[Sat Apr  7 08:17:14 2012] Detection parameters:
  Position = (280.7, 293.2) = 1 4 0.14 -72 1 52.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 64831.8 +/- 299.8
  Background counts = 49.7
  Rate = 2 +/- 0.009

[Sat Apr  7 08:17:14 2012] Off-axis axis estimate = 1.34'
[Sat Apr  7 08:35:03 2012] Using EEF radius (= 7.10 ")to estimate initial spatial extent for simple fitting
[Sat Apr  7 08:35:03 2012] Initial guess for spatial extent in simple fitting = 7.10"
[Sat Apr  7 08:35:03 2012] source mask rpix=1.6, npix_max = 18, mask sum = 13, frac = 0.715
[Sat Apr  7 08:35:03 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.10"
[Sat Apr  7 08:52:23 2012] fullrun_mos1_xmm0412981401_pi300-10000_cl_pass0_src1.ximg exists
[Sat Apr  7 08:52:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412981401_pi300-10000_cl_pass0_src1.csv
[Sat Apr  7 08:52:23 2012] fullrun_mos1_xmm0412981401_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Apr  7 08:52:23 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412981401_pi300-10000_cl_pass0_src1.csv
[Sat Apr  7 08:52:23 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412981401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412981401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Apr  7 08:52:23 2012] fullrun_mos1_xmm0412981401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Apr  7 08:52:23 2012] fullrun_mos1_xmm0412981401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Apr  7 08:52:23 2012] Fit fullrun_mos1_xmm0412981401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Apr  7 09:19:09 2012] Spatial fit model total counts = 109342.000000, observed total counts = 107281.000000
[Sat Apr  7 09:19:09 2012] Offset between fit and detection position for source 2 = 1.841233 pixels
[Sat Apr  7 09:19:09 2012] 109409.460000 total counts/ 4659.460000 bgd. counts: snr = 1534.568353
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.841233 pixels
  Position = (278.8, 292.9) = 1 4 1.85 -72 1 53.0
  Extent = 13.2 (13.1-13.3)", rotation angle = 0
  Source counts = 104750.0 +/- 330.8
  Background counts = 4659.5
  Rate = 3 +/- 0.01
[Sat Apr  7 09:19:09 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 09:19:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 09:19:09 2012] Assessing source extent using major axis lower bound
[Sat Apr  7 09:19:09 2012] Source does appear to be extended
[Sat Apr  7 09:19:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Apr  7 09:19:09 2012] Source is confused with source 1
[Sat Apr  7 10:12:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Apr  7 10:12:57 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Apr  7 10:12:57 2012] Initial guess for spatial extent in simple fitting = 13.19"
[Sat Apr  7 10:12:57 2012] source mask rpix=3.0, npix_max = 49, mask sum = 31, frac = 0.621
[Sat Apr  7 10:12:57 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 13.19"
[Sat Apr  7 11:01:39 2012] fullrun_mos1_xmm0412981401_pi300-10000_cl_pass1_src1.ximg exists
[Sat Apr  7 11:01:39 2012] fullrun_mos1_xmm0412981401_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Apr  7 11:01:39 2012] Fit fullrun_mos1_xmm0412981401_pi300-10000_cl_pass1_src1 appears to have run properly
[Sat Apr  7 11:01:39 2012] fullrun_mos1_xmm0412981401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Apr  7 11:01:39 2012] fullrun_mos1_xmm0412981401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Apr  7 11:01:39 2012] Fit fullrun_mos1_xmm0412981401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Apr  7 11:32:09 2012] Spatial fit model total counts = 120591.000000, observed total counts = 118431.000000
[Sat Apr  7 11:32:09 2012] Offset between fit and detection position for source 2 = 0.011369 pixels
[Sat Apr  7 11:32:09 2012] 120610.300000 total counts/ 13151.300000 bgd. counts: snr = 937.040695
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.011369 pixels
  Position = (278.8, 292.9) = 1 4 1.85 -72 1 53.1
  Extent = 13.3 (13.2-13.4)", rotation angle = 0
  Source counts = 107459.0 +/- 347.3
  Background counts = 13151.3
  Rate = 3 +/- 0.01
[Sat Apr  7 11:32:09 2012] Vigneting correction estimate = 1.000000
[Sat Apr  7 11:32:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Apr  7 11:32:09 2012] Assessing source extent using major axis lower bound
[Sat Apr  7 11:32:09 2012] Source does appear to be extended
[Sat Apr  7 11:32:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Apr  9 01:55:17 2012] Counts = 107459.000000, rescaling region sizes by 3.000000
[Mon Apr  9 01:55:17 2012] XMMSAS src. selection expression = ellipse(24210.982800, 25431.019200, 2395.188069, 2395.188069, 0.000000, X, Y)
[Mon Apr  9 01:55:17 2012] Writing source region out to fullrun_mos1_xmm0412981401_pi300-10000_pass1_cl_src2_src.reg
[Mon Apr  9 01:55:17 2012] Extracting stamp from image fullrun_mos1_xmm0412981401_pi300-10000_cl_sm2.00.img.gz, (141, 155) - (416, 431)
[Mon Apr  9 01:55:17 2012] XMMSAS bgd. selection expression = annulus(24210.982800, 25431.019200, 11975.940345, 23951.880689, X, Y) && !ellipse(24306.172000, 25283.898320, 3447.792099, 3447.792099, 0.000000, X, Y) && !ellipse(26441.467200, 25804.656600, 387.604011, 387.604011, 0.000000, X, Y) && !ellipse(37551.493896, 22414.176239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13698.139862, 23018.006897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11951.564682, 21177.598999, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Apr  9 01:55:17 2012] Writing fullrun_mos1_xmm0412981401_pi300-10000_pass1_cl_src2.gif
[Mon Apr  9 01:55:25 2012] Mean detx,y = (333.04, -1176.22) 
[Mon Apr  9 01:55:26 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Apr  9 02:01:18 2012] Binned source spectrum to 10 counts/bin
[Mon Apr  9 02:01:18 2012] Setting source spectrum file to fullrun_mos1_xmm0412981401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Apr  9 02:01:18 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412981401_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon Apr  9 09:25:56 2012] Updating aperture counts using extracted products
[Mon Apr  9 09:25:56 2012] Error reading totcts from fullrun_mos1_xmm0412981401_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Apr  9 09:25:56 2012] Calculating source flux in energy range 0.30-8.00
[Mon Apr  9 09:25:56 2012] Using photon index=1.80, rate=3.23, arf fullrun_mos1_xmm0412981401_pi300-10000_pass1_cl_src2.arf
[Mon Apr  9 09:25:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Apr  9 09:25:56 2012] Updating source flux to 3.3e-11
[Mon Apr  9 09:25:57 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Mon Apr  9 09:26:46 2012] Reading fit data from xmm0412981401/analysis//spectral/fullrun_mos1_xmm0412981401_pi300-10000_pass1_cl_src2_pl.csv
[Mon Apr  9 09:26:46 2012] Spectral fit parameter nH value = 7.28782e+21
[Mon Apr  9 09:26:46 2012] Spectral fit parameter PhoIndex value = 7.44172
[Mon Apr  9 09:26:46 2012] Failed to get F(0.3-8.0) from xmm0412981401/analysis//spectral/fullrun_mos1_xmm0412981401_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Mon Apr  9 09:26:46 2012] Calculating source flux in energy range 0.30-8.00
[Mon Apr  9 09:26:46 2012] Using Nh = 7.3e+21, photon index=7.44, rate=3.23, arf fullrun_mos1_xmm0412981401_pi300-10000_pass1_cl_src2.arf
[Mon Apr  9 09:26:46 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Apr  9 09:26:46 2012] Updating source flux to 2e-11