[Sat Jul 14 13:04:15 2012] Detection parameters:
  Position = (129.9, 248.1) = 1 6 18.55 -72 5 50.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 129.6 +/- 16.4
  Background counts = 14.2
  Rate = 0.004 +/- 0.0005

[Sat Jul 14 13:04:15 2012] Off-axis axis estimate = 12.75'
[Sat Jul 14 14:42:34 2012] Using EEF radius (= 12.81 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 14:42:34 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 14 14:42:34 2012] Initial guess for spatial extent in simple fitting = 12.81"
[Sat Jul 14 14:42:34 2012] source mask rpix=2.9, npix_max = 47, mask sum = 45, frac = 0.949
[Sat Jul 14 14:42:34 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 12.81"
[Sat Jul 14 15:55:06 2012] fullrun_mos2_xmm0412981001_pi300-10000_cl_pass0_src8.ximg exists
[Sat Jul 14 15:55:06 2012] fullrun_mos2_xmm0412981001_pi300-10000_cl_pass0_src8_1.ximg exists
[Sat Jul 14 15:55:06 2012] Fit fullrun_mos2_xmm0412981001_pi300-10000_cl_pass0_src8 appears to have run properly
[Sat Jul 14 15:55:06 2012] fullrun_mos2_xmm0412981001_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Sat Jul 14 15:55:06 2012] fullrun_mos2_xmm0412981001_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Sat Jul 14 15:55:06 2012] Fit fullrun_mos2_xmm0412981001_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Sat Jul 14 15:55:14 2012] Warning, spatial fit 8 centroid is now closest to src. 5
[Sat Jul 14 15:55:14 2012] Spatial fit model total counts = 425.189000, observed total counts = 405.000000
[Sat Jul 14 15:55:14 2012] Offset between fit and detection position for source 6 = 0.086715 pixels
[Sat Jul 14 15:55:14 2012] Warning, changing simple spatial fit ID from 8 to 14
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.086715 pixels
  Position = (129.8, 248.1) = 1 6 18.62 -72 5 47.4
  Extent = 22.3 (17.3-25.7)", rotation angle = 0
  Source counts = 407.8 +/- 20.2
  Background counts = 0.0
  Rate = 0.01 +/- 0.0007
 Deleting source due to low signal-to-noise ratio