[Thu Jul 19 18:12:23 2012] Detection parameters:
  Position = (253.2, 147.9) = 1 5 10.04 -72 11 47.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 337.7 +/- 22.8
  Background counts = 12.8
  Rate = 0.01 +/- 0.0008

[Thu Jul 19 18:12:24 2012] Off-axis axis estimate = 11.40'
[Thu Jul 19 19:34:12 2012] Using EEF radius (= 12.13 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 19:34:12 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jul 19 19:34:12 2012] Initial guess for spatial extent in simple fitting = 12.13"
[Thu Jul 19 19:34:12 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.971
[Thu Jul 19 19:34:12 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 12.13"
[Thu Jul 19 19:58:50 2012] fullrun_mos2_xmm0412981501_pi300-10000_cl_pass0_src4.ximg exists
[Thu Jul 19 19:58:50 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0412981501_pi300-10000_cl_pass0_src4.csv
[Thu Jul 19 19:58:50 2012] fullrun_mos2_xmm0412981501_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu Jul 19 19:58:50 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0412981501_pi300-10000_cl_pass0_src4.csv
[Thu Jul 19 19:58:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412981501_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412981501_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 19:58:50 2012] fullrun_mos2_xmm0412981501_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu Jul 19 19:58:50 2012] fullrun_mos2_xmm0412981501_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu Jul 19 19:58:50 2012] Fit fullrun_mos2_xmm0412981501_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Thu Jul 19 19:58:57 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 15.726653 pixels away
[Thu Jul 19 19:58:57 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 19:58:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 19:58:57 2012] Assessing source extent using major
[Thu Jul 19 19:58:57 2012] Source does appear to be extended
[Thu Jul 19 19:58:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 22:20:51 2012] Using EEF radius (= 12.13 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 22:20:51 2012] Initial guess for spatial extent in simple fitting = 12.13"
[Thu Jul 19 22:20:51 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.971
[Thu Jul 19 22:20:51 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 12.13"
[Thu Jul 19 22:45:37 2012] fullrun_mos2_xmm0412981501_pi300-10000_cl_pass1_src4.ximg exists
[Thu Jul 19 22:45:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412981501_pi300-10000_cl_pass1_src4.csv
[Thu Jul 19 22:45:37 2012] fullrun_mos2_xmm0412981501_pi300-10000_cl_pass1_src4_1.ximg exists
[Thu Jul 19 22:45:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412981501_pi300-10000_cl_pass1_src4.csv
[Thu Jul 19 22:45:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412981501_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412981501_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 22:45:37 2012] fullrun_mos2_xmm0412981501_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Thu Jul 19 22:45:37 2012] fullrun_mos2_xmm0412981501_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Thu Jul 19 22:45:37 2012] Fit fullrun_mos2_xmm0412981501_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Thu Jul 19 22:45:43 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 15.089932 pixels away
[Thu Jul 19 22:45:43 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 22:45:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 22:45:43 2012] Assessing source extent using major
[Thu Jul 19 22:45:43 2012] Source does appear to be extended
[Thu Jul 19 22:45:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 20 01:04:09 2012] XMMSAS src. selection expression = ellipse(21981.503372, 12817.348495, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul 20 01:04:09 2012] Writing source region out to fullrun_mos2_xmm0412981501_pi300-10000_pass1_cl_src4_src.reg
[Fri Jul 20 01:04:09 2012] Extracting stamp from image fullrun_mos2_xmm0412981501_pi300-10000_cl_sm2.00.img.gz, (216, 110) - (291, 185)
[Fri Jul 20 01:04:09 2012] XMMSAS bgd. selection expression = annulus(21981.503372, 12817.348495, 1087.500000, 2175.000000, X, Y) && !ellipse(19531.500400, 15162.488740, 669.868572, 669.868572, 0.000000, X, Y)
[Fri Jul 20 01:04:09 2012] Writing fullrun_mos2_xmm0412981501_pi300-10000_pass1_cl_src4.gif
[Fri Jul 20 01:14:54 2012] Mean detx,y = (-8796.83, -10948.33) 
[Fri Jul 20 01:14:55 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 20 01:15:03 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 20 01:15:03 2012] Setting source spectrum file to fullrun_mos2_xmm0412981501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jul 20 01:15:03 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412981501_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Jul 20 02:07:06 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jul 20 02:07:06 2012] rmf not generated due to insufficient counts
[Fri Jul 20 02:08:09 2012] Updating aperture counts using extracted products
[Fri Jul 20 02:08:09 2012] Error reading totcts from fullrun_mos2_xmm0412981501_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jul 20 02:08:09 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 02:08:09 2012] Using photon index=1.80, rate=0.0113, arf fullrun_mos2_xmm0412981501_pi300-10000_pass1_cl_src4.arf
[Fri Jul 20 02:08:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 02:08:09 2012] Updating source flux to 2.3e-13
[Fri Jul 20 02:09:07 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting