[Thu Jul 19 18:12:01 2012] Detection parameters:
  Position = (324.2, 282.9) = 1 4 2.97 -72 1 59.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 62565.1 +/- 289.2
  Background counts = 31.9
  Rate = 2 +/- 0.01

[Thu Jul 19 18:12:02 2012] Off-axis axis estimate = 2.18'
[Thu Jul 19 18:13:12 2012] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 18:13:12 2012] Initial guess for spatial extent in simple fitting = 7.52"
[Thu Jul 19 18:13:12 2012] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.705
[Thu Jul 19 18:13:12 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.52"
[Thu Jul 19 19:34:11 2012] fullrun_mos1_xmm0412981501_pi300-10000_cl_pass0_src1.ximg exists
[Thu Jul 19 19:34:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412981501_pi300-10000_cl_pass0_src1.csv
[Thu Jul 19 19:34:11 2012] fullrun_mos1_xmm0412981501_pi300-10000_cl_pass0_src1_1.ximg exists
[Thu Jul 19 19:34:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412981501_pi300-10000_cl_pass0_src1.csv
[Thu Jul 19 19:34:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412981501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412981501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 19:34:12 2012] fullrun_mos1_xmm0412981501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Thu Jul 19 19:34:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412981501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Jul 19 19:34:12 2012] fullrun_mos1_xmm0412981501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Thu Jul 19 19:34:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412981501_pi300-10000_cl_pass0_tfrozen_src1.csv
[Thu Jul 19 19:34:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412981501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412981501_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 19:58:54 2012] Spatial fit model total counts = 103023.000000, observed total counts = 90860.000000
[Thu Jul 19 19:58:54 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jul 19 19:58:54 2012] Spatial fit model total counts = 96356.700000, observed total counts = 85737.000000
[Thu Jul 19 19:58:54 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jul 19 19:58:54 2012] Source 1 is offset by 4.407660 and 0.455798 pixels which is larger than
2 X fitted extent = 2.285189 x 3.598439, not incorporating fit results
[Thu Jul 19 19:58:54 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 19:58:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 19:58:54 2012] Assessing source extent using major
[Thu Jul 19 19:58:54 2012] Source does appear to be extended
[Thu Jul 19 19:58:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 19:58:54 2012] Source is confused with source 2
[Thu Jul 19 19:58:54 2012] Source is confused with source 3
[Thu Jul 19 19:59:01 2012] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting
[Thu Jul 19 19:59:01 2012] Initial guess for spatial extent in simple fitting = 7.52"
[Thu Jul 19 19:59:01 2012] source mask rpix=1.7, npix_max = 19, mask sum = 14, frac = 0.705
[Thu Jul 19 19:59:01 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 7.52"
[Thu Jul 19 22:20:51 2012] fullrun_mos1_xmm0412981501_pi300-10000_cl_pass1_src1.ximg exists
[Thu Jul 19 22:20:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412981501_pi300-10000_cl_pass1_src1.csv
[Thu Jul 19 22:20:51 2012] fullrun_mos1_xmm0412981501_pi300-10000_cl_pass1_src1_1.ximg exists
[Thu Jul 19 22:20:51 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412981501_pi300-10000_cl_pass1_src1.csv
[Thu Jul 19 22:20:51 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412981501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412981501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jul 19 22:20:51 2012] fullrun_mos1_xmm0412981501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Thu Jul 19 22:20:51 2012] fullrun_mos1_xmm0412981501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Thu Jul 19 22:20:51 2012] Fit fullrun_mos1_xmm0412981501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Thu Jul 19 22:45:40 2012] Spatial fit model total counts = 97835.600000, observed total counts = 90860.000000
[Thu Jul 19 22:45:40 2012] Offset between fit and detection position for source 1 = 1.057425 pixels
