[Fri Aug  3 05:03:57 2012] Detection parameters:
  Position = (277.6, 305.1) = 1 3 59.77 -72 1 55.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 55670.5 +/- 278.5
  Background counts = 85.2
  Rate = 2 +/- 0.01

[Fri Aug  3 05:03:57 2012] Off-axis axis estimate = 1.58'
[Fri Aug  3 05:18:52 2012] Using EEF radius (= 7.22 ")to estimate initial spatial extent for simple fitting
[Fri Aug  3 05:18:52 2012] Initial guess for spatial extent in simple fitting = 7.22"
[Fri Aug  3 05:18:52 2012] source mask rpix=1.7, npix_max = 18, mask sum = 15, frac = 0.804
[Fri Aug  3 05:18:52 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.22"
[Fri Aug  3 05:34:29 2012] fullrun_mos1_xmm0412980801_pi300-10000_cl_pass0_src1.ximg exists
[Fri Aug  3 05:34:29 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0412980801_pi300-10000_cl_pass0_src1.csv
[Fri Aug  3 05:34:29 2012] fullrun_mos1_xmm0412980801_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Aug  3 05:34:29 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0412980801_pi300-10000_cl_pass0_src1.csv
[Fri Aug  3 05:34:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412980801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412980801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug  3 05:34:29 2012] fullrun_mos1_xmm0412980801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Aug  3 05:34:29 2012] fullrun_mos1_xmm0412980801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Aug  3 05:34:29 2012] Fit fullrun_mos1_xmm0412980801_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Aug  3 06:04:28 2012] Spatial fit model total counts = 96453.500000, observed total counts = 89802.000000
[Fri Aug  3 06:04:28 2012] Offset between fit and detection position for source 2 = 2.061687 pixels
[Fri Aug  3 06:04:28 2012] 96552.780000 total counts/ 5043.580000 bgd. counts: snr = 1288.532277
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 2.061687 pixels
  Position = (275.6, 305.1) = 1 4 1.71 -72 1 54.3
  Extent = 12.7 (12.6-12.8)", rotation angle = 0
  Source counts = 91509.2 +/- 310.7
  Background counts = 5043.6
  Rate = 4 +/- 0.01
[Fri Aug  3 06:04:28 2012] Spatial fit model total counts = 88023.600000, observed total counts = 86662.000000
[Fri Aug  3 06:04:28 2012] Offset between fit and detection position for source 2 = 1.268557 pixels
[Fri Aug  3 06:04:28 2012] Warning, changing simple spatial fit ID from 1 to 2
[Fri Aug  3 06:04:28 2012] 84371.200911 total counts/ 0.700911 bgd. counts: snr = 100776.480011
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.268557 pixels
  Position = (274.6, 305.9) = 1 4 2.61 -72 1 50.7
  Extent = 13.7 (13.7-13.7)", rotation angle = 0
  Source counts = 84370.5 +/- 290.5
  Background counts = 0.7
  Rate = 3 +/- 0.01
[Fri Aug  3 06:04:28 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 06:04:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 06:04:28 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 06:04:28 2012] Source does appear to be extended
[Fri Aug  3 06:04:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug  3 06:04:28 2012] Source is confused with source 1
[Fri Aug  3 06:13:58 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug  3 06:13:58 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug  3 06:13:58 2012] Initial guess for spatial extent in simple fitting = 13.70"
[Fri Aug  3 06:13:58 2012] source mask rpix=3.1, npix_max = 53, mask sum = 38, frac = 0.713
[Fri Aug  3 06:13:58 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 13.70"
[Fri Aug  3 07:55:03 2012] fullrun_mos1_xmm0412980801_pi300-10000_cl_pass1_src1.ximg exists
[Fri Aug  3 07:55:03 2012] fullrun_mos1_xmm0412980801_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Aug  3 07:55:03 2012] Fit fullrun_mos1_xmm0412980801_pi300-10000_cl_pass1_src1 appears to have run properly
[Fri Aug  3 07:55:03 2012] fullrun_mos1_xmm0412980801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Aug  3 07:55:03 2012] fullrun_mos1_xmm0412980801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Aug  3 07:55:03 2012] Fit fullrun_mos1_xmm0412980801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Aug  3 08:09:45 2012] Spatial fit model total counts = 104751.000000, observed total counts = 98036.000000
[Fri Aug  3 08:09:45 2012] Offset between fit and detection position for source 2 = 1.211066 pixels
[Fri Aug  3 08:09:45 2012] 103773.520000 total counts/ 4570.620000 bgd. counts: snr = 1467.360453
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.211066 pixels
  Position = (275.7, 305.4) = 1 4 1.56 -72 1 52.7
  Extent = 14.2 (14.2-14.2)" x 13.9 (13.9-13.9)", rotation angle = 210 (210-210) degrees
  Source counts = 99202.9 +/- 322.1
  Background counts = 4570.6
  Rate = 4 +/- 0.01
[Fri Aug  3 08:09:45 2012] Vigneting correction estimate = 1.000000
[Fri Aug  3 08:09:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug  3 08:09:45 2012] Assessing source extent using major axis lower bound
[Fri Aug  3 08:09:45 2012] Source does appear to be extended
[Fri Aug  3 08:09:45 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.02
[Fri Aug  3 10:02:49 2012] Counts = 99202.900000, rescaling region sizes by 3.000000
[Fri Aug  3 10:02:49 2012] XMMSAS src. selection expression = ellipse(23939.545400, 26525.403000, 2558.556074, 2504.646072, 210.299000, X, Y)
[Fri Aug  3 10:02:49 2012] Writing source region out to fullrun_mos1_xmm0412980801_pi300-10000_pass1_cl_src2_src.reg
[Fri Aug  3 10:02:49 2012] Extracting stamp from image fullrun_mos1_xmm0412980801_pi300-10000_cl_sm2.00.img.gz, (129, 158) - (423, 452)
[Fri Aug  3 10:02:49 2012] XMMSAS bgd. selection expression = annulus(23939.545400, 26525.403000, 12792.780368, 25585.560736, X, Y) && !ellipse(23786.726200, 26416.374840, 3539.064102, 3539.064102, 0.000000, X, Y) && !ellipse(26190.488129, 26902.351929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11759.307800, 22471.399200, 1072.928031, 1072.928031, 0.000000, X, Y) && !ellipse(17716.843979, 14589.401337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11647.588600, 22435.549800, 2463.352071, 2463.352071, 0.000000, X, Y)
[Fri Aug  3 10:02:49 2012] Writing fullrun_mos1_xmm0412980801_pi300-10000_pass1_cl_src2.gif
[Fri Aug  3 10:03:06 2012] Mean detx,y = (321.32, -261.96) 
[Fri Aug  3 10:03:10 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Aug  3 10:15:48 2012] Binned source spectrum to 10 counts/bin
[Fri Aug  3 10:15:49 2012] Setting source spectrum file to fullrun_mos1_xmm0412980801_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Aug  3 10:15:49 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412980801_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri Aug  3 12:12:26 2012] Updating aperture counts using extracted products
[Fri Aug  3 12:12:26 2012] Error reading totcts from fullrun_mos1_xmm0412980801_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Aug  3 12:12:26 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug  3 12:12:26 2012] Using photon index=1.80, rate=3.96, arf fullrun_mos1_xmm0412980801_pi300-10000_pass1_cl_src2.arf
[Fri Aug  3 12:12:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug  3 12:12:26 2012] Updating source flux to 3.3e-11
[Fri Aug  3 12:12:28 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Fri Aug  3 12:16:16 2012] Reading fit data from xmm0412980801/analysis//spectral/fullrun_mos1_xmm0412980801_pi300-10000_pass1_cl_src2_pl.csv
[Fri Aug  3 12:16:16 2012] Spectral fit parameter nH value = 7.32211e+21
[Fri Aug  3 12:16:16 2012] Spectral fit parameter PhoIndex value = 7.49105
[Fri Aug  3 12:16:16 2012] Failed to get F(0.3-8.0) from xmm0412980801/analysis//spectral/fullrun_mos1_xmm0412980801_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Fri Aug  3 12:16:16 2012] Calculating source flux in energy range 0.30-8.00
[Fri Aug  3 12:16:16 2012] Using Nh = 7.3e+21, photon index=7.49, rate=3.96, arf fullrun_mos1_xmm0412980801_pi300-10000_pass1_cl_src2.arf
[Fri Aug  3 12:16:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Aug  3 12:16:16 2012] Updating source flux to 1.9e-11