[Wed Feb 22 10:17:05 2012] Detection parameters:
  Position = (322.0, 257.7) = 1 3 59.99 -72 4 18.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 71.1 +/- 18.5
  Background counts = 529.3
  Rate = 0.004 +/- 0.001

[Wed Feb 22 10:17:05 2012] Off-axis axis estimate = 3.41'
[Wed Feb 22 10:28:12 2012] Using EEF radius (= 8.14 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 10:28:12 2012] Initial guess for spatial extent in simple fitting = 8.14"
[Wed Feb 22 10:28:12 2012] source mask rpix=1.9, npix_max = 22, mask sum = 18, frac = 0.801
[Wed Feb 22 10:28:12 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 8.14"
[Wed Feb 22 10:51:57 2012] fullrun_pn_xmm0412981301_pi300-10000_cl_pass0_src2.ximg exists
[Wed Feb 22 10:51:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412981301_pi300-10000_cl_pass0_src2.csv
[Wed Feb 22 10:51:57 2012] fullrun_pn_xmm0412981301_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Feb 22 10:51:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412981301_pi300-10000_cl_pass0_src2.csv
[Wed Feb 22 10:51:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412981301_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412981301_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 10:51:57 2012] fullrun_pn_xmm0412981301_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Feb 22 10:51:57 2012] fullrun_pn_xmm0412981301_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Feb 22 10:51:57 2012] Fit fullrun_pn_xmm0412981301_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Wed Feb 22 11:27:29 2012] Spatial fit model total counts = 4487.500000, observed total counts = 4727.000000
[Wed Feb 22 11:27:29 2012] Offset between fit and detection position for source 2 = 5.754347 pixels
[Wed Feb 22 11:27:29 2012] 5007.350000 total counts/ 3251.560000 bgd. counts: snr = 30.791205
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 5.754347 pixels
  Position = (316.4, 256.6) = 1 4 5.32 -72 4 13.3
  Extent = 16.3 (16.2-32.5)", rotation angle = 0
  Source counts = 1755.8 +/- 70.8
  Background counts = 3251.6
  Rate = 0.06 +/- 0.002
[Wed Feb 22 11:27:29 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 11:27:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 11:27:29 2012] Assessing source extent using major axis lower bound
[Wed Feb 22 11:27:29 2012] Source does appear to be extended
[Wed Feb 22 11:27:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 11:27:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Feb 22 11:27:40 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Feb 22 11:27:40 2012] Initial guess for spatial extent in simple fitting = 16.27"
[Wed Feb 22 11:27:40 2012] source mask rpix=3.7, npix_max = 71, mask sum = 61, frac = 0.848
[Wed Feb 22 11:27:40 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 16.27"
[Wed Feb 22 11:56:36 2012] fullrun_pn_xmm0412981301_pi300-10000_cl_pass1_src2.ximg exists
[Wed Feb 22 11:56:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412981301_pi300-10000_cl_pass1_src2.csv
[Wed Feb 22 11:56:36 2012] fullrun_pn_xmm0412981301_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Feb 22 11:56:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412981301_pi300-10000_cl_pass1_src2.csv
[Wed Feb 22 11:56:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412981301_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412981301_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 11:56:36 2012] fullrun_pn_xmm0412981301_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Feb 22 11:56:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412981301_pi300-10000_cl_pass1_tfrozen_src2.csv
[Wed Feb 22 11:56:36 2012] fullrun_pn_xmm0412981301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Feb 22 11:56:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0412981301_pi300-10000_cl_pass1_tfrozen_src2.csv
[Wed Feb 22 11:56:36 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0412981301_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0412981301_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 12:21:55 2012] Warning, spatial fit 2 centroid is now closest to src. 1
[Wed Feb 22 12:21:55 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 12:21:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 12:21:55 2012] Assessing source extent using major axis lower bound
[Wed Feb 22 12:21:55 2012] Source does appear to be extended
[Wed Feb 22 12:21:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 12:22:06 2012] Counts = 1755.790000, rescaling region sizes by 2.000000
[Wed Feb 22 12:22:06 2012] XMMSAS src. selection expression = ellipse(27476.130000, 22278.456000, 1952.436056, 1952.436056, 0.000000, X, Y)
[Wed Feb 22 12:22:06 2012] Writing source region out to fullrun_pn_xmm0412981301_pi300-10000_pass1_cl_src2_src.reg
[Wed Feb 22 12:22:06 2012] Extracting stamp from image fullrun_pn_xmm0412981301_pi300-10000_cl_sm2.00.img.gz, (204, 144) - (429, 369)
[Wed Feb 22 12:22:06 2012] XMMSAS bgd. selection expression = annulus(27476.130000, 22278.456000, 6508.120187, 13016.240375, X, Y) && !ellipse(27217.235748, 26727.027069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24284.272000, 24168.218000, 1158.208033, 1158.208033, 0.000000, X, Y) && !ellipse(23631.496552, 24228.363068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25021.690000, 24219.810000, 1132.792033, 1132.792033, 0.000000, X, Y) && !ellipse(27806.801960, 25068.844600, 3159.360091, 3159.360091, 0.000000, X, Y)
[Wed Feb 22 12:22:06 2012] Writing fullrun_pn_xmm0412981301_pi300-10000_pass1_cl_src2.gif
[Wed Feb 22 12:34:44 2012] Mean detx,y = (1911.22, 593.09) 
[Wed Feb 22 12:34:55 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Feb 22 12:38:31 2012] Binned source spectrum to 10 counts/bin
[Wed Feb 22 12:38:31 2012] Setting source spectrum file to fullrun_pn_xmm0412981301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Feb 22 12:38:31 2012] Setting bgd. spectrum file to fullrun_pn_xmm0412981301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Feb 22 20:01:28 2012] Updating aperture counts using extracted products
[Wed Feb 22 20:01:28 2012] Error reading totcts from fullrun_pn_xmm0412981301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Feb 22 20:01:28 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 22 20:01:28 2012] Using photon index=1.80, rate=0.0574, arf fullrun_pn_xmm0412981301_pi300-10000_pass1_cl_src2.arf
[Wed Feb 22 20:01:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Feb 22 20:01:28 2012] Updating source flux to 1.4e-13
[Wed Feb 22 20:03:52 2012] Reading fit data from xmm0412981301/analysis//spectral/fullrun_pn_xmm0412981301_pi300-10000_pass1_cl_src2_pl.csv
[Wed Feb 22 20:03:52 2012] Spectral fit parameter nH value = 1.72347e+12
[Wed Feb 22 20:03:52 2012] Spectral fit parameter PhoIndex value = 1.111
[Wed Feb 22 20:03:52 2012] Failed to get F(0.3-8.0) from xmm0412981301/analysis//spectral/fullrun_pn_xmm0412981301_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Wed Feb 22 20:03:52 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 22 20:03:52 2012] Using Nh = 1.7e+12, photon index=1.11, rate=0.0574, arf fullrun_pn_xmm0412981301_pi300-10000_pass1_cl_src2.arf
[Wed Feb 22 20:03:52 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Feb 22 20:03:52 2012] Updating source flux to 2.3e-13