[Thu Jul 19 22:45:40 2012] 95829.662275 total counts/ 0.062275 bgd. counts: snr = 384010.241654
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.057425 pixels
  Position = (324.6, 283.9) = 1 4 2.55 -72 1 55.6
  Extent = 12.8 (12.8-12.8)", rotation angle = 0
  Source counts = 95829.6 +/- 309.6
  Background counts = 0.1
  Rate = 3 +/- 0.01
[Thu Jul 19 22:45:40 2012] Spatial fit model total counts = 103612.000000, observed total counts = 90165.000000
[Thu Jul 19 22:45:40 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Jul 19 22:45:40 2012] Vigneting correction estimate = 1.000000
[Thu Jul 19 22:45:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jul 19 22:45:40 2012] Assessing source extent using major axis lower bound
[Thu Jul 19 22:45:40 2012] Source does appear to be extended
[Thu Jul 19 22:45:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jul 19 22:45:46 2012] Counts = 95829.600000, rescaling region sizes by 3.000000
[Thu Jul 19 22:45:46 2012] XMMSAS src. selection expression = ellipse(28192.704600, 24650.912760, 2307.384066, 2307.384066, 0.000000, X, Y)
[Thu Jul 19 22:45:46 2012] Writing source region out to fullrun_mos1_xmm0412981501_pi300-10000_pass1_cl_src1_src.reg
[Thu Jul 19 22:45:46 2012] Extracting stamp from image fullrun_mos1_xmm0412981501_pi300-10000_cl_sm2.00.img.gz, (192, 151) - (457, 417)
[Thu Jul 19 22:45:46 2012] XMMSAS bgd. selection expression = annulus(28192.704600, 24650.912760, 11536.920332, 23073.840664, X, Y) && !ellipse(27921.230042, 25254.988556, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(28087.346000, 24754.494000, 2240.772064, 2240.772064, 0.000000, X, Y) && !ellipse(30482.340560, 25097.057800, 383.887211, 383.887211, 0.000000, X, Y) && !ellipse(28968.272705, 25016.280182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41600.981750, 21696.131531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28433.103760, 25377.103973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29392.833130, 25281.156525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27202.110046, 24121.126434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22009.067400, 12799.244200, 543.080016, 543.080016, 0.000000, X, Y)
[Thu Jul 19 22:45:46 2012] Writing fullrun_mos1_xmm0412981501_pi300-10000_pass1_cl_src1.gif
[Thu Jul 19 22:45:53 2012] Mean detx,y = (70.83, 739.72) 
[Thu Jul 19 22:45:55 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Jul 19 22:53:12 2012] Binned source spectrum to 10 counts/bin
[Thu Jul 19 22:53:12 2012] Setting source spectrum file to fullrun_mos1_xmm0412981501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Thu Jul 19 22:53:12 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412981501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Fri Jul 20 02:08:09 2012] Updating aperture counts using extracted products
[Fri Jul 20 02:08:09 2012] Error reading totcts from fullrun_mos1_xmm0412981501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jul 20 02:08:09 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 02:08:09 2012] Using photon index=1.80, rate=3.2, arf fullrun_mos1_xmm0412981501_pi300-10000_pass1_cl_src1.arf
[Fri Jul 20 02:08:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 02:08:09 2012] Updating source flux to 2.9e-11
[Fri Jul 20 02:08:10 2012] Flag b found in src. 1 procflags, skipping spectral fitting
[Fri Jul 20 02:08:10 2012] Flag p found in src. 1 procflags, skipping spectral fitting
[Fri Jul 20 02:08:10 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Fri Jul 20 02:09:07 2012] Reading fit data from xmm0412981501/analysis//spectral/fullrun_mos1_xmm0412981501_pi300-10000_pass1_cl_src1_pl.csv
[Fri Jul 20 02:09:07 2012] Spectral fit parameter nH value = 7.36359e+21
[Fri Jul 20 02:09:07 2012] Spectral fit parameter PhoIndex value = 7.60158
[Fri Jul 20 02:09:07 2012] Failed to get F(0.3-8.0) from xmm0412981501/analysis//spectral/fullrun_mos1_xmm0412981501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Fri Jul 20 02:09:07 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 20 02:09:07 2012] Using Nh = 7.4e+21, photon index=7.60, rate=3.2, arf fullrun_mos1_xmm0412981501_pi300-10000_pass1_cl_src1.arf
[Fri Jul 20 02:09:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 20 02:09:07 2012] Updating source flux to 1.7e-11