gz, (226, 264) - (301, 339)
[Sun Jan  1 21:58:23 2012] XMMSAS bgd. selection expression = annulus(22841.851013, 26220.752808, 1087.500000, 2175.000000, X, Y) && !ellipse(25936.646000, 24132.838400, 1147.320033, 1147.320033, 0.000000, X, Y) && !ellipse(21370.396000, 26904.224000, 1813.328052, 1813.328052, 0.000000, X, Y) && !ellipse(23070.869200, 25372.584000, 1218.472035, 1218.472035, 0.000000, X, Y) && !ellipse(20894.831400, 27164.264800, 916.448026, 916.448026, 0.000000, X, Y) && !ellipse(24240.574000, 24591.674000, 1175.344034, 1175.344034, 0.000000, X, Y) && !ellipse(23748.904602, 25610.061554, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23896.680000, 24812.198400, 1163.904033, 1163.904033, 0.000000, X, Y) && !ellipse(21739.960754, 25819.705322, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23459.502000, 23325.108000, 2567.008074, 2567.008074, 0.000000, X, Y) && !ellipse(22042.642059, 26046.813873, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jan  1 21:58:23 2012] Writing fullrun_mos1_xmm0412990101_pi300-10000_pass1_cl_src22.gif
[Mon Jan  2 00:08:07 2012] Mean detx,y = (-2413.30, 1550.82) 
[Mon Jan  2 00:08:10 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jan  2 00:08:23 2012] Binned source spectrum to 10 counts/bin
[Mon Jan  2 00:08:23 2012] Setting source spectrum file to fullrun_mos1_xmm0412990101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Mon Jan  2 00:08:23 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412990101_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Mon Jan  2 18:59:40 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jan  2 18:59:40 2012] rmf not generated due to insufficient counts
[Tue Jan  3 09:12:33 2012] Updating aperture counts using extracted products
[Tue Jan  3 09:12:33 2012] Error reading totcts from fullrun_mos1_xmm0412990101_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Tue Jan  3 09:12:39 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jan  3 09:12:39 2012] Using photon index=1.80, rate=0.00323, arf fullrun_mos1_xmm0412990101_pi300-10000_pass1_cl_src22.arf
[Tue Jan  3 09:12:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jan  3 09:12:39 2012] Updating source flux to 3.2e-14
[Tue Jan  3 09:12:54 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting