[Wed Feb 22 10:17:05 2012] Detection parameters:
  Position = (285.6, 280.1) = 1 4 34.25 -72 2 30.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 265.7 +/- 38.4
  Background counts = 546.9
  Rate = 0.01 +/- 0.002

[Wed Feb 22 10:17:05 2012] Off-axis axis estimate = 1.62'
[Wed Feb 22 10:28:12 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 10:28:12 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Wed Feb 22 10:28:12 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.068
[Wed Feb 22 10:28:12 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.24"
[Wed Feb 22 10:51:57 2012] fullrun_pn_xmm0412981301_pi300-10000_cl_pass0_src3.ximg exists
[Wed Feb 22 10:51:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412981301_pi300-10000_cl_pass0_src3.csv
[Wed Feb 22 10:51:57 2012] fullrun_pn_xmm0412981301_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Feb 22 10:51:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412981301_pi300-10000_cl_pass0_src3.csv
[Wed Feb 22 10:51:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412981301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412981301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 10:51:57 2012] fullrun_pn_xmm0412981301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Feb 22 10:51:57 2012] fullrun_pn_xmm0412981301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Feb 22 10:51:57 2012] Fit fullrun_pn_xmm0412981301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Feb 22 11:27:29 2012] Spatial fit model total counts = 6426.510000, observed total counts = 6417.000000
[Wed Feb 22 11:27:29 2012] Offset between fit and detection position for source 3 = 6.207599 pixels
[Wed Feb 22 11:27:29 2012] 6465.534000 total counts/ 5926.360000 bgd. counts: snr = 7.003819
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 6.207599 pixels
  Position = (279.7, 278.4) = 1 4 39.86 -72 2 38.8
  Extent = 14.5 (14.4-29.0)", rotation angle = 0
  Source counts = 539.2 +/- 80.4
  Background counts = 5926.4
  Rate = 0.02 +/- 0.003
[Wed Feb 22 11:27:29 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 11:27:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 11:27:29 2012] Assessing source extent using major axis lower bound
[Wed Feb 22 11:27:29 2012] Source does appear to be extended
[Wed Feb 22 11:27:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 11:27:29 2012] Source is confused with source 4
[Wed Feb 22 11:27:29 2012] Source is confused with source 5
[Wed Feb 22 11:27:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Feb 22 11:27:40 2012] Initial guess for spatial extent in simple fitting = 14.48"
[Wed Feb 22 11:27:40 2012] source mask rpix=3.3, npix_max = 58, mask sum = 56, frac = 0.955
[Wed Feb 22 11:27:40 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 14.48"
[Wed Feb 22 11:56:36 2012] fullrun_pn_xmm0412981301_pi300-10000_cl_pass1_src3.ximg exists
[Wed Feb 22 11:56:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412981301_pi300-10000_cl_pass1_src3.csv
[Wed Feb 22 11:56:36 2012] fullrun_pn_xmm0412981301_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Feb 22 11:56:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412981301_pi300-10000_cl_pass1_src3.csv
[Wed Feb 22 11:56:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412981301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412981301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 11:56:36 2012] fullrun_pn_xmm0412981301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Feb 22 11:56:36 2012] fullrun_pn_xmm0412981301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Feb 22 11:56:36 2012] Fit fullrun_pn_xmm0412981301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Feb 22 12:21:55 2012] Warning, spatial fit 3 centroid is now closest to src. 4
[Wed Feb 22 12:21:55 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 12:21:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 12:21:55 2012] Assessing source extent using major axis lower bound
[Wed Feb 22 12:21:55 2012] Source does appear to be extended
[Wed Feb 22 12:21:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 12:22:06 2012] XMMSAS src. selection expression = ellipse(24284.272000, 24168.218000, 868.656025, 868.656025, 0.000000, X, Y)
[Wed Feb 22 12:22:06 2012] Writing source region out to fullrun_pn_xmm0412981301_pi300-10000_pass1_cl_src3_src.reg
[Wed Feb 22 12:22:06 2012] Extracting stamp from image fullrun_pn_xmm0412981301_pi300-10000_cl_sm2.00.img.gz, (230, 228) - (330, 328)
[Wed Feb 22 12:22:06 2012] XMMSAS bgd. selection expression = annulus(24284.272000, 24168.218000, 1447.760042, 2895.520083, X, Y) && !ellipse(27217.235748, 26727.027069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27476.130000, 22278.456000, 1301.624037, 1301.624037, 0.000000, X, Y) && !ellipse(23631.496552, 24228.363068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25021.690000, 24219.810000, 1132.792033, 1132.792033, 0.000000, X, Y) && !ellipse(27806.801960, 25068.844600, 3159.360091, 3159.360091, 0.000000, X, Y)
[Wed Feb 22 12:22:06 2012] Writing fullrun_pn_xmm0412981301_pi300-10000_pass1_cl_src3.gif
[Wed Feb 22 12:44:14 2012] Mean detx,y = (295.53, 3374.92) 
[Wed Feb 22 12:44:24 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Feb 22 12:44:47 2012] Binned source spectrum to 10 counts/bin
[Wed Feb 22 12:44:48 2012] Setting source spectrum file to fullrun_pn_xmm0412981301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Feb 22 12:44:48 2012] Setting bgd. spectrum file to fullrun_pn_xmm0412981301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Feb 22 20:01:28 2012] Updating aperture counts using extracted products
[Wed Feb 22 20:01:28 2012] Error reading totcts from fullrun_pn_xmm0412981301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Feb 22 20:01:28 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 22 20:01:28 2012] Using photon index=1.80, rate=0.0176, arf fullrun_pn_xmm0412981301_pi300-10000_pass1_cl_src3.arf
[Wed Feb 22 20:01:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Feb 22 20:01:28 2012] Updating source flux to 4.7e-14
[Wed Feb 22 20:02:18 2012] Flag c found in src. 3 procflags, skipping spectral fitting