[Fri Jul 13 02:17:21 2012] Detection parameters:
  Position = (347.6, 299.0) = 1 3 37.32 -72 1 35.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3945.7 +/- 74.3
  Background counts = 25.1
  Rate = 0.1 +/- 0.003

[Fri Jul 13 02:17:21 2012] Off-axis axis estimate = 3.57'
[Fri Jul 13 02:30:20 2012] Using EEF radius (= 8.21 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 02:30:20 2012] Initial guess for spatial extent in simple fitting = 8.21"
[Fri Jul 13 02:30:20 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.877
[Fri Jul 13 02:30:20 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 8.21"
[Fri Jul 13 02:46:35 2012] fullrun_mos1_xmm0412980901_pi300-10000_cl_pass0_src2.ximg exists
[Fri Jul 13 02:46:35 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0412980901_pi300-10000_cl_pass0_src2.csv
[Fri Jul 13 02:46:35 2012] fullrun_mos1_xmm0412980901_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Jul 13 02:46:35 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0412980901_pi300-10000_cl_pass0_src2.csv
[Fri Jul 13 02:46:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412980901_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412980901_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 02:46:35 2012] fullrun_mos1_xmm0412980901_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Jul 13 02:46:36 2012] fullrun_mos1_xmm0412980901_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Jul 13 02:46:36 2012] Fit fullrun_mos1_xmm0412980901_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Fri Jul 13 03:24:39 2012] Spatial fit model total counts = 4213.250000, observed total counts = 4148.000000
[Fri Jul 13 03:24:39 2012] Offset between fit and detection position for source 5 = 0.083697 pixels
[Fri Jul 13 03:24:39 2012] 4172.170000 total counts/ 1431.770000 bgd. counts: snr = 72.423137
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.083697 pixels
  Position = (347.5, 299.0) = 1 3 37.41 -72 1 35.2
  Extent = 5.0 (4.8-5.2)", rotation angle = 0
  Source counts = 2740.4 +/- 64.6
  Background counts = 1431.8
  Rate = 0.1 +/- 0.002
[Fri Jul 13 03:24:39 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 03:24:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 03:24:39 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 03:24:39 2012] Source does appear to be extended
[Fri Jul 13 03:24:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 03:33:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jul 13 03:33:29 2012] Initial guess for spatial extent in simple fitting = 4.98"
[Fri Jul 13 03:33:29 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.110
[Fri Jul 13 03:33:29 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 4.98"
[Fri Jul 13 03:52:46 2012] fullrun_mos1_xmm0412980901_pi300-10000_cl_pass1_src2.ximg exists
[Fri Jul 13 03:52:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412980901_pi300-10000_cl_pass1_src2.csv
[Fri Jul 13 03:52:46 2012] fullrun_mos1_xmm0412980901_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Jul 13 03:52:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412980901_pi300-10000_cl_pass1_src2.csv
[Fri Jul 13 03:52:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412980901_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412980901_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 03:52:47 2012] fullrun_mos1_xmm0412980901_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Jul 13 03:52:47 2012] fullrun_mos1_xmm0412980901_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Jul 13 03:52:47 2012] Fit fullrun_mos1_xmm0412980901_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Fri Jul 13 04:36:15 2012] Spatial fit model total counts = 4214.350000, observed total counts = 4148.000000
[Fri Jul 13 04:36:15 2012] Offset between fit and detection position for source 5 = 0.000176 pixels
[Fri Jul 13 04:36:15 2012] 4173.340000 total counts/ 1429.560000 bgd. counts: snr = 72.568491
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.000176 pixels
  Position = (347.5, 299.0) = 1 3 37.41 -72 1 35.2
  Extent = 5.0 (4.8-5.2)", rotation angle = 0
  Source counts = 2743.8 +/- 64.6
  Background counts = 1429.6
  Rate = 0.1 +/- 0.002
[Fri Jul 13 04:36:15 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 04:36:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 04:36:15 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 04:36:15 2012] Source does appear to be extended
[Fri Jul 13 04:36:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 04:56:53 2012] Counts = 2743.780000, rescaling region sizes by 2.000000
[Fri Jul 13 04:56:53 2012] XMMSAS src. selection expression = ellipse(30187.120800, 25963.092000, 598.106417, 598.106417, 0.000000, X, Y)
[Fri Jul 13 04:56:53 2012] Writing source region out to fullrun_mos1_xmm0412980901_pi300-10000_pass1_cl_src5_src.reg
[Fri Jul 13 04:56:53 2012] Extracting stamp from image fullrun_mos1_xmm0412980901_pi300-10000_cl_sm2.00.img.gz, (313, 265) - (382, 333)
[Fri Jul 13 04:56:53 2012] XMMSAS bgd. selection expression = annulus(30187.120800, 25963.092000, 1993.688057, 3987.376115, X, Y) && !ellipse(27901.508800, 25556.744800, 3177.576091, 3177.576091, 0.000000, X, Y) && !ellipse(28123.219360, 25800.243958, 2610.000000, 2610.000000, 0.000000, X, Y) && !ellipse(27267.928223, 25170.115234, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 13 04:56:53 2012] Writing fullrun_mos1_xmm0412980901_pi300-10000_pass1_cl_src5.gif
[Fri Jul 13 05:12:00 2012] Mean detx,y = (2428.70, 502.47) 
[Fri Jul 13 05:12:00 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 13 05:12:32 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 13 05:12:32 2012] Setting source spectrum file to fullrun_mos1_xmm0412980901_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jul 13 05:12:32 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412980901_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri Jul 13 07:43:47 2012] Updating aperture counts using extracted products
[Fri Jul 13 07:43:47 2012] Error reading totcts from fullrun_mos1_xmm0412980901_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jul 13 07:43:47 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 13 07:43:47 2012] Using photon index=1.80, rate=0.0959, arf fullrun_mos1_xmm0412980901_pi300-10000_pass1_cl_src5.arf
[Fri Jul 13 07:43:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 13 07:43:47 2012] Updating source flux to 9.7e-13