[Sat Jul 14 13:03:33 2012] Detection parameters:
  Position = (276.3, 304.0) = 1 4 0.31 -72 1 49.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54294.4 +/- 400.7
  Background counts = 44.2
  Rate = 2 +/- 0.01

[Sat Jul 14 13:03:34 2012] Off-axis axis estimate = 1.65'
[Sat Jul 14 13:32:54 2012] Using EEF radius (= 7.26 ")to estimate initial spatial extent for simple fitting
[Sat Jul 14 13:32:54 2012] Initial guess for spatial extent in simple fitting = 7.26"
[Sat Jul 14 13:32:54 2012] source mask rpix=1.7, npix_max = 18, mask sum = 11, frac = 0.585
[Sat Jul 14 13:32:54 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.26"
[Sat Jul 14 14:42:33 2012] fullrun_mos1_xmm0412981001_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jul 14 14:42:33 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0412981001_pi300-10000_cl_pass0_src1.csv
[Sat Jul 14 14:42:33 2012] fullrun_mos1_xmm0412981001_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jul 14 14:42:33 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0412981001_pi300-10000_cl_pass0_src1.csv
[Sat Jul 14 14:42:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412981001_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412981001_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jul 14 14:42:33 2012] fullrun_mos1_xmm0412981001_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jul 14 14:42:33 2012] fullrun_mos1_xmm0412981001_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jul 14 14:42:33 2012] Fit fullrun_mos1_xmm0412981001_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jul 14 15:55:11 2012] Spatial fit model total counts = 110462.000000, observed total counts = 102872.000000
[Sat Jul 14 15:55:11 2012] Offset between fit and detection position for source 2 = 1.967727 pixels
[Sat Jul 14 15:55:11 2012] 109120.240000 total counts/ 7090.240000 bgd. counts: snr = 1211.706447
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.967727 pixels
  Position = (274.6, 303.0) = 1 4 1.90 -72 1 52.6
  Extent = 12.5 (12.5-12.5)", rotation angle = 0
  Source counts = 102030.0 +/- 330.3
  Background counts = 7090.2
  Rate = 3 +/- 0.01
[Sat Jul 14 15:55:11 2012] Spatial fit model total counts = 80443.400000, observed total counts = 87588.000000
[Sat Jul 14 15:55:11 2012] Offset between fit and detection position for source 2 = 1.142666 pixels
[Sat Jul 14 15:55:11 2012] Warning, changing simple spatial fit ID from 1 to 2
[Sat Jul 14 15:55:11 2012] 90943.000000 total counts/ 25600.000000 bgd. counts: snr = 408.393750
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.142666 pixels
  Position = (274.1, 302.0) = 1 4 2.41 -72 1 57.0
  Extent = 12.3 (12.3-12.3)", rotation angle = 0
  Source counts = 65343.0 +/- 301.6
  Background counts = 25600.0
  Rate = 2 +/- 0.01
[Sat Jul 14 15:55:11 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 15:55:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 15:55:11 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 15:55:11 2012] Source does appear to be extended
[Sat Jul 14 15:55:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 15:55:11 2012] Source is confused with source 1
[Sat Jul 14 16:06:03 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jul 14 16:06:03 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jul 14 16:06:03 2012] Initial guess for spatial extent in simple fitting = 12.27"
[Sat Jul 14 16:06:03 2012] source mask rpix=2.8, npix_max = 44, mask sum = 18, frac = 0.408
[Sat Jul 14 16:06:03 2012] Skipping simple spatial due to low active detector fraction
[Sat Jul 14 17:27:50 2012] Spatial fit model total counts = 79883.800000, observed total counts = 87588.000000
[Sat Jul 14 17:27:50 2012] Offset between fit and detection position for source 2 = 0.362860 pixels
[Sat Jul 14 17:27:50 2012] Warning, changing simple spatial fit ID from -1 to 1
[Sat Jul 14 17:27:50 2012] 89318.800000 total counts/ 23778.000000 bgd. counts: snr = 425.034396
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.362860 pixels
  Position = (274.1, 302.4) = 1 4 2.38 -72 1 55.4
  Extent = 13.0 (13.0-13.0)", rotation angle = 0
  Source counts = 65540.8 +/- 298.9
  Background counts = 23778.0
  Rate = 2 +/- 0.01
[Sat Jul 14 17:27:50 2012] Vigneting correction estimate = 1.000000
[Sat Jul 14 17:27:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jul 14 17:27:50 2012] Assessing source extent using major axis lower bound
[Sat Jul 14 17:27:50 2012] Source does appear to be extended
[Sat Jul 14 17:27:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 17:54:14 2012] Counts = 65540.800000, rescaling region sizes by 3.000000
[Sat Jul 14 17:54:14 2012] XMMSAS src. selection expression = ellipse(23800.548000, 26258.022800, 2344.716141, 2344.716141, 0.000000, X, Y)
[Sat Jul 14 17:54:14 2012] Writing source region out to fullrun_mos1_xmm0412981001_pi300-10000_pass1_cl_src2_src.reg
[Sat Jul 14 17:54:14 2012] Extracting stamp from image fullrun_mos1_xmm0412981001_pi300-10000_cl_sm2.00.img.gz, (139, 168) - (409, 437)
[Sat Jul 14 17:54:14 2012] XMMSAS bgd. selection expression = annulus(23800.548000, 26258.022800, 11723.580707, 23447.161413, X, Y) && !ellipse(23482.817566, 26051.019440, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(26078.740800, 26684.425600, 367.209611, 367.209611, 0.000000, X, Y) && !ellipse(37176.687140, 23326.711400, 479.046414, 479.046414, 0.000000, X, Y) && !ellipse(11689.039368, 22306.206818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11200.211304, 21187.045593, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 14 17:54:14 2012] Writing fullrun_mos1_xmm0412981001_pi300-10000_pass1_cl_src2.gif
[Sat Jul 14 17:54:22 2012] Mean detx,y = (367.53, -232.11) 
[Sat Jul 14 17:54:23 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 18:03:51 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 18:03:51 2012] Setting source spectrum file to fullrun_mos1_xmm0412981001_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jul 14 18:03:51 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412981001_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Jul 14 19:51:05 2012] Updating aperture counts using extracted products
[Sat Jul 14 19:51:05 2012] Error reading totcts from fullrun_mos1_xmm0412981001_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jul 14 19:51:05 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 19:51:05 2012] Using photon index=1.80, rate=2.19, arf fullrun_mos1_xmm0412981001_pi300-10000_pass1_cl_src2.arf
[Sat Jul 14 19:51:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 19:51:05 2012] Updating source flux to 2.4e-11
[Sat Jul 14 19:51:06 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Sat Jul 14 19:51:48 2012] Reading fit data from xmm0412981001/analysis//spectral/fullrun_mos1_xmm0412981001_pi300-10000_pass1_cl_src2_pl.csv
[Sat Jul 14 19:51:48 2012] Spectral fit parameter nH value = 7.65772e+21
[Sat Jul 14 19:51:48 2012] Spectral fit parameter PhoIndex value = 7.7472
[Sat Jul 14 19:51:48 2012] Failed to get F(0.3-8.0) from xmm0412981001/analysis//spectral/fullrun_mos1_xmm0412981001_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Sat Jul 14 19:51:48 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 19:51:48 2012] Using Nh = 7.7e+21, photon index=7.75, rate=2.19, arf fullrun_mos1_xmm0412981001_pi300-10000_pass1_cl_src2.arf
[Sat Jul 14 19:51:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 19:51:48 2012] Updating source flux to 1.4e-11