[Wed Feb 22 10:17:26 2012] Detection parameters:
  Position = (311.2, 301.7) = 1 4 10.26 -72 0 54.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 61.2 +/- 15.2
  Background counts = 61.5
  Rate = 0.009 +/- 0.002

[Wed Feb 22 10:17:26 2012] Off-axis axis estimate = 0.95'
[Wed Feb 22 10:51:57 2012] Using EEF radius (= 6.90 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 10:51:57 2012] Initial guess for spatial extent in simple fitting = 6.90"
[Wed Feb 22 10:51:57 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.918
[Wed Feb 22 10:51:57 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 6.90"
[Wed Feb 22 11:00:26 2012] fullrun_mos1_xmm0412981301_pi300-10000_cl_pass0_src3.ximg exists
[Wed Feb 22 11:00:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412981301_pi300-10000_cl_pass0_src3.csv
[Wed Feb 22 11:00:26 2012] fullrun_mos1_xmm0412981301_pi300-10000_cl_pass0_src3_1.ximg exists
[Wed Feb 22 11:00:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412981301_pi300-10000_cl_pass0_src3.csv
[Wed Feb 22 11:00:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412981301_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412981301_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 11:00:26 2012] fullrun_mos1_xmm0412981301_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Wed Feb 22 11:00:26 2012] fullrun_mos1_xmm0412981301_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Wed Feb 22 11:00:26 2012] Fit fullrun_mos1_xmm0412981301_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Wed Feb 22 11:27:31 2012] Source 3 is offset by -6.184537 and 6.006619 pixels which is larger than
2 X fitted extent = 3.208233 x 3.208233, not incorporating fit results
[Wed Feb 22 11:27:31 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 11:27:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 11:27:31 2012] Assessing source extent using major
[Wed Feb 22 11:27:31 2012] Source does appear to be extended
[Wed Feb 22 11:27:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 11:56:36 2012] Using EEF radius (= 6.90 ")to estimate initial spatial extent for simple fitting
[Wed Feb 22 11:56:36 2012] Initial guess for spatial extent in simple fitting = 6.90"
[Wed Feb 22 11:56:36 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.918
[Wed Feb 22 11:56:36 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 6.90"
[Wed Feb 22 12:08:15 2012] fullrun_mos1_xmm0412981301_pi300-10000_cl_pass1_src3.ximg exists
[Wed Feb 22 12:08:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412981301_pi300-10000_cl_pass1_src3.csv
[Wed Feb 22 12:08:15 2012] fullrun_mos1_xmm0412981301_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Feb 22 12:08:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412981301_pi300-10000_cl_pass1_src3.csv
[Wed Feb 22 12:08:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412981301_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412981301_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Feb 22 12:08:15 2012] fullrun_mos1_xmm0412981301_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Feb 22 12:08:15 2012] fullrun_mos1_xmm0412981301_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Feb 22 12:08:15 2012] Fit fullrun_mos1_xmm0412981301_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Feb 22 12:21:57 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 24.797560 pixels away
[Wed Feb 22 12:21:57 2012] Source 3 is offset by -6.184537 and 6.006619 pixels which is larger than
2 X fitted extent = 3.378294 x 3.378294, not incorporating fit results
[Wed Feb 22 12:21:57 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 143.941068 pixels away
[Wed Feb 22 12:21:57 2012] Vigneting correction estimate = 1.000000
[Wed Feb 22 12:21:57 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Feb 22 12:21:57 2012] Assessing source extent using major
[Wed Feb 22 12:21:57 2012] Source does appear to be extended
[Wed Feb 22 12:21:57 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Feb 22 19:27:05 2012] XMMSAS src. selection expression = ellipse(27022.805298, 26195.715881, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Feb 22 19:27:05 2012] Writing source region out to fullrun_mos1_xmm0412981301_pi300-10000_pass1_cl_src3_src.reg
[Wed Feb 22 19:27:05 2012] Extracting stamp from image fullrun_mos1_xmm0412981301_pi300-10000_cl_sm2.00.img.gz, (274, 264) - (349, 339)
[Wed Feb 22 19:27:05 2012] XMMSAS bgd. selection expression = annulus(27022.805298, 26195.715881, 1087.500000, 2175.000000, X, Y) && !ellipse(27798.335000, 25084.415000, 1039.152030, 1039.152030, 0.000000, X, Y)
[Wed Feb 22 19:27:05 2012] Writing fullrun_mos1_xmm0412981301_pi300-10000_pass1_cl_src3.gif
[Wed Feb 22 19:31:02 2012] Mean detx,y = (-242.57, -1170.58) 
[Wed Feb 22 19:31:04 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Feb 22 19:31:28 2012] Binned source spectrum to 10 counts/bin
[Wed Feb 22 19:31:28 2012] Setting source spectrum file to fullrun_mos1_xmm0412981301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Feb 22 19:31:28 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412981301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Wed Feb 22 19:50:55 2012] Not generating rmf since there are only 61 counts
[Wed Feb 22 19:50:55 2012] rmf not generated due to insufficient counts
[Wed Feb 22 20:01:28 2012] Updating aperture counts using extracted products
[Wed Feb 22 20:01:28 2012] Error reading totcts from fullrun_mos1_xmm0412981301_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Wed Feb 22 20:01:29 2012] Calculating source flux in energy range 0.30-8.00
[Wed Feb 22 20:01:29 2012] Using photon index=1.80, rate=0.00917, arf fullrun_mos1_xmm0412981301_pi300-10000_pass1_cl_src3.arf
[Wed Feb 22 20:01:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Feb 22 20:01:29 2012] Updating source flux to 9e-14
[Wed Feb 22 20:01:30 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting