[Wed Feb 22 10:17:54 2012] Detection parameters:
  Position = (320.3, 278.3) = 1 4 1.69 -72 2 30.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 241.0 +/- 23.1
  Background counts = 59.1
  Rate = 0.04 +/- 0.004

[Wed Feb 22 10:17:54 2012] Off-axis axis estimate = 2.15'
[Wed Feb 22 11:00:26 2012] Using EEF radius (= 7.51 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 11:00:26 2012] Initial guess for spatial extent in simple fitting = 7.51"
[Wed Feb 22 11:00:26 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.808
[Wed Feb 22 11:00:26 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.51"
[Wed Feb 22 11:27:27 2012] fullrun_mos2_xmm0412981301_pi300-10000_cl_pass0_src3.ximg exists
[Wed Feb 22 11:27:27 2012] fullrun_mos2_xmm0412981301_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Feb 22 11:27:27 2012] Fit fullrun_mos2_xmm0412981301_pi300-10000_cl_pass0_src3 appears to have run properly
[Wed Feb 22 11:27:27 2012] fullrun_mos2_xmm0412981301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Feb 22 11:27:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412981301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed Feb 22 11:27:27 2012] fullrun_mos2_xmm0412981301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Feb 22 11:27:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412981301_pi300-10000_cl_pass0_tfrozen_src3.csv
[Wed Feb 22 11:27:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412981301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412981301_pi300-10000_cl_pass0_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 11:27:34 2012] Source 2 is offset by -0.692990 and -7.225907 pixels which is larger than
2 X fitted extent = 5.220506 x 1.945398, not incorporating fit results
[Wed Feb 22 11:27:34 2012] Spatial fit model total counts = 2.898120, observed total counts = 162.000000
[Wed Feb 22 11:27:34 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Feb 22 11:27:34 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 11:27:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 11:27:34 2012] Assessing source extent using major
[Wed Feb 22 11:27:34 2012] Source does appear to be extended
[Wed Feb 22 11:27:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 12:08:15 2012] Using EEF radius (= 7.51 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 12:08:15 2012] Initial guess for spatial extent in simple fitting = 7.51"
[Wed Feb 22 12:08:15 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.808
[Wed Feb 22 12:08:15 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.51"
[Wed Feb 22 12:21:53 2012] fullrun_mos2_xmm0412981301_pi300-10000_cl_pass1_src3.ximg exists
[Wed Feb 22 12:21:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412981301_pi300-10000_cl_pass1_src3.csv
[Wed Feb 22 12:21:53 2012] fullrun_mos2_xmm0412981301_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Feb 22 12:21:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412981301_pi300-10000_cl_pass1_src3.csv
[Wed Feb 22 12:21:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412981301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412981301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 12:21:53 2012] fullrun_mos2_xmm0412981301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Feb 22 12:21:53 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0412981301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed Feb 22 12:21:53 2012] fullrun_mos2_xmm0412981301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Feb 22 12:21:53 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0412981301_pi300-10000_cl_pass1_tfrozen_src3.csv
[Wed Feb 22 12:21:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412981301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412981301_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 12:21:59 2012] Warning, spatial fit 3 centroid is now closest to src. 3
[Wed Feb 22 12:21:59 2012] Source 2 is offset by 3.064047 and -5.501218 pixels which is larger than
2 X fitted extent = 1.783122 x 1.783122, not incorporating fit results
[Wed Feb 22 12:21:59 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 12:21:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 12:21:59 2012] Assessing source extent using major
[Wed Feb 22 12:21:59 2012] Source does appear to be extended
[Wed Feb 22 12:21:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 19:51:08 2012] XMMSAS src. selection expression = ellipse(27814.304047, 24160.450073, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Feb 22 19:51:08 2012] Writing source region out to fullrun_mos2_xmm0412981301_pi300-10000_pass1_cl_src2_src.reg
[Wed Feb 22 19:51:08 2012] Extracting stamp from image fullrun_mos2_xmm0412981301_pi300-10000_cl_sm2.00.img.gz, (283, 241) - (358, 316)
[Wed Feb 22 19:51:08 2012] XMMSAS bgd. selection expression = annulus(27814.304047, 24160.450073, 1087.500000, 2175.000000, X, Y) && !ellipse(27802.173476, 25122.841961, 708.436820, 708.436820, 1.200000, X, Y) && !ellipse(27062.235138, 24005.136169, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Feb 22 19:51:08 2012] Writing fullrun_mos2_xmm0412981301_pi300-10000_pass1_cl_src2.gif
[Wed Feb 22 19:53:57 2012] Mean detx,y = (-511.77, -42.66) 
[Wed Feb 22 19:53:59 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Feb 22 19:54:16 2012] Binned source spectrum to 10 counts/bin
[Wed Feb 22 19:54:16 2012] Setting source spectrum file to fullrun_mos2_xmm0412981301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Feb 22 19:54:16 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412981301_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Wed Feb 22 20:00:08 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Feb 22 20:00:08 2012] rmf not generated due to insufficient counts
[Wed Feb 22 20:01:29 2012] Updating aperture counts using extracted products
[Wed Feb 22 20:01:29 2012] Error reading totcts from fullrun_mos2_xmm0412981301_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Wed Feb 22 20:01:29 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 22 20:01:29 2012] Using photon index=1.80, rate=0.0425, arf fullrun_mos2_xmm0412981301_pi300-10000_pass1_cl_src2.arf
[Wed Feb 22 20:01:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Feb 22 20:01:29 2012] Updating source flux to 4.1e-13
[Wed Feb 22 20:01:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting